similar to: Shorewall sending PASV FTP

Hi, We have 2 offices interconnected with a VPN. This is the policy file in both of the Firewalls: fw loc ACCEPT loc fw ACCEPT #fw net DROP info fw net ACCEPT loc net DROP info loc vpn ACCEPT vpn loc

Hey list, Sorry for all the questions today. But I am trying to wrap up this ftp business and still having some issues. I appreciate your input. SELinux is temporarily disabled (until I can work this all out) and I am now able to log into the FTP server. [root at LCENT05:~] #/usr/bin/ftp localhost Connected to localhost (127.0.0.1). 220 FTP Server ready. Name (localhost:root): bluethundr

Hi, I have a cisco sdsl modem to connect to internet via eth1 (192.168.1.2) local is eth0 (192.168.2.254) default gw is 192.168.1.1 the cisco forwards all incoming ports to 192.168.1.2. I connect from outside on port 24562, login is successfull, the ftpserver gives back the external Ip of the cisco as pasv IP to the client (its a setting in the ftpserver). It gives an ip from the pasv range I

I said: > # MSS CLAMPING > # Your kernel must have CONFIG_IP_NF_TARGET_TCPMSS set. > > I''ve activated the option, but to no result watsoever. > Checked my kernel config, and it states that CONFIG_IP_NF_TARGET_TCPMSS is a > loadable module, that should be loaded on demand. > Simon said: > Did you try adding it to /etc/shorewall/modules ? Actually, no I

I apologize for the first message. :) --------------------------------------- I have an FTP server running in the DMZ section of my home network. It uses port 23000 for connection and ports 19990 to 19994 for data transfer. I have setup the following rule for outside people to connect to it: DNAT net dmz:192.168.2.2 tcp 23000 I''m at work right now and I can''t use

Hi, ok Im all new to this :-) for pasv ftp in your example you say for example to use ports 65500-65535, but i dont see that u open those ports in your example fw scripts..? any hints ? -- Christophe Zwecker mail: doc@zwecker.de Hamburg, Germany fon: +49 179 3994867 http://www.zwecker.de "Who is General Failure ? And why is he reading my disk

Hello, I have a local network with gateway (192.168.1.1) to internet, it is computer with slackware and shorewall. I have ftp serwer on my gateway computer, serwer is on 21 port and it is accesable for external and internal computers ( from internet and local network ). Today I have installed Serwer on my local machine (192.168.1.6) on port 22019. The serwer is accesable from loal computers in

Hello list! Well I have delved back into my proftpd config in the hopes of resolving my issues and having a working server. :) I believe I have the passive mode issue that I was expereriencing last time mostly worked out. But there are still a couple of things going on with this config that I was hoping to run by you in hopes of finding a solution. If I execute an ftp session on localhost

Hello, I run Shorewall 2.0.3a backport on a debian woody box (with 2.4.18 homemade kernel). When I start shorewall I got the following errors. Oct 30 11:13:12 fwr modprobe: modprobe: Can''t locate module ipt_conntrack Oct 30 11:13:17 fwr modprobe: modprobe: Can''t locate module ipt_pkttype Oct 30 11:13:18 fwr modprobe: modprobe: Can''t locate module ipt_pkttype Oct 30

Hi, on a system RedHat 8.0, only on this, not on other various RedHat8.0, I have see the follow strange error in /var/log/{messages,boot.log} ..... After the boot all it seems to work, the modules is loads.... I have already tried to install other versions of kernel but the problem is always the same one :-(( Someone has some idea of what is happening? Thanks... Dario Lesca

I am looking for help in writing the scripts for numeric paging via Asterisk. Here's the general flow: answer lookup D-I-D if "on" prompt with "please enter your telephone number" store in variable prompt "please hangup now" Shell to SNPP executable and send message to server. I have the code in "C" for the command line SNPP client. Three parameters

Hi all, I was trying to test ROUTE specific code with a multi-isp serviced box. There is a bug somewhere, but I''m not able to understand what the real problem is: when I issue a "shorewall show capabilities" I get: Loading /usr/share/shorewall/functions... Processing /etc/shorewall/params ... Processing /etc/shorewall/shorewall.conf... Loading Modules... Shorewall has

Hi, I''m trying to enable ssh (when that works, want to add:pop3s,smtp,web) from the internet to the firewall but it does not work. I managed to DNAT ftp to a host in the loc network (192.168.0.50) successful but I don''t know why SSH: Does not work for me: ACCEPT net fw tcp 22 Works from the loc network: ACCEPT loc fw tcp 22 I have tried also with (no success): AllowSSH

I am using the madwifi driver with the patch to allow changing of the MAC address and I have two other ethernet interfaces plus a pppoe interface. My outbound connection is ppp0. I have ath0, eth1, eth2 for internal interfaces. I have added these three interfaces to br0. Once the traffic leaves the linux router, it gets NAT'd and goes out through ppp0. All traffic on all segments works

I have a vsftp server hosted on custom dyndns site. We have a 4mb ADSL connection. When I tried to download the files from the ftp server with wan IP address or the dyndns address it downloads some files and disconnects. Please find below an extract from the log file (ace ftp client). I would appreciate if someone could guide me, possibly with a solution for this problem. Many thanks

Okay here is my setup: Gentoo Box running 2.6.4 w/ 4 NICs 1 NIC is for internal network 3 NICs are for external network The machine has a static address assigned to the internal network nic. This nic runs dhcp and dns forwarding. The other 3 nics have external dynamic IP addresses. All will have the same gateway. There are 3 NICs because this is a very large pipe, that will only allocate a

Hi! Already searched for it and asked in IRC channel but all replies talk about ip_conntrack_irc and ip_nat_irc. I have a rule in 'NEW' section of 'shorewall/rules' to irc: ACCEPT fw net tcp 6667 #IRC and 'lsmod|grep irc' shows: ip_nat_irc 3648 0 ip_nat 22572 8 [...] ip_conntrack_irc

I''m trying to setup Shorewall 2.0.8 with the one-interface settings on my LFS (kernel 2.6.5) system. I''ve read the troubleshooting guide, recompiled my kernel with just about every netfilter/iptables module I could find, but I''m still getting this error: # tail /tmp/trace + prefix=Shorewall:smurfs:DROP: + ''['' 22 -gt 29 '']'' +

mdew:~# tc qdisc add dev imq0 handle 1: root htb default 12 r2q 1 Cannot find device "imq0" mdew:~# lsmod Module Size Used by Not tainted ipt_REDIRECT 728 0 (autoclean) ipt_MARK 728 2 (autoclean) iptable_mangle 2100 1 (autoclean) ipt_REJECT 2712 4 (autoclean) iptable_filter 1672 1 (autoclean)

Have you checked the file rights under your document root ? Your apache group need reading right. Am 07.05.2015 21:42 schrieb "John" <tuxfed at gmail.com>: > Hi all, Freshly installed apache 2.2 with httpd-itk (from epel). When I > try to access apache's document root from a browser on local network, it > always serve me the Apache welcome page, even if I have a