similar to: RTL8111 Wiki Pages

Hello I've just been hit by one of the chipsets described at http://wiki.centos.org/HardwareList/RealTekRTL8111b. Because a) it does not work with the stock driver included in Centos 5.1 and b) I am very lazy and I do not like manually compiling modules each time a new kernel is installed (not to mention that I never forget anything, except for the important things which always go

Hi, I have a new mainboard with a Realtek RTL8111B / RTL8168B NIC. In 5.1 are no driver integrated for this nic, but there is driver disk: http://wiki.centos.org/HardwareList/RealTekRTL8111b and http://wiki.centos.org/HardwareList/RealTekRTL8111b?action=AttachFile&do=get&target=r8168-2.6.18-53.el5-i686-x86_64.img.zip Can I integrate this driver do the CentOS 5.1 ISO or can i use this

Dear All, I have an onboard Realtek RTL8111/8168B NIC. from lspci -vv : 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) It is detected, but why the speed is always 100Mbps, already change cable but still no luck. I use ethtool and from the output it seems that system know that this NIC support gigabit speed : ???????

I'd like to add a page for the Realtek RTL8111b NIC. I'm not sure how you'd like to organize it since the page really could be relevant to both CentOS 4 and CentOS 5. I think a single page like: http://wiki.centos.org/HardwareList/RealTekRTL8111b Would work with links to both CentOS 4 *and* CentOS 5? However, if the wiki admins want two pages, that'll be fine too. Can you also

Bill, your CentOS 5 RTL8110 page should probably be updated. I've confirmed that there's a newer r8169 driver in the kernel that works with the RTL8110. RealTek's web site now carries the new r8169 instead of the r1000. The newer driver fixed a problem I was having on one host so we should probably recommend it over the older r1000. I've updated my CentOS 4 page. Kirk Bocek

Hi, I have a really strange problem with a driver disk (http://wiki.centos.org/HardwareList/RealTekRTL8111b) on amd64. I'm remotly booting the system via isolinux-files, so I unfortunatly do not have access to relevant logs, all I can see the the primary console/screen. With i386, the driver disk works just fine and I can install via http. But with amd64, the installer complains no driver

Hello I would like to make a HOWTO: fix the realtek network card on the asus eee box. Centos 5.2 detects it as r8186 but it doesn't work right out of the box. Thanks to #centos and google I was able to get it to work. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Could I get write access to http://wiki.centos.org/HardwareList/CentOS5/RealTek/r1000? There's a couple of things I'd like to copy over from my CentOS4 R1000 page. Wiki Name: kirkbocek Thanks, Kirk Bocek

I am experiencing poor network performance on Dom0. When i ping other hosts on the same LAN, packets are out of order, and they show response times ranging from < 1 ms to several seconds, and some packets get lost. For example, a typical ping result looks like this: 87 packets transmitted, 80 received, +3 errors, 8% packet loss, time 86038ms rtt min/avg/max/mdev =

Hi, I was asking about php 5.2 because I would like to use this program with these requirements: http://www.magentocommerce.com/system-requirements This ecommerce store is built with the zend framework and requires php 5.2. Mcrypt is not in the centos mirrors either. I did manage to get this beta ecommerce store installed on php 5.1.6-12 by removing the mycript line in the install xml file and

I've created a new CentOS wiki page for the Realtek RTL8111B and related NICs: http://wiki.centos.org/HardwareList/RealTekRTL8111b There's also a driver disk for CentOS 4.5 and 5.0. Kirk Bocek

I'd like to add a page for the Realtek r1000 NIC driver for the RTL8110SC (and others) chipset. This driver is not included in the kernel. I've previously posted to the general mail list: http://lists.centos.org/pipermail/centos/2007-February/075383.html I'm guessing this would go in the HardwareList section. Otherwise a page titled 'Realtek r1000 Driver' would work. my

Background, Client - realtek rtl8111c tftpd version is 5.0 options on use -l -v Client: PXE-EX32 TFTP Open Timeout Server: Jun 12 10:48:38 damar in.tftpd[30132]: RRQ from 192.168.1.107 filename gpxelinux.0 Jun 12 10:48:48 damar in.tftpd[30133]: RRQ from 192.168.1.107 filename gpxelinux.0 Jun 12 10:49:24 damar in.tftpd[30134]: RRQ from 192.168.1.107 filename gpxelinux.0 Jun 12 10:50:36 damar

Hello, We can see # lspci 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) I have used a custom kernel to start with centos 5.1 as an initial installation Our customer on this kernel has experienced slow pref on samba shares (50 seconds to open a file) So I have decided to updrade to centos 5.2 that have the right

Hello, I am bussy building a xen cluster. When selecting mainboards for this cluster i came only up with core 2 duo mainboards with onboard gigabit ethernet cards with the realtek RTL8111B chipset. I have tested a mainboard and could not find a way to compile the driver sourcecode from the realtek site because of a missing /lib/modules/2.6.16-xen/Build directory. Can anyone help me out? I am

Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process. I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message. ?Any help on how I can configure correctly this ethernet device? This are the data that I have: # lspci

Hi, I''m running FreeBSD 7.1-PRERELEASE with a 500-gig ZFS drive. Recently I''ve encountered a FreeBSD problem (PR kern/128083) and decided about updating the motherboard BIOS. It looked like the update went right but after that I was shocked to see my ZFS destroyed! Rolling the BIOS back did not help. Now it looks like that: # zpool status pool: tank state: UNAVAIL status:

What is the difference between these two fragments (taken from two different tblgen record dumps)? dag OutOperandList = (outs GPR:$rd); dag OutOperandList = (outs R2); The first is from the RISCV backend record dump. There will be a substitution at some point for $rd. In the second, I'm specifying R2, no substitution necessary. If I specify GPR64:R2 or i64:R2 in my Instruction def,

username: RiaanVanNiekerk What page detailing official vendor support statements for CentOS, actual/current, pending or requested. E.g. using as a base content available on http://blog.danieldk.org/post/2008/04/09/CentOS-vendor-support Where At http://wiki.centos.org/, under Additional Resources, a new page for Software (similar to HardwareList) What fix http://wiki.centos.org/FAQ/General ,

I am trying to transport a dd image between to hosts over a cross linked gigabit connection. Both hosts have an eth1 configured to a non routable ip addr on a shared network. No other devices exist on this link. When transferring via sftp I received a stall warning. Checking the logs I see this: dmesg | grep eth e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:f2:1f:bb