similar to: modules ipt_conntrack ipt_pkttype not found

On Sat, Dec 24, 2005 at 11:03:36PM +0300, Andrey J. Melnikoff (TEMHOTA) wrote: > Hello. Hi Andrey, > Please, CC me, i'm not subscribed. > > Kernel 2.6.15-rc6 OOPS: > > kernel: general protection fault: 0000 [#1] > kernel: SMP > kernel: Modules linked in: ipt_REDIRECT ipt_LOG ipt_TOS ipt_TCPMSS ipt_tos > ip_nat_ftp ipt_tcpmss iptable_nat ip_nat iptable_mangle

hi all, i want to try htb3 with imq downloaded & patched imq & htb3 with kernel-2.4.18 on rh7.2 but got STUCK on step 1 :( this are what i did can anyone guide me what went wrong on the first step itself !! [root@cab1 root]# modprobe imq numdevs=1 modprobe: Can''t locate module imq [root@cab1 root]# [root@cab1 root]# tc qdisc add dev imq0 handle 1: root htb default 1 Cannot find

I''m trying to setup Shorewall 2.0.8 with the one-interface settings on my LFS (kernel 2.6.5) system. I''ve read the troubleshooting guide, recompiled my kernel with just about every netfilter/iptables module I could find, but I''m still getting this error: # tail /tmp/trace + prefix=Shorewall:smurfs:DROP: + ''['' 22 -gt 29 '']'' +

a.shubnik@btis.by wrote: > Hello Tom! Aleksandr, In the future, please don''t send your Shorewall support requests directly to me. Please see http://www.shorewall.net/support.htm: > I try to start last version of shorewall-4.0.2 under openvz environment > in virtual server and get follow error messages: > > gate ~ # shorewall check > Checking... > >

Hello, I''ve shorewall running a three interfaces firewall (net, loc, dmz) and I''ve got performances problems. My measured bandwidth from internet is up to 6.8 Mb/s, and I "only" get 3.5Mb/s on my LAN and 5Mb/s on my dmz. I checked with iperf, and all my interfaces (eth0, eth1, eth2) can actually work at 10 Mb/s. I tried disabling all the rules from loc to net

Hi, on a system RedHat 8.0, only on this, not on other various RedHat8.0, I have see the follow strange error in /var/log/{messages,boot.log} ..... After the boot all it seems to work, the modules is loads.... I have already tried to install other versions of kernel but the problem is always the same one :-(( Someone has some idea of what is happening? Thanks... Dario Lesca

Hi, We have 2 offices interconnected with a VPN. This is the policy file in both of the Firewalls: fw loc ACCEPT loc fw ACCEPT #fw net DROP info fw net ACCEPT loc net DROP info loc vpn ACCEPT vpn loc

Hi all.. I have found some problems on smbfs module in 2.4.18 kernel. I compiled it by myself (not the very first kernel compilation in my life ;-)) and then I have got it. Looks like it touch smbfs module as when I recompile 2.4.18 modules with smbfs sources changed to sources of smbfs from 2.4.17 problem disappears!! My mainboard is Abit BE6 with Pentium III 450 MHz. I am using SuSE 7.3 with

I''m very new to shorewall. My setup is IP Gateway (CentOS 4 + Shorewall) with 3 NIC cards. Shorewall works great on the firewall machine. Bind also works (local net machines get IPs fine). Under firestarter, all works great. With shorewall, the loc machines can not route past the firewall. They can connect to the firewall, but not past it. Exactly what information should I post to get

Hello, I''ve tried to change ipt_conntrack hashsize and con under my debian charge but doesn''t work ! Ive got 2876Mb available for conntrack so I''ve done (according to some previous mail and this http://www.wallfire.org/misc/netfilter_conntrack_perf.txt) CONNTRACK_MAX = 2876 * 64 = 184064 HASHSIZE = 2876 * 8 = 23002 But the near power of 2 is 2^16 = 131072

Hi! Taking into consideration the great speed with which the use of P2P filesharing systems is expanding, is there any plan of including ipp2p and ipt_CONNTRACK support into shorewall? I''m sure that many admins managing gateways would be very happy about it... Thanx, -- Mario R. Pizzolanti <mario@zavood.ee> Zavood O?

I have a contingency table with a 0/1 variable (fwr) that flags a particular condition, a weight variable (cnt) and other variables (e.g. zz) characterizing that observation of the table. I am trying to use GLM. By converting the variables to factors and running the following regression: fwr1<-factor(fwr) zz1<-factor(zz1) res1<-glm(fwr1 ~ zz1,weights=cnt) Is that appropriate? Paul M.

https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=529 Summary: OOPS in nf_conntrack_ipv6 with fragmented UDPv6 Product: netfilter/iptables Version: linux-2.6.x Platform: All OS/Version: All Status: NEW Severity: critical Priority: P2 Component: nf_conntrack AssignedTo:

I have had a web server listining sql-1433, www 80, ftp-21 using proxy arp with sub-netting in a three interface DMZ. All these ports are in the rules file as ACCEPT. With one exeception that 1433 allows a few host from the net. 21 and 80 allow all net to dmz connections. The policy is DMZ to net ACCEPT This has been working great for about a month or more until I rebooted the

Hi all. On Sep 26th I decided to try and get ipp2p working on my machine that acts as a gateway for my Internet connection. This machine is running Debian. I performed the install by doing the following steps: - I installed the Debian package called linux-source-2.6.22 for my Linux kernel source and unpacked the resulting tar.bz2 file. - From the netfilter.org site I downloaded the following

mdew:~# tc qdisc add dev imq0 handle 1: root htb default 12 r2q 1 Cannot find device "imq0" mdew:~# lsmod Module Size Used by Not tainted ipt_REDIRECT 728 0 (autoclean) ipt_MARK 728 2 (autoclean) iptable_mangle 2100 1 (autoclean) ipt_REJECT 2712 4 (autoclean) iptable_filter 1672 1 (autoclean)

We have a (supposedly) quite standard setup: 2 Dom0 with drbd-on-lvm and a bunch of DomU, on Quad Xeon Dell servers. We tried with both sid-based and etch-based (+ 3.1 xen hypervisor and drbd 8 from backports.org ) Dom0, and quite consistently have "kernel: invalid opcode: 0000 [1] SMP" errors which freezes Dom0 (during lasts tests a simple start-and-stop loop of 10 DomU can trigger

I said: > # MSS CLAMPING > # Your kernel must have CONFIG_IP_NF_TARGET_TCPMSS set. > > I''ve activated the option, but to no result watsoever. > Checked my kernel config, and it states that CONFIG_IP_NF_TARGET_TCPMSS is a > loadable module, that should be loaded on demand. > Simon said: > Did you try adding it to /etc/shorewall/modules ? Actually, no I

The only database access package I see on CRAN is DBI. But is there a PostgreSQL driver for it yet? (where?) There is no sign of an RPgSQL package on CRAN either. What to do? Thanks, Bruce L. -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- r-help mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html Send "info", "help", or

Currently I have shorewal 2.2 installed om my debian 2.6.8 kernel. The firewall machine can access the internet via a ethernet modem fine. The firewall can ping the local network. The local network can ping the firewall server, see the samba files. Howeven teh local network cannot access the internet through the firewall Any suggestions? Rob van Overbruggen Settings and stats: Server: Eth1 :