similar to: Installing centos in a Compaq ML350 G5

Hi list! I tried to install Xen 4 in a HP Proliant ML350 G4p, but it seems not compatible, is there another way to run Xen 4 in this server ? I couldn''t find any information on Hp''s site neither Intel''s site ... Thanks ! -- @ntonio _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

> Hi All, > > My PXE configurations works fine for a bios PXE (the server in legacy > mode) but hangs in an EUFI mode. Look like it can transfer the bootx64.efi > but not the next one ldlinux.e64 > > > Any ideas? > > Thanks > Latest updates (including firmware) for the HP ML350 Gen9 were released on 2014DEC19 (v1.21); I would suggest double-checking

Hi All, My PXE configurations works fine for a bios PXE (the server in legacy mode) but hangs in an EUFI mode. Look like it can transfer the bootx64.efi but not the next one ldlinux.e64 Any ideas? Thanks Software> syslinux ver 6.3 atftp 7.1 Log server side >> Booting Embedded LOM 1 Port 1 : HP Ethernet 1Gb 4-port 331i Adapter - NIC (PXE IPv4) >> Booting PXE over

Hello lists, I,ve compaq ML350 with 2 Xeon 2.4 GHZ and FreeBSD 5.0 RELEASE installed and working very fine about 4 mounts. The machine running GENERIC kernel samba and firebird database server with no problems until at begining of this week, in morning machine freezes with no responce iven in conconsole, no responce from network (pinging) no responce on console (key pressing) the only way to get

On Thu, Mar 5, 2015 at 2:03 PM, Jorge Cisneros via Syslinux <syslinux at zytor.com> wrote: > Hi All, > > My PXE configurations works fine for a bios PXE (the server in legacy > mode) but hangs in an EUFI mode. Look like it can transfer the bootx64.efi > but not the next one ldlinux.e64 > > > Any ideas? My latest personally-published binaries.

Hi, I have been trying to install CentOS 5.1, 5.2,and 5.3 and the HP server but to no success. It starts loading well the on trying to load the cciss driver, the machine hangs there and refuses to move on. Any help will help quite alot. Thanks

Hello I do have problem using Linux with an external HP tape drive. The server platform is also an HP Server; the server is an HP ML350 G4, and the Tape drive is a HP Storage Works Ultrium 448 - 1U Rack-mountable. HP Ultrium documentation says two drivers should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about

Hi, we''ll start virtualization with Xen in our company and we''re looking for the right distribution. The most important Servers in DomUs are working with a MS OS (Win2000/2003/2008). I''ve read something about to accelerate Windows with paravirtual drivers in some distributions. Other distributions have specific tools to install and support DomUs. And now I''m

hi guys, after installing centos on my ml350 i found 2 choices on the grub options. CENTOS-4 i386 (2.6.9-22.ELsmp) CENTOS-4 i386-up (2.6.9-22.EL) what choice will i choose ? --------------------------------- Yahoo! Autos. Looking for a sweet ride? Get pricing, reviews, & more on new and used cars. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All, I have recently installed CentOS 6.3 with QEMU+KVM for Virtualization. I have successfully created a Windows 2003 VM with 4GB of RAM. The host server is an HP ML350 G8 with 24GB RAM and 24 cores. Details of one of the cores is shown below: processor : 23 vendor_id : GenuineIntel cpu family : 6 model : 45 model name : Intel(R) Xeon(R) CPU E5-2620 0 @

Hi I'm having problems getting the TE420 working in HP DL380G5 servers. The cards don't seem to be detected 100% by the BIOS. With two cards in the server they are never detected. things I've tried: 1 Update firmware to latest (P56) for the server 2 change irq settings 3 disable all onboard devices on server and remove raid controller 4 different cards in different slots What I

Hi to all, I am in the process of setup a new asterisk server, I think in the HP Proliant ML350 G6 Server (aprox. 100 SIP Users), and Sangoma A102DE Card. The specs of the Proliant (HP PART 487932-001) about PCI are the next. 1 ( 1 ) x PCI Express 2.0 x16 ( x8 mode ) , 1 ( 1 ) x PCI Express 2.0 x8 ( x8 mode ) , 4 ( 3 ) x PCI Express 2.0 x8 ( x4 mode ) The question is, if

Hello List, The main issue is server selection regarding PCI bus connectivity for Asterisk solutions. Most offerings on HP Proliants, something I've been looking into, include PCI-X and/or PCI-e expansion slots. I know PCI-e is totally different from PCI and PCI-X so, for now, that's not an issue. However, regarding PCI and PCI-X, and after googling for a while and checking wikipedia

Hi there, I have experienced problems on HP Elitebook 2560p and 8460p latest firmware installed: 2560p 68SSU ver. F50. 08/04/2014 8460p 68SCF ver. F50. 08/04/2014 PXE boot, syslinux.efi gets perfectly TFTP transferred, it nevers asks for ldlinux.e64, and immediately gives up. I have traced the problem to: /syslinux-6.03/efi/udp.c\core_udp_open()

Hi, i'm Emiliano this is my first mail to samba mailing list. I have to solve this issue for a company. They need to had a folder, shared over CIFS for windows/mac clients, that is always available, also if the server who host it hang up or burn. I've looked for a lot of solution but i cannot find the right for me. Actually the company has two server, all running debian lenny as linux

hw wrote: > m.roth at 5-cent.us wrote: >> hw wrote: >>> Richard Zimmerman wrote: >>>> DO NOT buy the newer HPE DL20 gen9 or ML10 gen9 servers then >>>> (especially >>>> if using CentOS 6.x) >>> <snip> >> And I do *not* want to buy from HP, because their >> support is nothing like good. > > Indeed, I wouldn?t buy

I've seen this consistently on three systems, with three different cards, and multiple versions of DAHDI. At first I thought the issue only occurred on newer, Nehalem-based, systems, but I reproduced it on a Core 2 Duo box as well. I've tested with dahdi-linux 2.2.0.2, dadhi- linux-complete 2.0.0+2.0.0, 2.1.0.2+2.1.0.2, and 2.2.0.2+2.2.0. The card is a Digium TE220B which uses the

Are they any issues still with hyperthreading processors, I've read and been told by a few people to make sure its disabled in bios if I want to use * on a hyperthreading machine. Kind Regards, Chris Bond

Hello All, Has anyone tried using a HP DL360 G5 with the Advanced iSCSI license? Cheers Tim _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello. Recently I've ran into problems with HP Proliant booting off the network with menu.c32. Configuration -- several identical servers: HP Proliant DL360 G5 HP Bios P58 12/26/2006 Bootblock 09/18/2006 HP SmartArray E200i Controller (128MB, v1.20) Broadcom NetXtreme II Ethernet Boot Agent v2.8.5 When localboot is chosen from menu.c32 menu I get standard "PXE-M0F Exiting ...",