similar to: rpm for r8168

Howdy, It appears that CentOS 5.2's support for the RTL8111B/C chip is incomplete. The wiki has some blanket statements regarding this support: http://wiki.centos.org/AdditionalResources/HardwareList/CentOS5/RealTek/r1000 http://wiki.centos.org/AdditionalResources/HardwareList/RealTekRTL8111b I could dive in an make the changes *I* think need to happen but I'd like to talk to people

Hi, I have a new mainboard with a Realtek RTL8111B / RTL8168B NIC. In 5.1 are no driver integrated for this nic, but there is driver disk: http://wiki.centos.org/HardwareList/RealTekRTL8111b and http://wiki.centos.org/HardwareList/RealTekRTL8111b?action=AttachFile&do=get&target=r8168-2.6.18-53.el5-i686-x86_64.img.zip Can I integrate this driver do the CentOS 5.1 ISO or can i use this

Dear All, I have an onboard Realtek RTL8111/8168B NIC. from lspci -vv : 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) It is detected, but why the speed is always 100Mbps, already change cable but still no luck. I use ethtool and from the output it seems that system know that this NIC support gigabit speed : ???????

Hello I would like to make a HOWTO: fix the realtek network card on the asus eee box. Centos 5.2 detects it as r8186 but it doesn't work right out of the box. Thanks to #centos and google I was able to get it to work. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have a really strange problem with a driver disk (http://wiki.centos.org/HardwareList/RealTekRTL8111b) on amd64. I'm remotly booting the system via isolinux-files, so I unfortunatly do not have access to relevant logs, all I can see the the primary console/screen. With i386, the driver disk works just fine and I can install via http. But with amd64, the installer complains no driver

I'd like to add a page for the Realtek RTL8111b NIC. I'm not sure how you'd like to organize it since the page really could be relevant to both CentOS 4 and CentOS 5. I think a single page like: http://wiki.centos.org/HardwareList/RealTekRTL8111b Would work with links to both CentOS 4 *and* CentOS 5? However, if the wiki admins want two pages, that'll be fine too. Can you also

Could I get write access to http://wiki.centos.org/HardwareList/CentOS5/RealTek/r1000? There's a couple of things I'd like to copy over from my CentOS4 R1000 page. Wiki Name: kirkbocek Thanks, Kirk Bocek

Bill, your CentOS 5 RTL8110 page should probably be updated. I've confirmed that there's a newer r8169 driver in the kernel that works with the RTL8110. RealTek's web site now carries the new r8169 instead of the r1000. The newer driver fixed a problem I was having on one host so we should probably recommend it over the older r1000. I've updated my CentOS 4 page. Kirk Bocek

Processing commands for control at bugs.debian.org: > user debian-qa at lists.debian.org Setting user to debian-qa at lists.debian.org (was anbe at debian.org). > tags 714794 - moreinfo Bug #714794 {Done: Gilles Filippini <pini at debian.org>} [release.debian.org] pu: package sikuli/1.0~x~rc3.tesseract3-dfsg1-5+deb7u1 Removed tag(s) moreinfo. > tags 710035 - moreinfo Bug #710035

Ralph, Akemi, and Ned http://wiki.centos.org/HardwareList/Nvidia_Graphics That will be the Link. -- ~/john OpenPGP Sig:BA91F079

I'd like to add a page for the Realtek r1000 NIC driver for the RTL8110SC (and others) chipset. This driver is not included in the kernel. I've previously posted to the general mail list: http://lists.centos.org/pipermail/centos/2007-February/075383.html I'm guessing this would go in the HardwareList section. Otherwise a page titled 'Realtek r1000 Driver' would work. my

On 16/02/2019 02:43, Saurabh Nanda via samba wrote: >>> 2) Is this normal -- fs/cifs/smb2misc.c: Calculated size 157 length 156 >>> mismatch mid 11907 >> Could be a bug or miscalculated length + non critical warning, I also >> see this on master kernel. Either way I doubt it's slowing everything down. >> > Should I file a bug for this? > > >>

Hi, Running Transaction ? Updating?????? : selinux-policy?????????????????????????????????????????? 1/6 ? Updating?????? : kmod-r8168?????????????????????????????????????????????? 2/6 Working. This may take some time ... An hour later, still working... S+?? 10:51?? 0:08? |?????????? \_ /usr/bin/python /usr/bin/yum update S+?? 10:53?? 0:00? |?????????????? \_ /bin/sh /var/tmp/rpm-tmp.9003 2

Hello, We can see # lspci 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) I have used a custom kernel to start with centos 5.1 as an initial installation Our customer on this kernel has experienced slow pref on samba shares (50 seconds to open a file) So I have decided to updrade to centos 5.2 that have the right

http://wiki.centos.org/ToDo I come accross this: ""Add pages for nvidia / ati support ? maybe a howto for each ? * Should be put into the HardwareList. If sh ./install.bin is enough, I'll give it a shot later on. * ATI is there. I cannot do nvidia at the moment, as I cannot stop X on my nvidia machine (which is at work)."" I could

I've created a new CentOS wiki page for the Realtek RTL8111B and related NICs: http://wiki.centos.org/HardwareList/RealTekRTL8111b There's also a driver disk for CentOS 4.5 and 5.0. Kirk Bocek

Greetings list! Because of the sheer number of box (re)installations we do that have a CentOS base, I've converted our provisioning process to PXE. However, I've found that an alarming number of motherboards are coming with the Realtek RTL8168 ethernet controller onboard. When the system boots, it cannot find an ethernet controller and the installer process hangs. I made a new initrd

Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process. I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message. ?Any help on how I can configure correctly this ethernet device? This are the data that I have: # lspci

Hi all, Another FYI-mail (and just to verify that I'm not going insane here); I recently purchased an ASUS M3A78-EMH HDMI -board with a tri-core Phenom. This is a small uATX-board with all the garnish integrated motherboards are supposed to come with, and fairly well supported in CentOS 5 and other modern distros. When I installed it (~2 months ago) the NIC was not supported; Ethernet

Hi, I am trying to install centos on the intel D945GCLF board. It's a mini-ITX board with the atom processor and it uses the Realtek RTL8102EL LAN chipset. When I disable the on-board LAN card it installs and runs OK, but when I enable it, I get kernel panic at boot. The board runs perfectlj with Fedora 9 (with the latest kernel) or with Ubuntu server. My question is: is there some way