similar to: Network problems with Centos 5 xen kernel

Hi. I have been following another thread describing problems uploading printer drives - but I think I have a different problem. In my case I have a Samsung CLP510 colour laser physically connected to a Centos 5.1 X86-64 Linux box with Samba 3.0251514 (3.0.25b-1.el5_1.4

Executive Summary: Realtek has an r1000 driver for the rtl8110sc NIC at http://www.realtek.com.tw/downloads I've posted this in the forums but it looks like all the action for CentOS really happens here on the mailing list. Plus I hope this might help some other lost soul since google failed to connect this motherboard to *any* mention of the r1000. I thought I found a great little

Bill, your CentOS 5 RTL8110 page should probably be updated. I've confirmed that there's a newer r8169 driver in the kernel that works with the RTL8110. RealTek's web site now carries the new r8169 instead of the r1000. The newer driver fixed a problem I was having on one host so we should probably recommend it over the older r1000. I've updated my CentOS 4 page. Kirk Bocek

Could I get write access to http://wiki.centos.org/HardwareList/CentOS5/RealTek/r1000? There's a couple of things I'd like to copy over from my CentOS4 R1000 page. Wiki Name: kirkbocek Thanks, Kirk Bocek

I'd like to add a page for the Realtek r1000 NIC driver for the RTL8110SC (and others) chipset. This driver is not included in the kernel. I've previously posted to the general mail list: http://lists.centos.org/pipermail/centos/2007-February/075383.html I'm guessing this would go in the HardwareList section. Otherwise a page titled 'Realtek r1000 Driver' would work. my

Hello: I'm having issues with my CentOS 5.1/Xen installation. If I run the xen-bridge, I seem to get flaky ethernet. By flaky I mean everything seems fine from the host machine, but if I attempt to contact the host machine from another remote machine (eg. my laptop which is on the same subnet as the xen machine, separated by 10 ft of cable and a router) I either get extremely high ping

Hello: I'm having issues with my CentOS 5.1/Xen installation. If I run the xen-bridge, I seem to get flaky ethernet. By flaky I mean everything seems fine from the host machine, but if I attempt to contact the host machine from another remote machine (eg. my laptop which is on the same subnet as the xen machine, separated by 10 ft of cable and a router) I either get extremely high ping

What is the difference between these two fragments (taken from two different tblgen record dumps)? dag OutOperandList = (outs GPR:$rd); dag OutOperandList = (outs R2); The first is from the RISCV backend record dump. There will be a substitution at some point for $rd. In the second, I'm specifying R2, no substitution necessary. If I specify GPR64:R2 or i64:R2 in my Instruction def,

Hello I've just been hit by one of the chipsets described at http://wiki.centos.org/HardwareList/RealTekRTL8111b. Because a) it does not work with the stock driver included in Centos 5.1 and b) I am very lazy and I do not like manually compiling modules each time a new kernel is installed (not to mention that I never forget anything, except for the important things which always go

Howdy, It appears that CentOS 5.2's support for the RTL8111B/C chip is incomplete. The wiki has some blanket statements regarding this support: http://wiki.centos.org/AdditionalResources/HardwareList/CentOS5/RealTek/r1000 http://wiki.centos.org/AdditionalResources/HardwareList/RealTekRTL8111b I could dive in an make the changes *I* think need to happen but I'd like to talk to people

On Tue, 2007-09-04 at 23:32 +0100, Karanbir Singh wrote: > Hi, > > Phil Schaffner wrote: > > Karanbir provided driver disk images and indicated that kmod drivers > > would be in CentOS-5 Extras, but apparently these never materialized. > > The only src.rpm I could turn up was the last link above, and I did get > > CentOS-5 x86_64 kmod-style drivers to build from

Hello, I am building a DRBD cluster with CentOS 4.4. Both nodes have RTL8169S-32 cards, Pheenet branded. I'm getting no more than 185 Mbps with the driver selected at installation (r8169). Downloading Realtek's r1000 climbs to some amazing 200Mbps. I am measuring performance with iperf, host to host, with a cat5e direct cable some 2.5ft long. Maybe disk I/O will be the bottleneck in my use

I'd like to add a page for the Realtek RTL8111b NIC. I'm not sure how you'd like to organize it since the page really could be relevant to both CentOS 4 and CentOS 5. I think a single page like: http://wiki.centos.org/HardwareList/RealTekRTL8111b Would work with links to both CentOS 4 *and* CentOS 5? However, if the wiki admins want two pages, that'll be fine too. Can you also

Objet : Xend start and after lose network Hi everybody : My configuration : Dapper 6.06 LTS with all updates Xen 3.0.2.2 My problem : After making ''xend start'', I lose network connections between my server and local network or internet. Nota : domU cas normally access to network I read about a similar problem in the bugtracker (N. 62) but it seems that this is normally

This patch adds an ACM hook into the network scripts (/etc/xen/scripts). It adds iptables rules that enforce mandatory access control on network packets exchanged between virtual interfaces. If ACM is active, this patch sets the default FORWARD policy in Dom0 to DROP and adds iptables ACCEPT rules between vifs that belong to domains that are permitted to share (determined by using the

Hi all, when I make a polygon with 100,000 vertices my X-server is being killed. This occurs in R-2.9.0 and a freshly installed R-2.10.0 I'm running Ubuntu with a locally compiled R: uname -a Linux onyx 2.6.24-24-generic #1 SMP Tue Aug 18 16:22:17 UTC 2009 x86_64 GNU/Linux xlower = -2e6:2e6 xupper = rev(xlower) ylower = runif(length(xlower)) yupper = ylower+.1

Hi. I'm seeing some issues where Entourage clients can see new mail, download it (or partially), but won't display the mail in the mailbox list. Mail shows up as having arrived, but never displays. These clients have worked in the past with versions of 0.99, but not in 1.0-test-56. I have dumped the connection traffic and it looks like Entourage aborts the IMAP session before it

Hello everybody, I have an odd problem with iptables using a Xen bridge setup. I don''t know if it would be better to post to netfilter Mailing-List. But I hope someone here know how to solve it. If it''s OT here, please let me know. I''ll try to do a little bit ASCII-Graphics to explain the topo better: _________ ________

Hello, I have been told on Freenode's #dovecot to ask here. I have Exim 4.92 complaining about "Non-CRLF-terminated header, under CHUNKING: message abandoned" with redirects made by Pigeonhole 0.5.5 (with Dovecot 2.3.5.1). Please find relevant part of the traffic below, and help me determine whether Exim is correct on this. ? 0x0000:? 4500 0954 0000 4000 8006 0000 7f00 0001? E..T..

Full_Name: Ludo Pagie Version: 2.10.0 OS: linux, ubuntu, 8.04 Submission from: (NULL) (83.163.218.221) when I make a polygon with 100,000 vertices my X-server is being killed. This occurs in R-2.9.0 and a freshly installed R-2.10.0 I'm running Ubuntu with a locally compiled R: uname -a Linux onyx 2.6.24-24-generic #1 SMP Tue Aug 18 16:22:17 UTC 2009 x86_64 GNU/Linux xlower = -2e6:2e6