similar to: problem with a router machine

Hi, I have multiple ppp interfaces that does not correspond to the same network usage. Do you know anything about trying to set definitively the ppp+ name ? or anything to adapt automagically iptables to the real network which is behind each ppp+ interface ? I''ve tooken a look into the IFNAME env var... but it doesn''t seems to work :c/ regards, -- BeTa

Hi, i connect to the internet over my eth4 interface using pppoe. The internet always comes on ppp0. I am trying to setup an L2TP/IPSEC VPN and i am reading http://www.shorewall.net/IPSEC-2.6.html#RW-L2TP I notice in the example the interfaces file is given as: #ZONE INTERFACE BROADCAST OPTIONS net eth0 detect routefilter loc eth1

I am trying shorewall as my previous post With alisias on eth1 loc and 4 pptp client vpns. The odd thing is when I enter one of the vpns in interfaces such as vpn1 it works. But if I enter the vpn in the hosts file shorewall blocks the vpns. shorewall/hosts #ZONE HOST(S) OPTIONS loc eth1:192.168.25.0/24 loctw eth1:192.168.50.0/24 locsa eth1:192.168.75.0/24 vpntw

Hi I am looking at converting a Linux terminal server box to iptables using Shorewall 2.0. (At the moment it uses ipchains). The server currently has scripts which are called as each user logs in which run a series of "ipchains" commands to set the access rights for that user (and again to cancel them when the user logs out). My plan is to replace these scripts with ones that call

i''ve read your http://lartc.org/howto/lartc.rpdb.multiple-links.html article as well as Advanced IP Routing (esp. chapter 10.4) and still unable to make this thing work. am i that helpless? :) is there anyone to guide me through the multiple ISP setup? into details. i got 2 dsl connections from different ISPs (A and B), both connections use PPPoE, both got assigned with dynamic IPs

I have a firewall with 2 connections to the internet (eth1 and eth2) and one LAN interface. on the LAN interface, the users can connect via PPTP. those authenticating via pptp shall be masqueraded over eth2, those not authenticating should be ordinary masqueraded over eth1. as from the archives I took the configuration like in FAQ32, but this doesn''t work with the ppp+ interfaces. I

Hi, can you tell me how to set up routing of packets comming from pptp clients connected to my FW. For now I managed to initialize the vpn with ppp+ byt I can''t MASQ it in the /etc/shorewall/masq file. I entered there this: eth0 eth1 and pptp is working fine but now everybody can change thair IPs and get Internet. How exactly should I set it up. I am running shorewall o n

I have a firewall running Shorewall 1.3.13-1 from rpm on a redhat 7.3 box. The box has three nics assigned to zones loc net and dmz. We also have multiple vpn links accomplished via ssh tunnels, These links all come from dynamic IP addresses with known private subnets behind them. There are basically two types of networks these vpns connect, one with access to almost everything and one with

Hi , this probably was asked many times before , but here it goes.. Until now i was using dsl_qos_queue - http://www.sonicspike.net/software/ Which limits outbound traffic and does packet priorites with iptables using MARKed packets.. works very well , I run a ftpserver + webserver so it''s usefull to set these 2 with lowest priority and my multiplayer gaming running on certain UDP ports

Hello, I have a serious problem with HTB which I wasn''t able to solve myself. I run a masquerading router with ppp0 as interface to the Internet. Three clients need to share a downstream of 1 MBit, which I want to divide with tc. When I see a packet being forwarded to one of these clients, I give it the appropriate unique mark: iptables -t mangle -A FORWARD -d 192.168.34.141 -j MARK

I have a private lan that is connected to the world via 3 dsl lines. I put up a linux box that handles all the dsl lines, lan gateway and all is working well...until...one of the dsl lines goes down. My routing table is: x.x.x.x dev ppp0 proto kernel scope link src x.x.x.x x.x.x.x dev ppp1 proto kernel scope link src x.x.x.x x.x.x.x dev ppp2 proto kernel scope link src x.x.x.x

Now I have a weird problem I have testing with two networks. This trouble has to do with the hosts file. #ZONE HOST(S) OPTIONS loctw eth1:192.168.50.0/24 loctw ppp+:!192.168.50.0/24 locsa eth1:192.168.75.0/24 locsa ppp+:!192.168.75.0/24 loc eth1:192.168.25.0/24 #vpn3 ppp+:192.168.3.0/24 I can get through only one tunnel at

#!/bin/sh PPP=(ppp0 ppp1) IP=(`ifconfig ${PPP[0]}|sed -n 2p|column -s ":" -t|awk ''{print $3}''` `ifconfig ${PPP[1]}|sed -n 2p|column -s ":" -t|awk ''{print $3}''`) GATEWAY=(`ifconfig ${PPP[0]}|sed -n 2p|column -s ":" -t|awk ''{print $5}''` `ifconfig ${PPP[1]}|sed -n 2p|column -s ":" -t|awk ''{print

This is a minor release of Shorewall. WARNING: This release introduces incompatibilities with prior releases. See http://www.shorewall.net/upgrade_issues.htm. Changes are: a) There is now a new NONE policy specifiable in /etc/shorewall/policy. This policy will cause Shorewall to assume that there will never be any traffic between the source and destination zones. b) Shorewall no longer

My Internet gateway is using ADSL PPPoE connection with dynamic public IP assigned by ISP. My Internet gateway is Redhat AS3 U2, shorewall 2.0.9 As my ISP provided 4 simultaneous pppoe dailup connection for the same physical adsl line. My linux server can be configured for multiple pppoe connection i.e. ppp0, ppp1, ppp2, ppp3 Is it possible of shorewall to assigned say ppp0''s IP is

Anyone please!!! -----Original Message----- From: samba-admin@lists.samba.org [mailto:samba-admin@lists.samba.org] On Behalf Of Timothy Kersten Sent: Wednesday, 26 June 2002 1:12 PM To: samba@lists.samba.org Subject: [Samba] Joining XP Pro Client to Samba Domain- Was working, not anymore I have searched for 2 days on the net and can't find an answer. I am trying to joing a winXP machine

Hi, I''m in a process of setting up a firewall system, which is going to be also an ipsec/l2tp and pptp vpn server for some mobile clients. The problem is, that the system has two ISPs a cable one (no problems here) and a DSL provider. Because of the DSL provider the system is going to have one pppN interface for DSL (net zone) and many pppX interfaces for l2tp/pptp (loc zone)

Hi Folks! I''m new to shorewall (in the process of switching from Bastille), and I have a question as to how to address using Bluetooth enabled Palms with a BT dongle on a linux box protected by shorewall. Basically I followed the directions located at http://www.metacon.ca/bcs/view.php?page=bluetooth to get things working strictly with iptables, specifically: echo

ehlo list, I''m willing to shape ppp users e.g. each pppX interface to get XXX kbits I classify traffic going to ppp+ interfaces like this: iptables -t mangle -A POSTROUTING -o ppp+ -j CLASSIFY --set-class 0002:0020 then i have a file which is executed when a ppp inteface is up and first argument parsed to that file ($1) is the ppp number (e.g. 35 for ppp35). it generally looks like

yes, this is a crazy subject. I have 4 ADSL lines to the same provider, which even have the same gateway. Those lines are connected to the same machine (more crazyness: even connected to the same nic. it works fine, I swear). this machine will serve this conenction to a local net. so, I setup the ifaces correctly, everything works. I add balancing using this command: # ip route replace default