similar to: wireless card for CentOS

I've just had a problem on one of my x86_64 boxes with openssl package. I have an 32-bit only application that requires openssl libraries. When I attempted to install openssl.i686 (in addition to already present openssl.x86_64), it failed. The rpm complained about conflicting files (they were all manpages), and I needed to use --force option to install the thing. The good folks

I've created kernel-isa and kernel-isasmp packages (currently i586, there'll be i686 version soon too). Basically, it is centosplus kernel with ISA Plug and Play, ISA and PCMCIA sound cards and ISA network cards enabled. The change to kernel spec file to add these two packages was fairly simple, and I hope this might find the way into centosplus kernel. If maintainer(s) of

Is it possible to have a route stick in the kernel, even if device it points to goes to roller coaster up and down drive. For example. I have an ADSL modem and am doing VPN over it. There's a route needed for VPN added like this: ip route add 192.168.1.0/24 via 1.2.3.4 src 192.168.2.1 There are two problems with it: a) if ADSL link is down when above command is executed, the route

I've found discussion about this in list archives, but no final answers. Many helpfull people wrote in the past how to avoid creating DVD (install from network, install from disk, boot this way, boot that way). But, I do need DVD, no way around it. No network, no USB, no floppy, no anything. Placing files on hard drive not an option. Just a DVD-ROM. By Googling around, I found some

RPMS's rebuilt or upstream one's used Hi I got a cleanly reinstalled 4.2 workstation. However i still needed to build the following SRPMS from Mandriva/Fedora :- - Chkrootkit - Logcheck - Tripwire - Xboard & Gnuchess - Rkhunter I needed to use the upstream versions of :- - OpenOffice.org 2.0.1 - RealPlayer Gold - Acrobat Reader I needed to tweak Bind chroot to log queries and

OK, I have managed to get software RAID 1 running on my wonderful Proliant server but now have two challenges: 1) Fresh after an OS install and reboot, the RAID array starts to do its stuff but straight away (as part of the boot messages) I am told that the second disk is 'not ready for command' and the system hangs as soon as resyncing starts. I think this is fixed by adding an hdparm

I'm attempting to build some PECL modules on fully updated CentOS 4.2 system. Preferably pack them into nice RPM packages. However, seems I'm missing something. For example, this is what I get for sqlite module: $ pear makerpm SQLite-1.0.3.tgz `phpize' failed The php-devel package is installed (so I do have phpize command). It's just that it is failing. If I unpack the

Hi all, I'm trying to get Cacti installed on my CentOS 4.3 x86_64 box. I've got all of required packages installed, and created database file, and followed all the instructions in install manual. However, when I get login screen and use admin for username/password, it simply redirects me straight back to login screen. Looking at user_log table, the authentication was

Tripwire is probably one of must-have utilities for many system administrators. However, it is missing from almost all recent Red Hattish distributions. IMO, probably due to the fact that source compiles only on i386, and needs patches to compile almost every time new major version of gcc is released. However, in absence of good replacement, this is all we have. (IMO, other tools such as AIDE

I want to mirror an existing 40GB data only drive using software Raid1 on my new CentOS 4 server. The existing drive is connected to a Promise Ultra 100 TX2 controller (non-raid). I have read about mdadm and understand how to create the Raid1 on /dev/mdxx devices. However I would like to know if the existing data on the orignal 40GB drive in the system will be destroyed when I create the raid with

I have just installed centos 4 on a spare box - working great. Until now, I have been using Fedora Core3. I wish to move all of my mail, address book and bookmarks created in Thunderbird and Firefox from the Fedora system to the new Centos system. Would someone kindly point me in the right direction, I am relatively new at linux. Many thanks for any assistance. christian

Don't remember if I already wrote about this. But ran into it tonibhg again. Logwatch as distributed with CentOS expects yum log files in different format. As result, logwatch will not report anything. The patch is really simple (and attached). Hopefully it'll be part of 4.3 (if not sooner). The upstream is not likely to patch it, since they don't distribute yum at all.

I've just attempted to reinstall my ancient laptop that has Pentium MMX processor. Since it is ancient, I've decided to go with CentOS 2.1. Got stuck, installer claims I need at least i686. Hmmm... I know that 3.8 and 4.4 work without a glitch on i586, so this came as surprise. I even thing original RHEL2.1 might had support for i586 too (but I might be wrong). Anyhow, what

Last couple of days some of my hosts were probed for UDP port 500 (IKE daemon, used by IPSec for key exchange) from dialup IPs. Don't remember seeing similar probes before. Some new vaulnerability that script kiddies (and pro crackers) are trying out, or is this some old stuff? I do remember there were some security problems with racoon in the past (that were fixed in current CentOS

Hi i need to install php when i download and install the cacti it say that and i can not find any pure php rpm but it is an php-excel and so on, what php should i use ? the yum command do noit find any php to update since i have php installed than it complains that it needs php-pear and i am in the same situation and i have several to choose among ..., php-ldap is missing ... Matthias Nilsson

A friend has an old Pentium-133 laptop with 32MB of memory and a 1.3 GB hard disk that he wants to use as a web server for a very small community. Will CentOS (or any other RHEL derived distribution for that matter) install and run with acceptable performance on such a system, or will a specialized distribution like Damn Small Linux be a better choice? In this case, disk space is not a big

Hi, I'm having a grief with Seagate FreeAgent Pro drive connected to CentOS 4 box via USB. The problem is that drive is factory configured to take a nap (spin down) after some 15-20 minutes of inactivity, and there doesn't seem to be a way to disable it. Since it's USB connected, hdparm can't be used on it. Getting the drive out of the case is not an option either, since it

As subject says. I just noticed that Anaconda allows x86_64 CD/DVD to be used to install i386 system (using network installation, of course). This is basically broken. For example, yum will believe that it is installed on x86_64, not on i386. So when you do for example yum update, it will try to install x86_64 packages on i386 system. Which isn't going to fly, since installed

Attempting to build OpenOffice 2 on CentOS 4 from rawhide (future FC5) SRPM. The spec file has EL4 target (which is nice), and I got almost all dependencies in place (mostly from 4.2beta and some from rawhide). However, I'm missing the ant package. Ant from rawhide doesn't compile since it is already gcc 4 based (fails on dependencies, getting it to use gcc4 instead of gcc seems like

Hi, I'm about to buy new video card, and was looking at ATI PCI-E Radeon X550. However, I don't see that particular chipset mentioned anywhere in docs. The X300 is there, as well as X600 and X800. Does anybody have Radeon X550 card running under CentOS 4? With 3D acceleration? Thanks, Aleksandar Milivojevic ---------------------------------------------------------------- This