similar to: How verbose should NUT be by default?

Hello. I've tried to configure Windows (complete port, Beta): Windows MSI installer 2.6.0-1 with my Powerware 5115 connected via USB port but have no luck. Here is my config files: *nut.conf:* MODE = netserver *ups.conf:* [PW5115] driver = bcmxcp_usb port = notUsed desc = "PowerWare 5115" *upsd.conf:* LISTEN 192.168.1.12 3493 *upsd.users:* [monuser]

I have only RS-232 on the box (meanwhile, it was manufactured on march of 2011) Here is my configs: nut.conf: * * MODE = netserver ups.conf: * * [KIN1500] driver = powercom port = notUsed desc = "Powercom KING PRO KIN-1500AP RM" upsd.conf: * * LISTEN 192.168.1.2 3493 upsd.users: * * [monuser] password = xxxxxxxx upsmon master

Jim Klimov via Nut-upsuser <nut-upsuser at alioth-lists.debian.net> writes: > The opposite opinion is that programs should be quiet until asked to > squeak (e.g. by restarting with higher debug verbosity... "that would help > troubleshooting why the rack went down last week, right!" says the sysadmin > me). That's a fair summary but my opinion is: daemon-type

Jim Klimov via Nut-upsuser <nut-upsuser at alioth-lists.debian.net> writes: > The opposite opinion is that programs should be quiet until asked to > squeak (e.g. by restarting with higher debug verbosity... "that would help > troubleshooting why the rack went down last week, right!" says the sysadmin > me). That's a fair summary but my opinion is: daemon-type

Hi, this is my first nut installation, i see lot of connection failure and when i tried the configuration removing the power chord from the ups i expected tha machine will power itslef down but this has not happened. I'm using nut 2.2.2-2 from debian lenny, ups is a mustek powermust 2000 with usb cable. All config files are root:nut and 640, i've had to add nut user to nut group

I'm following up on a request from a pkgsrc user to improve the package, and that's leading me to thinking part of the issues are in nut, vs the package. Setting aside daemons that run as root vs not, there are two kinds of directories, using the BSD hier(7) scheme: /var/db/nut: - state files intended to persist across reboots /var/run/nut: - pidfiles - (probably)

I've not been able to connect to my ups using NUT 2.7.4 or NUT 2.8.0. 2.7.4 was installed as a package, 2.8.O was compiled from source. I've messed with permissons, everything is root:root and has the approprate read/execute permissons. I've tried two differnt UPS(es) APC & CyperPower. I'm running PI OS (Raspbian) on a Raspberry Pi3 model B. The port 3493 is open (UFW). I can

Yes, that was the power off test. However the upssched-cmd script gave absolutely no signs of activity. Even it's logger lines don't show up in journalctl. No any permission error messages - nothing. Only the 2 messages from upsmon - on battery and then on line power. Here is the nut-report: http://www.filehosting.org/file/details/518300/NUT.report --- George Anchev On Tue, Oct 27,

Hello, I have Mustek Powermust 2000VA USB And installed latest nut. Problem is that I cannot get info from UPS: http://pastebin.com/BtpE2Be1 I got contact with UPS via blazer_usb driver http://pastebin.com/38BZteFC Ups.conf: http://pastebin.com/KwRrz5rf Upsd.conf: http://pastebin.com/i3jNHpVj Upsd.users: http://pastebin.com/TRJ5ahWR Lsusb: http://pastebin.com/WsEbkPqG Dmesg:

Now I have this in /etc/nut/upsmon.conf (my QNAP NAS wants admin and 123456 or not working) RUN_AS_USER root MONITOR qnapups at localhost 1 admin 123456 master MONITOR qnapups at 192.168.222.252 3493 admin 123456 slave MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG /etc/killpower NOTIFYFLAG ONLINE SYSLOG+EXEC

On Fri, 12 Jul 2019, David White wrote: > Hello, thanks, and sorry for the delay in getting back. I am running the > script and have move the comment from one D= line to the other. I am, > however, seeing some errors written to the console. They are from line > 64-65 of the script. > > Regarding line 64, I have no /usr/sbin/ups* and suspect the proper > location on my

I've googled and RTFM'ed, but still can't solve this one. I hope you folks can. This affects my entire computer cluster, but let's start simple: I've got a computer running NUT; OS is Scientific Linux 5.5; kernel 2.6.18-274.12.1.el5xen. It connects to an APC SMART-UPS via an APC SmartCard using the snmp-ups driver. It generally works: upsmon will detect if the battery is low

Dear all, I am using the Microsoft Windows XP SP3 and would like to use the Windows MSI installer 2.6.1-1 I tried to configure NUT manually, but until now failed. If possible I would like to use the PowerWalker Line-Interactive VI 1400 device which should work with blazer_usb Does anyone have possibility to provide me the correct configuration for the files (ups.conf, upsd.{users,conf} and

Hello, I'm using Archlinux x86_64 with linux-nouveau kernel (based on linux-mainline (that is linux-3.6)). I've installed nut-2.6.5. I first tried to use new systemctl .service scripts, but they are problematic. So I start and stop nut from /etc/rc.c script. This way, it "woks". Here are my config files : nut.conf : MODE=netserver ups.conf : [ellipse] driver = usbhid-ups

Hi to all, i install nut and it's work perfectly but when i start upsmon i recive the message: POWERDOWNFLAG (/etc/killpower) does not contain the upsmon magic string My upmon.conf contain: MONITOR myups@theseo 1 orion91 carlos81 master SHUTDOWNCMD "/sbin/shutdown -h +0" HOSTSYNC 15 POWERDOWNFLAG /etc/killpower FINALDELAY 5 My killpower scrit in /etc/killpower

Hi centos 6.3 uses traditional SysV script ( not systemctl) here is the /etc/init.d/ups ( script) assuming it similar to nutshutdown # more /etc/init.d/ups #! /bin/bash # # ups: Starts the Network UPS Tools # # chkconfig: - 26 74 # description: Network UPS Tools is a collection of programs which provide a common \ # interface for monitoring and administering UPS hardware. # processname: upsd #

Hello all, I'm having problems with what I'm told should be a straightforward issue. The message in /var/log/daemon is: <quote> Feb 13 10:37:57 lupin upsmon[31324]: Master privileges unavailable on UPS [lupin1500AVR@localhost]

Hello, I encounter a problem using the UPS MGE Evolution 850 VA USB with Debian Etch and the nut package available for this version. I got this error: ==syslog== Can't connect to UPS [MGE850VA] (usbhid-ups-auto): No such file or directory upsd[2767]: Startup successful upsmon[2769]: Startup successful upsd[2767]: Connection from 127.0.0.1 upsd[2767]: Client MGE at 127.0.0.1 logged

Hello, I have been following the details in this article to configure my UPS: http://rogerprice.org/NUT.html However the system won't shutdown although file permissions look ok: ls -alF /usr/sbin/ups* -rwxr--r-- 1 upsd daemon 64984 Oct 15 2014 /usr/sbin/upsd* -rwxr--r-- 1 upsd daemon 48584 Oct 15 2014 /usr/sbin/upsmon* -rwxr--r-- 1 upsd daemon 31536 Oct 15 2014 /usr/sbin/upssched*