similar to: r8169 Update

Howdy, It appears that CentOS 5.2's support for the RTL8111B/C chip is incomplete. The wiki has some blanket statements regarding this support: http://wiki.centos.org/AdditionalResources/HardwareList/CentOS5/RealTek/r1000 http://wiki.centos.org/AdditionalResources/HardwareList/RealTekRTL8111b I could dive in an make the changes *I* think need to happen but I'd like to talk to people

Could I get write access to http://wiki.centos.org/HardwareList/CentOS5/RealTek/r1000? There's a couple of things I'd like to copy over from my CentOS4 R1000 page. Wiki Name: kirkbocek Thanks, Kirk Bocek

I'd like to add a page for the Realtek r1000 NIC driver for the RTL8110SC (and others) chipset. This driver is not included in the kernel. I've previously posted to the general mail list: http://lists.centos.org/pipermail/centos/2007-February/075383.html I'm guessing this would go in the HardwareList section. Otherwise a page titled 'Realtek r1000 Driver' would work. my

I'd like to add a page for the Realtek RTL8111b NIC. I'm not sure how you'd like to organize it since the page really could be relevant to both CentOS 4 and CentOS 5. I think a single page like: http://wiki.centos.org/HardwareList/RealTekRTL8111b Would work with links to both CentOS 4 *and* CentOS 5? However, if the wiki admins want two pages, that'll be fine too. Can you also

Hello: I'm having issues with my CentOS 5.1/Xen installation. If I run the xen-bridge, I seem to get flaky ethernet. By flaky I mean everything seems fine from the host machine, but if I attempt to contact the host machine from another remote machine (eg. my laptop which is on the same subnet as the xen machine, separated by 10 ft of cable and a router) I either get extremely high ping

Hello I've just been hit by one of the chipsets described at http://wiki.centos.org/HardwareList/RealTekRTL8111b. Because a) it does not work with the stock driver included in Centos 5.1 and b) I am very lazy and I do not like manually compiling modules each time a new kernel is installed (not to mention that I never forget anything, except for the important things which always go

Hello: I'm having issues with my CentOS 5.1/Xen installation. If I run the xen-bridge, I seem to get flaky ethernet. By flaky I mean everything seems fine from the host machine, but if I attempt to contact the host machine from another remote machine (eg. my laptop which is on the same subnet as the xen machine, separated by 10 ft of cable and a router) I either get extremely high ping

Dear All, I have an onboard Realtek RTL8111/8168B NIC. from lspci -vv : 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) It is detected, but why the speed is always 100Mbps, already change cable but still no luck. I use ethtool and from the output it seems that system know that this NIC support gigabit speed : ???????

Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process. I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message. ?Any help on how I can configure correctly this ethernet device? This are the data that I have: # lspci

What is the difference between these two fragments (taken from two different tblgen record dumps)? dag OutOperandList = (outs GPR:$rd); dag OutOperandList = (outs R2); The first is from the RISCV backend record dump. There will be a substitution at some point for $rd. In the second, I'm specifying R2, no substitution necessary. If I specify GPR64:R2 or i64:R2 in my Instruction def,

Executive Summary: Realtek has an r1000 driver for the rtl8110sc NIC at http://www.realtek.com.tw/downloads I've posted this in the forums but it looks like all the action for CentOS really happens here on the mailing list. Plus I hope this might help some other lost soul since google failed to connect this motherboard to *any* mention of the r1000. I thought I found a great little

username: RiaanVanNiekerk What page detailing official vendor support statements for CentOS, actual/current, pending or requested. E.g. using as a base content available on http://blog.danieldk.org/post/2008/04/09/CentOS-vendor-support Where At http://wiki.centos.org/, under Additional Resources, a new page for Software (similar to HardwareList) What fix http://wiki.centos.org/FAQ/General ,

Hi, I have a new mainboard with a Realtek RTL8111B / RTL8168B NIC. In 5.1 are no driver integrated for this nic, but there is driver disk: http://wiki.centos.org/HardwareList/RealTekRTL8111b and http://wiki.centos.org/HardwareList/RealTekRTL8111b?action=AttachFile&do=get&target=r8168-2.6.18-53.el5-i686-x86_64.img.zip Can I integrate this driver do the CentOS 5.1 ISO or can i use this

Hi List, The hardware list page on the Wiki: http://wiki.centos.org/AdditionalResources/HardwareList says: "I'd like to see this page as an entry point for hardware that does not work with CentOS out of the box or only with some effort. I do not see a need for a list which states all working hardware." I'd like to ask if we can make a small exception to that rule for

I've installed CentOS 5.5, fixed my problems with my network card driver, and and I've followed this: http://wiki.centos.org/AdditionalResources/HardwareList/AtiDriver , downladed latest ati driver, restarted, screen resolution is fixed, but everything lags. ATI Radeon HD 5470 1GB this is the output of "lspci -v" *01:00.0 VGA compatible controller: ATI Technologies Inc

Hello, I am building a DRBD cluster with CentOS 4.4. Both nodes have RTL8169S-32 cards, Pheenet branded. I'm getting no more than 185 Mbps with the driver selected at installation (r8169). Downloading Realtek's r1000 climbs to some amazing 200Mbps. I am measuring performance with iperf, host to host, with a cat5e direct cable some 2.5ft long. Maybe disk I/O will be the bottleneck in my use

I would like to add an entry for the Logitech QuickCam Communicate STX to this page: http://wiki.centos.org/AdditionalResources/HardwareList/Webcams Thank you. Marko

Ralph, http://wiki.centos.org/Nvidia_Graphics_on_CentOS I need edit rights for this page or do you prefer us to use http://wiki.centos.org/HardwareList/NvidiaDriver and finish that up. It is under the CentOS 4 section also. There is going to be three different ways to do the nvidia install. As in 3 different driver installs. We can create and use the new page and let be none public until it is

Hi all, I've recently upgraded a system from CentOS 4.4 to CentOS5, and now when the system boots, the r8169 ethernet card doesn't come up. After the boot sequence, if I type "ifup eth1 | ifup eth1.10 | ifup eth1.203" then the adapter starts up ok. It seems to be something with the boot sequence it loads the ethernet adapters a different way around (ie 4.4 eth0 is now

I have no output in the logs, but /etc/init.d/network restart fixes the issue. I am rsync/scp (10GB) data from one 100MB Full duplex host to an ASUS M3A78-EM (RTL8111B/C). It locks up around the 1.5GB Tx mark. If I ethtool -s eth0 autoneg off speed 100 duplex full it does not happen again. Ideas? -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- -