similar to: RFC1918 all of a sudden?

Hi, I''ve a little problem, I hope so.. First a hint, I haven''t a static IP - Adress and so I used a dyndns Provider. In DMZ runs a sftp server. It should accessible from net. My router is forwarding the traffic from port 22 to the machine in DMZ. Now, in basic installation I have rfc1918-dropping configured by net interface. My problem: If rfc1918 dropping is on I

Hi folks, Has anyone tested the changes to multiple ISPs/load balancing or routestopped in 2.4.0-RC1 yet? We need to talk about what criteria we will use for determining whether 2.4.0 is ready for release. I''ve started configuring a firewall at work with the multiple ISPs support, but its kernel doesn''t have connection marking support, so it''s going to be a couple of

hi, i have a strange situtation. i try to connect to my machine with ssh and the packets are dropped but i have at the top of my rules an accept. the configuration looks like: rules-file: ----------- ACCEPT net fw tcp 22 - TCPDUMP-log: ------------ 12:16:08.153934 84.153.98.30.1322 > [my-destination-machine].ssh: S 3717288415:3717288415(0) win 64240 <mss

hi: Just a litle update: 41/8 allocated to AfriNIC (APR 2005). 73/8 allocated to ARIN (MAR 2005). hope it helps.

Hello all, Yesterday I noticed that my system was "leaking" traffic towards the 10/8 network, I have shorewall installed on multiple machines ranging from single interface devices to ones with 10+ interfaces. I tested all the boxes and they are showing the same behavior. All systems are CentOS 3.4, 2.4.21-27.0.2.ELsmp. Shorewall version: 2.2.1 For the host mentioned is a single

http://shorewall.net/pub/shorewall/Beta ftp://shorewall.net/pub/shorewall/Beta -Tom -- Tom Eastep \ Nothing is foolproof to a sufficiently talented fool Shoreline, \ http://shorewall.net Washington USA \ teastep@shorewall.net

Updated rfc1918 and bogons files are now available: rfc1918 for Shorewall 2.0.0 and earlier: http://shorewall.net/pub/shorewall/errata/1.4.10/rfc1918 bogons for Shorwall 2.0.1: http://shorewall.net/pub/shorewall/errata/2.0.1/bogons Thanks go to Thomas Backlund for pointing out that the file was out of date. -Tom -- Tom Eastep \ Nothing is foolproof to a sufficiently talented fool

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 To reflect recent allocations by the IANA, the following files are available: For Shorewall 2.0.0b and earlier: http://shorewall.net/pub/shorewall/errata/1.4.10/rfc1918 ftp://shorewall.net/pub/shorewall/errata/1.4.10/rfc1918 For Shorewall 2.0.1 and later: http://shorewall.net/pub/shorewall/errata/2.0.10/bogons

Hi I''ve come accross a small problem with the rcf1918 address blocking on my internet interface. Im connected via a cable modem and it has an internel web server that allows me to configure/monitor it but as expected if I enable rfc1918 blocking for my eth0 interface(The internet one) it also blocks the cable modems web server. Is there any way it can add a rule before the rfc1918

hi all, shorewall claim that support stateful connection. But I read the document, I can''t found any configuration on it like in iptables e.g. -m -state NEW, ESTABLISHED something like like. Is shorewall by default is staeful connection for any connectione.g. web, http

I came across a problem when one of our clients was not able to access any of the servers on our network. This person has never connected to us before and now for this first time was trying to do it from his home is Houston, TX using earthlink cable service provided by Time Warner. All this information, I think, is important because when I started examining my shorewall logs I found out

Hello, when I execute "shorewall hits" command I find this stats: HITS IP DATE ---- --------------- ------ 92099 192.168.0.2 Nov 24 7764 59.104.107.85 Nov 23 3997 192.168.1.77 Nov 24 337 181.50.93.89 Nov 23 331 59.104.156.68 Nov 23 315 99.109.157.73 Nov 23 301 190.225.157.40 Nov 23 275 179.153.183.53 Nov 23 268

I have been using shorewall and freeswan successfully for 3 or more years now. But they have all been using the Linux 2.4 kernel. My current configuration is (as the title suggests) using SuSE 9.1 which has a 2.6.5 kernel and freeswan 2.0.4 built-in. After much reading and a lot of trial and error, I did get this combination to work with Shorewall 2.0.9. It is happily talking to an older Mandrake

As far as I can tell from <http://shorewall.net/errata.htm> the current shorewall bogons file is <http://shorewall.net/pub/shorewall/errata/2.0.8/bogons> which contains the line: 58.0.0.0/7 logdrop # Reserved This is incorrect. These two /8s were allocated to APNIC as of April 2004. See also <http://marc.theaimsgroup.com/?l=nanog&m=108319003517919&w=2> and the main

Please, help me. Can i forbid and how any outgoing traffic (ping,trace) to rfc1918 networks on my external interfaces? Thank you very much. Aleksandr -------------------- Продукция AcmePower - это зарядные устройства, аккумуляторы формата АА и ААА, сетевые адаптеры, аккумуляторные батареи для фото и видеокамер, ноутбуков и PDA. Гарантия минского сервисного центра.

I have several computers connected to the internet through a DSL router that assigns rfc1918 (192.168.1.x) addresses to the systems connected. I have a server where shorewall is installed with one interface eth0, with a static ip (192.168.1.3). The router is configured to forward all connections from the internet to the linux server. I''d like to know how I can configure shorewall to

I don't know if this is the right place, but it is a place to start. I have two machines in a co-location facility. They are both on the same physical network segement and have real internet addresses and RFC1918 addresses. We get charged for traffic which goes across the "real" internet addresses which is part of the purpose for the RFC1918 network. The problem is connecting

Hello All, I have a question about setting up the shorewall firewall for squid, I followed the instructions on "Using Shorewall with Squid" --> "Squid Running in the DMZ" section. For some reason I am unable to get the program to work. I am able to have the squid work properly by using squidclient program, but once I setup the firewall to use the redirect I am unable to

A new rfc1918 file that reflects the recent IANA allocation of 222/8 and 223/8 may be found at: http://www.shorwall.net/pub/shorewall/errata/1.3.14/rfc1918 ftp://ftp.shorewall.net/pub/shorewall/errata/1.3.14/rfc1918 -Tom -- Tom Eastep \ Shorewall - iptables made easy Shoreline, \ http://www.shorewall.net Washington USA \ teastep@shorewall.net

Hi List, I read this list for nearly two years and learnt a lot, but now i have a very strange problem I can''t solve.. I have a firewall machine running Debian, which connects a small office to the internet via a DSL-line (with pppoe) and which is running Shorewall. It allows all outbound traffic and accepts pptp, openvpn and ssh-connections (on a non-standard port) from the internet.