similar to: Shorewall 2.2.2 and kernel-2.6.11

Hi! Taking into consideration the great speed with which the use of P2P filesharing systems is expanding, is there any plan of including ipp2p and ipt_CONNTRACK support into shorewall? I''m sure that many admins managing gateways would be very happy about it... Thanx, -- Mario R. Pizzolanti <mario@zavood.ee> Zavood O?

Hi! I''m wondering whether anyone has successfully set up a bandwidth control system using ipp2p and shorewall. I have been able to drop connecions altogether, but I don''t seem to be able to get CONNMARK working with ipp2p. Any pointers would be greatly appreciated :) ______________________________ Mario R. Pizzolanti

I''ve set up shorewall with the two-interface mode. pc #1 eth1 ---> ppp0 ---> Internet eth1: 10.10.10.254 eth0: 10.10.10.1 > via a crossover cable pc #2 eth0: 10.10.10.2 (gateway=10.10.10.254) I am able to surf the net with pc #1, but pc #2 is completely cut off from pc #1 and the net. I am also unable to ping from and to pc #2.

Hello, Is there a way to route p2p traffic on a separate ISP connection, just as you would choose a separate connection for http traffic? I tried all sorts of setups based on: http://www.braindump.dk/en/wiki/?wikipage=PolicyRouting but with no luck. Please help :) (ipp2p is up and running) _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

I have a script for dual internet connections that does this: ------------------------- #!/bin/bash IF1=eth1 IP1=203.219.190.106 P1=203.219.190.105 P1_NET=203.219.190.104 IF2=eth2 IP2=220.245.224.46 P2=220.245.224.45 P2_NET=220.245.224.44 IF0=eth0 P0_net=192.168.0.0 TABLE1=inet1 TABLE2=inet2 ip route add $P1_NET dev $IF1 src $IP1 table $TABLE1 ip route add default via $P1 table $TABLE1 ip

Hi, I want to block Yahoo Messenger, MSN messanger and Kazza with IPTABLES as my local network users always go there. How Can I do it? I am not runnig iptables as a script nor have I put anything in my rc.local. But instaed, I input the commands and save it by using the below cmmand /etc/init.d/iptables save and I restart it /etc/init.d/iptables restart My box runs on Cent OS 4.4. Help

I am trying to get IPP2P working on my router. Thus far I can see connections being marked (see below), but they don''t seem to get saved or something. When looking at /proc/net/ip_conntrack, nothing has anything other than 0 for mark. The iptables commands for this are: iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark iptables -t mangle -A PREROUTING -m mark ! --mark 0 -j

Hi, A, B and C are three machines. A and C directly access to theInternet while B access to the Internet through A. +-------------------------------------------------------------+ | +-------------+ +-------------+ | | | A | | B | | | | | --- eth0 ---> <--- eth0 --- | | | | | 192.168.0.1

Hello list, I''m newbie in this list. Well, i''m going crazy with ipp2p. Googling i find a mini-howto but i''ve got problems. 1) Download: * iptables-dev (apt-get) * kernel-headers-2.x.x (your kernel, "uname -r") * src of your iptables (iptables -V and apt-get source) * ipp2p-0.8.0.tar.gz (stable) 2) untar ipp2p and cd ipp2p 3) Edit Makefile, if it''s

Hi I using ipp2p to block p2p traffic. How to enable to use p2p to me host in my net ? I using this setup: iptables -A FORWARD -m ipp2p --ipp2p --bit --apple --winmx --soul --ares -j DROP This setup: iptables -A FORWARD -m ipp2p --ipp2p --bit --apple --winmx --soul --ares -d ! mynet -j DROP iptables -A FORWARD -m ipp2p --ipp2p --bit --apple --winmx --soul --ares -s ! mynet -j DROP not

Hey, one more question for ipp2p iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j CONNMARK --restore-mark iptables -t mangle -A DSL-IN -p tcp -m mark ! --mark 0 -j ACCEPT iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j MARK --set-mark 7 iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j CONNMARK --save-mark iptables -t mangle -A DSL-IN -p udp -m ipp2p --ipp2p -j MARK

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Is there interest in ipp2p support in Shorewall? While the ipp2p code is not part of the standard kernel.org distributions, my experience is that it is very easy to install and I would be willing to provide support for it if there is interest. See http://rnvs.informatik.uni-leipzig.de/ipp2p/index_en.html for information about ipp2p. - -Tom - -- Tom

Hi.... I''m trying to setup a LAN router with P2P filter but the problem is that can''t "catch" Ares. There is a way to DROP "ares" p2p packets ? I''ve tried with last "ipp2p" snapshot without sucess... I''ve Kernel 2.4.28 iptables 1.3.0 Various Patches from patch-o-matic-ng-20040621 iproute2-ss020116 IMQ Patch Esfq Patch

Hi all. On Sep 26th I decided to try and get ipp2p working on my machine that acts as a gateway for my Internet connection. This machine is running Debian. I performed the install by doing the following steps: - I installed the Debian package called linux-source-2.6.22 for my Linux kernel source and unpacked the resulting tar.bz2 file. - From the netfilter.org site I downloaded the following

Greetings, I''ve searched, found ftwall, and some other commercial solutions, but am wondering if anyone on this list has any solutions using a linux firewall to block p2p traffic, more specifically Kazaa. Walter Wickersham _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hey guys, I''ve just built a sparc64 (Ultra/5) based firewall with ipp2p compiled as a module and I''m constantly getting the following message in my logs: Kernel unaligned access at TPC[100f8490] search_all_edk+0x20/0x4c [ipt_ipp2p] I''m running the following versions: - Kernel 2.6.22 - ipp2p 0.8.2-r4 - iptables 1.3.8-r1 Any thoughts?

Hi, I''ve a linux as router nat + firewall (POLICY DROP for INPUT OUTPUT and FORWARD) but, I''ve put next rules for p2p software on FORWARD chain [... snip ... ] iptables -F FORWARD iptables -P FORWARD DROP iptables -A FORWARD -p tcp --dport 80 -j ACCEPT iptables -A FORWARD -p tcp --dport 25 -j ACCEPT [... snip ... ] iptables -A FORWARD -m ipp2p --ipp2p -j ACCEPT iptables -A

Hello every body: I have RedHat fedora core 2 machine, using iptables and squid. I am having a lot of problems with peer2peer traffic. (bittorrent, kazaa, etc.) so I have installed ipp2p from rpm. Every thing was ok until I use iptables rules. I get this error. [root@router iptables]# iptables -A INPUT -p tcp -m ipp2p --ipp2p -j DROP iptables: No chain/target/match by that name sames

Hello, can anybody interpret what the following means: [root@funke ipp2p-0.8.0]# iptables -t mangle -A MarkList0x666-ipp2p -p tcp -m ipp2p --edk -j MarkSet0x666 iptables: Unknown error 4294967295 ----- I have installed ipp2p-0.8.0 via: make copied ipt_ipp2p.ko to my kernel lib dir copied libipt_ipp2p.so to my iptables lib dir insmod ipt_ipp2p gives the following in dmesg: IPP2P v0.8.0

Hi, I get this error when trying to insmod the ipp2p kernel module: "insmod: error inserting ''ipt_ipp2p.ko'': -1 Invalid module format" in the kernel log: "ipt_ipp2p: disagrees about version of symbol struct_module" Kernel version 2.6.20.4 iptables version: 1.3.5 ipp2p version: 0.8.2 (latest) Anyone tried ipp2p with kernel 2.6.20? Best Regards Niclas