similar to: (no subject)

Sorry to barge in on an old thread. I''m having the same trouble as the gent who started this thread. I''ve tried the options described and can''t seem to get the tunnel to pass packets through it. I''m using the Netscreen Remote VPN client (Safenet derivative) on a windows machine, trying to connect to a Netscreen 5xp at the other end. The connection fires

Hi all, I have set up a working OpenVPN2 connection between my Server and my gateway at home. Now I want all traffic to be routed through this VPN connection. Currently everything is going through eth1 to the internet (to the gateway of the University which forwards it to the internet :-). We must use a prox-server and because of this I am not abel to watch the real-Media streams on

Hi there, I would need some help with my configuration. I have tried a long time, but did not find my error. Thus I would really appreciate your help. There are three hosts: 1. h181 2. h182: Should ConnectTo h181 3. h183: Should ConnectTo h181 *Files under /etc/tinc/vpn0/hosts* [h181:] Address = 94.130.108.xxx Subnet = 172.16.1.1/32 -----BEGIN RSA PUBLIC KEY----- *** -----END RSA PUBLIC

Hi everybody. One month ago me migrated from samba 3.6 classic domain to samba4. After solving some minor problems, we have found ourselves with a ACL corruption and we don't know how to deal with this. When accesing to our sysvol shared (for example, \\domain.local\sysvol) from both Samba or Windows clients, we are refused to connect. Domain=[VECTORSF] OS=[Unix] Server=[Samba 4.1.4]

[This email is either empty or too large to be displayed at this time]

Here is the scenario: I have one server with kernel 2.4.24 with a bridge br0 made of 2 interfaces, eth0 and tap0 (the last is an OpenVPN tunnel), and one remote computer connetting through tap0. If I assign a static IP to the remote computer, the bridge works perfecly (so I think the problem is not OpenVPN-related). If I start a DHCPd on the server and I configure the remote client to get the

Hi, I have a few questions about the inner workings of netfilter (a graphical layout of my network setup @ https://aequorin.homeunix.net:62389/local/media/network-graph.png) 1) These are the syslog entries for some simple connection tests. Shorewall/netfilter has been set to record all stateful connections SSH is recognized as phys(eth0) -> $FW traffic. This is because PHYSIN is

Hello list, Please don''t shoot me. I know I''m doing something with bonding that bonding wasn''t made for. I just want to give it a try. I want a simple mechanism to have a failover on a 24Mbit line to a 2Mbit line in case the 24Mbit line goes down. Between A and B there are two lines: a 24Mbit and a 2Mbit. I use two OpenVPN tunnels with tap devices: +-- tap0 (A)---

inquiry about differences between the tap and the vnet in the virt-manager Greetings! I encounter a problem about the network when using virt-manager to create and run a VM. when I want to establish a network bridge for the guest OS, I generally use two kinds of ways described as fellow : First method : create a bridge with the help of linux commad: brctl, or Second method : using

Hello, I have the need to connect 2 remote site with vpn, the windows pc of the 2 site it can share the HD and printer. This is my configuration : LOCAL NETWORK A : ip from 192.168.10.2 to 192.168.10.99 | | | | eth0: 192.168.10.1 FIREWALL A : ( with debian ; openvpn ver. 2.0.beta15 ; shorewall ver 2.0.11 ) eth1 : xxx.xxx.xxx.xxx ( pubblic ip address ) | | | | INTERNET | | | eth1 :

Hello, I have been using the bridging facilities provided by Linux (vanilla 2.6.7 SMP with UML skas host patch applied) to bridge a regular physical ethernet network (on interface eth0) with a virtual network (on interface tap0, cf uml_switch, http://user-mode-linux.sourceforge.net/networking.html). A couple of virtual machines (run using user-mode linux, a tool that enables you to run linux

I have a Debian 8 64-bit machine set up as a server and apt-got the tinc package. I configured tinc as a bridge and everything seems normal except that the tunnel does not forward multicast traffic. I used tcpdump to examine the br0, eth0 and tap interfaces. I could see multicast packets on both br0 and eth0, but there is no such packet present on the tap interface. I don't quite know why

Hello all, I subscribed newly to this list, since I got an bridging problem after an upgrade from Debian etch to Debian lenny (before everything worked fine). The situation is as follows: # brctl show bridge name bridge id STP enabled interfaces br0 8000.000347729835 no eth0 tap0 tap0

No i can start qemu but no network I have a bridge br0 with ta0 on it My start line qemu debian.5-0.x86.20100901.qcow --curses -net nic -net tap,ifname=tap0,script=no

Hi all. I would need to use a single physical interface on a Linux box to manage two different IP addresses (belonging to two separate logical subnets) with two different MAC address. (I need to emulate te presence of two separate physical interfaceses for a PC on the same LAN, at layer 2 and layer 3). Is it possible to use the linux ethernet bridging code and two tap interfaces for this

Good day, I have gone through a couple of the HOWTO''s on how to get this to work, but I am still sitting with a very strange (for me) issue. If two clients connect via OpenVPN (bridged), they can access each other without any problems, but neither of them can access the server, nor any system behind it. I am fairly sure it is a Shorewall issue, but I am very new to Shorewall, having

Hey all, I''m trying to setup roadwarrior connection to my internal network. So I''ve setup openvpn to create a tap0 connection and also have bridged the eth1 (leads to my internal computers 192.168.2.10-30 and tap0 which is the VPN connection. On my shorewall setup I have br0 maped to zone loc and eth0 to be my internet and I have masqing on my br0 to get my internal computers

Hello, I thinking about using PCI passthrough to dedicated a domU as firewall. I understand PCI passthrough concept. When done, my domU will see network card and the dom0 won''t any more. So I''ll be able to filter all trafic from outside, since it will go through network domU. Then, how will I be able to connect other domU (and maybe dom0) to the network domU ? In a normal way,

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I''m running Shorewall 4.4.0/Debian Lenny and I''m trying to setup OpenVPN with a mild degree of success so far. My ultimate end goal is to basically have an extension of my home lan to my laptop as well as my wife''s when we are away from home, and have all of my normal network resources available as if I were sitting at home

How does the libvirt deal with the vnet mac address? Greetings, if I establish a network for the VM (hypervisor is KVM) using bridge in the virt-manager , a vnet0 device is created . There are some relationships about mac address between the vnet0 device in the hypervisor and the ethX device in the VM, for example : the mac address of vnet0 is FE:54:00:84:E3:62 the mac address of ethX in the VM