similar to: Wireless question...

Hi All, After hours of reading and trials, I got the following setup working... 1. Dell Axim X30 PocketPC with 802.11b wireless using DHCP with Open WEP -- successfully connected to --> 2. Laptop with DLink Airplus DWL-650+ PCMCIA wireless with ndiswrapper v1.1 driver with network bridge (wired + wireless) and running a DHCP server listening on interface br0 (eth0 + wlan0) Here is the

I am having problem in ping or connect AP from Mobile Node(essid & channel is the same,maybe routing did not set properly but i fail to configure with route add default gw 192.168.3.4,its alway said network is unreachable ),My Mobile Node is using acx100 as driver while AP(redhat 9.0) is using HOSTAP 0.1.3.Any one can help? I heard How-To said we not need to set address on eth0 & wlan0

I just installed an Asus PCE-n13 wireless card into one of my CentOS 5.6 systems. It uses the RaLink 2680 chip set and I was able to get the driver loaded using modprobe rt2x00pci.ko. I saw no error and now see that the module is loaded along with mac80211 and other dependencies. Now I need to know how to create the wlan0 device. I can find nothing via Google searches on how to create that

Hi all, I'm trying to configure wireless on my Asus laptop running CentOS7. I see wlan0 when I type iw dev, but if I type ip link set wlan0 up I get the following error: RTNETLINK answers: Operation not possible due to RF-kill Any idea what is wrong?? Adrian -- Adri P. van Bloois Antonlaan 104 email: adrian at pa0rda.nl 3701 VG Zeist voice: +31-(0)-30-6912741 The Netherlands fax:

I have a dial plan that includes a company phone directory as a main menu option. If they just sit at the main menu, after 20 seconds, they are transferred to the operator. If the user picks an extension from the directory, they are transferred to the proper extension. If the called number is not available, they are transferred into VoiceMailMain. They leave a message, and hang up. The hang

Hello, Ever since I started using Asterisk I always get this error: Jan 10 15:39:26 NOTICE[4501]: res_musiconhold.c:463 monmp3thread: Request to schedule in the past?!?! I have a dedicated system system that really runs only Asterisk: - Pentium III 500Mhz - 128MB of RAM - 10GB of Disk Space - SuSE v9.2 - MySQL - Apache (only for use with Asterisk) - NTP client for clock synch There is no X

Hello, I am using wireless N on a DLink-655 wireless router. It is the "A" hardware version with the latest firmware. I am using a channel that no one in my vicinity is using, according to iwlist. I checked the Statistics from the router web interface and they are shown below for a period of less than an hour. It looks like the errors are excessive, especially the "RX Packets

I am using R-2.10.1 binary from CRAN on a WinXP Pro system. I also use SAS v9.2 on the same box. I just started using the SAS ODBC driver that comes with version 9 of SAS. I have been able to set up an ODBC source for SAS datasets using the driver, and then with RODBC I am able to read a sample SAS dataset. > library(RODBC) > ch <- odbcConnect('sasodbc', believeNRows=FALSE)

Hi all, I am trying to configure wlan0 interface to use it with kvm guests. I know that I need to use ebtables statements due to it is not possible to link wlan0 interface with a bridge. I have followed Debian's tutorial: https://wiki.debian.org/BridgeNetworkConnections#Bridging_with_a_wireless_NIC without luck. Someone have tried?? I am using CentOS 7 fully patched. Thanks.

Hi, I have a wireless network but no wired network. I need to access the net for the necessary installation of the wireless drivers in CentOS 5.1. Could anyone let me know how i can go about it!! My card is Intel PRO/Wireless 3945 -------------- next part -------------- An HTML attachment was scrubbed... URL:

The REV I card shows up in the PCI table as: 02:05.0 Network controller: Tiger Jet Network Inc. Intel 537 (or 02:05.0 Class 0280: e159:0001) Subsystem: Unknown device b119:0001 But the REV E/F shows up as: 02:0d.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface (or 02:0d.0 Class 0780: e159:0001) Subsystem: Unknown device b100:0003 One

I have a system that does *not* have a graphical desktop installed, nor do I ever plan to. I have its wired ethernet working just peachy. Now I want to configure a USB wireless ethernet and scratching my head. Particularly since I don't use NetworkManager, everything is manually configured. That said, if I enable NM, I see this in /var/log/messages: NetworkManager[26900]: <info>

Hi everyone! :-) Yesterday I managed to find a driver for my USB wireless dongle, and it is now correctly recognized by the kernel. However, I don't know how to configure it. The system-config-network opens up in text mode and is not very forthcoming (it lists ethernet, ISDN and modem as possibilities for configuring a new device). I don't know how to create an

I am trying to get to the bottom of audio clicks, pops, dropouts with my Asterisk server. These occur even when the system is under minimal load (e.g. 1 Zap device in a queue being played music on hold) and occurs with both Zap and Sip devices so isn't network related. The audio problems occur at the same time on all channels and seems to be when Asterisk "gets busy" and uses

Hi, I have a dlink dvg-1120M (mgcp) box that i will like to use with asterisk. Is it possible? has anyone done that? Here's a link to the product page at dlink. http://support.dlink.com/products/view.asp?productid=DVG%2D1120M Also, does anyone has or know where to get the firmware for Dlink DVG-1120S (sip model)? thanks. -- Zahid

I'm having a wireless connection issue with an HP laptop and a Zotac media server after the 6.4 package updates from CR repository. Nothing changed with wireless config as far as I can tell. Both have been working fine with previous releases of 6.x. Oddly, if a cat 5 cable is connected for a few seconds and then disconnected the wireless works fine and survives a 'service network

On Tue, Apr 1, 2014 at 1:23 PM, Ivan A. Kosarev <ivan at ivan-labs.com> wrote: > Hi Alexey, > > > On 03/31/2014 09:58 PM, Alexey Samsonov wrote: > > On FreeBSD 9.2 I add a couple custom options to CMAKE_CXX_FLAGS in order > to let clang know which header set it should use, like that: > >> >>> CC=clang CXX=clang++ cmake \ >>>

So I have whose autoattendant is colliding with their extensions... Quick fix anyone? Second someone presses say a person's extension (101) ... Autoattendant sends them to the first context... [companyx-main-aa] exten => s,1,Background(companyx/companyx-main) exten => s,2,Background(silence/10) exten => s,3,Background(companyx/companyx-main) exten => s,4,Background(silence/10)

Hi all, I'm trying out bridging for my wireless and wired LAN, so that they can both use my PPPoE connection. Here's the network structure, pretty easy: darjeeling (192.168.1.7) ringo (192.168.1.3) (mtu 1500) (mtu 1500) \ / \ wlan0 <--br0 (mtu 1500)--> eth1

It looks like I've gotten the majority of things working in regards to Winbind. Users are being authenticated by the NT4 PDC when connecting to shares, but I can't seem to get things set up correctly to allow logging in via SSH(OpenSSH_3.6.1p2, SSH protocols 1.5/2.0, OpenSSL 0x0090702f). It appears as though I'm successfully authenticated by the PDC, but then the connection is