similar to: 69.x.x.x network in rfc1918

Hi All, I''m a big user of the LARTC document but am currently stuck with a question around section 4.2 (http://lartc.org/howto/lartc.rpdb.multiple-links.html) in relation to "Routing for multiple uplinks/providers". I''m wanting to do a similar setup to the diagram where I have - lets just say for the moment - two uplink providers where I want to route over two

What can I do to UNDERSTAND why, periodically, I can't reach www.centos.org (but everyone else can)? Every few months, http://www.centos.org just drops off for me and for me only. It's not the web site, because I can reach it via a proxy (e.g., TOR browser bundle) and other tests show it to be alive (e.g., http://www.downforeveryoneorjustme.com/centos.org or

The web site for CentOS is not responding. I can ping it OK, but the web site is not responding to http requests from my browser. If the webmaster should happen to read this...

How do I allow traceroute to reach my server? Pings work fine but traceroute stops at the last hop before my server. If I shut off the firewall it reaches it fine. PING danicar.net (24.222.246.120): 56 data bytes 64 bytes from 24.222.246.120: icmp_seq=0 ttl=237 time=104.0 ms 64 bytes from 24.222.246.120: icmp_seq=1 ttl=237 time=74.9 ms 64 bytes from 24.222.246.120: icmp_seq=2 ttl=237 time=90.6

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 To reflect recent allocations by the IANA, the following files are available: For Shorewall 2.0.0b and earlier: http://shorewall.net/pub/shorewall/errata/1.4.10/rfc1918 ftp://shorewall.net/pub/shorewall/errata/1.4.10/rfc1918 For Shorewall 2.0.1 and later: http://shorewall.net/pub/shorewall/errata/2.0.10/bogons

Updated rfc1918 and bogons files are now available: rfc1918 for Shorewall 2.0.0 and earlier: http://shorewall.net/pub/shorewall/errata/1.4.10/rfc1918 bogons for Shorwall 2.0.1: http://shorewall.net/pub/shorewall/errata/2.0.1/bogons Thanks go to Thomas Backlund for pointing out that the file was out of date. -Tom -- Tom Eastep \ Nothing is foolproof to a sufficiently talented fool

A new rfc1918 file that reflects the recent IANA allocation of 222/8 and 223/8 may be found at: http://www.shorwall.net/pub/shorewall/errata/1.3.14/rfc1918 ftp://ftp.shorewall.net/pub/shorewall/errata/1.3.14/rfc1918 -Tom -- Tom Eastep \ Shorewall - iptables made easy Shoreline, \ http://www.shorewall.net Washington USA \ teastep@shorewall.net

Is my RFC1918 file obsolete? I have been assigned an ip in the 83.0.0.0/8 range, and of cource a lot of Shorewall systems drop me with a RFC1918 error. So, is my ISP actually giving me a RFC1918 IP, or am I missing something? .

I don't know if this is the right place, but it is a place to start. I have two machines in a co-location facility. They are both on the same physical network segement and have real internet addresses and RFC1918 addresses. We get charged for traffic which goes across the "real" internet addresses which is part of the purpose for the RFC1918 network. The problem is connecting

Hi I''ve come accross a small problem with the rcf1918 address blocking on my internet interface. Im connected via a cable modem and it has an internel web server that allows me to configure/monitor it but as expected if I enable rfc1918 blocking for my eth0 interface(The internet one) it also blocks the cable modems web server. Is there any way it can add a rule before the rfc1918

In my peculiar setup I need my shorewall router to do one-to-one NAT with RFC1918 addresses. The "external" addresses are 10.215.0.0 and the internal addresses are 192.168.0.0. I can ping, vnc, http, smb from 10.215.144.48 to 10.215.145.237 which is 192.168.44.237 internally. >From 192.168.44.237 I can do http, rdp, ping to 10.215.0.0 hosts. So all seems fine except for the fact

>> Only one remark. Information about 'init' file i found only in >> releasenotes.txt for 4.1.6 (for setting up 'ifb' module) and i found >> 'initdone' file in Shorewall config directory and without manfile also. >> For me not very clearly as it use. > > http://www.shorewall.net/shorewall_extension_scripts.htm On this page i found a

Dear R-helpers, I'd like to understand how to test the statistical significance of a random effect in gamm. I am using gamm because I want to test a model with an AR(1) error structure, and it is my understanding neither gam nor gamm4 will do the latter. The data set includes nine short interrupted time series (single case designs in education, sometimes called N-of-1 trials in medicine)

Morning All, I have a boolean value called: countyid with the i.d. of XL Is it possible to give a unique entry two values so if I search for XL1 or XL2 this unique entry is shown in both queries? Cheers John

current setup SIP phone 192.168.1.30 --> linksys wrt54g sveasoft -- INTERNET -- (xl0) Firewall (xl2:172.16.0.50)--> (em1:172.16.0.101) Asterisk problem is RTP stream not oging trouhg from * to sip and vice versa. #1 and asterusk is pushing 192.168.1.30 back to linksys with 172 as return address.... or #2 asterisk trying to get back to me as 192.168 on public internet.. got

I have several computers connected to the internet through a DSL router that assigns rfc1918 (192.168.1.x) addresses to the systems connected. I have a server where shorewall is installed with one interface eth0, with a static ip (192.168.1.3). The router is configured to forward all connections from the internet to the linux server. I''d like to know how I can configure shorewall to

Every time I download and try to install through crossover games, I get this same error, I made sure to use winetricks to download ie6, vcrun2005, and wininet. The error is "the program clientupdate.exe has encountered a serious problem and needs to close. We are sorry for the inconvienence". Does anyone have experience getting this to run through just wine, or crossover games? is

Please, help me. Can i forbid and how any outgoing traffic (ping,trace) to rfc1918 networks on my external interfaces? Thank you very much. Aleksandr -------------------- Продукция AcmePower - это зарядные устройства, аккумуляторы формата АА и ААА, сетевые адаптеры, аккумуляторные батареи для фото и видеокамер, ноутбуков и PDA. Гарантия минского сервисного центра.

Hello all, I''m using shorewall on a linux machine that has two interfaces, eth0 being connected on the internal network (10.10.10.0/24) and eth1 being connected to the external network. On eth0 the IP is statically configured to 10.10.10.254 and there is a dhcp server running for the machines in the private network. On eth1, the IP is dynamically assigned by my ISP modem that acts as

I am having problems in the implementation of a VPN, below made a project of my net: INTRANET (10.0.0.0/24) | 10.0.0.5 xl0 NetBSD IPNAT ( map wi0 10.0.0.0/24 -> 192.168.213.10 ) wi0 192.168.213.10/30 | | Wireless VPN | | 192.168.213.9/30 xl2 FreeBSD NATD ( divert natd all from any to any ) xl0 200.x.x.5/24 | 200.x.x.1/24