Hello list, I''m newbie in this list. Well, i''m going crazy with ipp2p. Googling i find a mini-howto but i''ve got problems. 1) Download: * iptables-dev (apt-get) * kernel-headers-2.x.x (your kernel, "uname -r") * src of your iptables (iptables -V and apt-get source) * ipp2p-0.8.0.tar.gz (stable) 2) untar ipp2p and cd ipp2p 3) Edit Makefile, if it''s necesary: * IPTABLES_SRC = /usr/src/iptables * In my case, the headers are detected automaticaly. 4) make (WITHOUT ERRORS!!! ;) ) 5) cp libipt_ipp2p.so /lib/iptables 6) cp ipt_ipp2p.ko /lib/modules/`uname -r`/kernel/net/ipv4/netfilter 7) depmod -A 8) insmod ipt_ipp2p.ko (or modprobe) 9) lsmod | grep ipp2p 10) iptables -m ipp2p --help root@servidor:/usr/src/ipp2p-0.8.0# make make -C /lib/modules/2.6.15-28-386/build SUBDIRS=/usr/src/ipp2p-0.8.0 modules make[1]: se ingresa al directorio `/usr/src/linux-headers-2.6.15-28-386'' CC [M] /usr/src/ipp2p-0.8.0/ipt_ipp2p.o Building modules, stage 2. MODPOST CC /usr/src/ipp2p-0.8.0/ipt_ipp2p.mod.o LD [M] /usr/src/ipp2p-0.8.0/ipt_ipp2p.ko make[1]: se sale del directorio `/usr/src/linux-headers-2.6.15-28-386'' gcc -O3 -Wall -DIPTABLES_VERSION=\"\" -I/usr/src/iptables-1.3.3/include -fPIC -c libipt_ipp2p.c ld -shared -o libipt_ipp2p.so libipt_ipp2p.o Seems that all it''s ok... . . . But ... root@servidor:/usr/src/ipp2p-0.8.0# iptables -m ipp2p --help iptables: match `ipp2p'' v (I''m v1.3.1). Only i get this line, iptables: match `ipp2p'' v (I''m v1.3.1) root@servidor:/usr/src/ipp2p-0.8.0# iptables -A FORWARD -m ipp2p --ipp2p -j DROP iptables: match `ipp2p'' v (I''m v1.3.1). Only one line, again. root@servidor:/usr/src/ipp2p-0.8.0# iptables -L FORWARD Chain FORWARD (policy DROP) target prot opt source destination DROP !icmp -- anywhere anywhere state INVALID eth0_fwd all -- anywhere anywhere eth1_fwd all -- anywhere anywhere Reject all -- anywhere anywhere LOG all -- anywhere anywhere limit: avg 5/min burst 2 LOG level info prefix `Shorewall:FORWARD:REJECT:'' reject all -- anywhere anywhere I don''t see anything of ipp2p. (In Spanish: Nada por aquí nada por allá :) ) Always i get the same results with: Ubuntu Dapper Kernels: 2.6.15-27-386, 2.6.15-28-386 iptables: 1.3.3 ipp2p: 0.8.0 Ubuntu Breezy (i think) Kernel: 2.6.12-10-386 iptables: 1.3.1 ipp2p: 0.8.0 I don''t know what''s going on. Any ideas? Thank you all Juanen
On 3/14/07, J.E. <jecarb@menta.net> wrote:> > > root@servidor:/usr/src/ipp2p-0.8.0# iptables -m ipp2p --help > iptables: match `ipp2p'' v (I''m v1.3.1). > > Only i get this line, iptables: match `ipp2p'' v (I''m v1.3.1)You are running iptables version 1.3.1, and this is not the version you compiled ipp2p for (1.3.3) What is the output of the ipp2p make install? -- Marco root@servidor:/usr/src/ipp2p-0.8.0# iptables -A FORWARD -m ipp2p --ipp2p> -j DROP > iptables: match `ipp2p'' v (I''m v1.3.1). > > Only one line, again. > > root@servidor:/usr/src/ipp2p-0.8.0# iptables -L FORWARD > Chain FORWARD (policy DROP) > target prot opt source destination > DROP !icmp -- anywhere anywhere state INVALID > eth0_fwd all -- anywhere anywhere > eth1_fwd all -- anywhere anywhere > Reject all -- anywhere anywhere > LOG all -- anywhere anywhere limit: avg > 5/min burst 2 LOG level info prefix `Shorewall:FORWARD:REJECT:'' > reject all -- anywhere anywhere > > I don''t see anything of ipp2p. > (In Spanish: Nada por aquí nada por allá :) ) > > Always i get the same results with: > > Ubuntu Dapper > Kernels: 2.6.15-27-386, 2.6.15-28-386 > iptables: 1.3.3 > ipp2p: 0.8.0 > > Ubuntu Breezy (i think) > Kernel: 2.6.12-10-386 > iptables: 1.3.1 > ipp2p: 0.8.0 > > I don''t know what''s going on. Any ideas? > > Thank you all > Juanen > _______________________________________________ > LARTC mailing list > LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc >-- Marco _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Thank you Marco. >> You are running iptables version 1.3.1, and this is not the version you compiled ipp2p for (1.3.3) But I make a mistake in my explanation. I''ve mixed the results of Ubuntu Dapper with results of Ubuntu Breezy, sorry. Instead of 1.3.1 should it would have to put 1.3.3. In any case I will verify it. But i''m sure at 99% that i''ve used the correct source code. >> What is the output of the ipp2p make install? I don''t made "make install". Is it necesary? Simply i made 5) cp libipt_ipp2p.so /lib/iptables 6) cp ipt_ipp2p.ko /lib/modules/`uname -r`/kernel/net/ipv4/netfilter May be I need to recompile iptables? I''m using the same version of iptables debian packet, to compile ipp2p. May be it''s a silly question, but now i doubt of everything. ;) First time: ----------- Compiled in Ubuntu Dapper Kernel: 2.6.15-28-386 iptables: 1.3.3 ipp2p: 0.8.0 Second time: ------------ Compiled in Ubuntu Dapper Kernel: 2.6.15-27-386 iptables: 1.3.3 ipp2p: 0.8.0 Third time: ------------ Compiled in Ubuntu Breezy Kernel: 2.6.12-10-386 iptables: 1.3.1 ipp2p: 0.8.0 -------------------- This would be the correct explanation. 1) Download: * iptables-dev (apt-get) * kernel-headers-2.x.x (your kernel, "uname -r") * src of your iptables (iptables -V and apt-get source) * ipp2p-0.8.0.tar.gz (stable) 2) untar ipp2p and cd ipp2p 3) Edit Makefile, if it''s necesary: * IPTABLES_SRC = /usr/src/iptables * In my case, the headers are detected automaticaly. 4) make (WITHOUT ERRORS!!! ;) ) 5) cp libipt_ipp2p.so /lib/iptables 6) cp ipt_ipp2p.ko /lib/modules/`uname -r`/kernel/net/ipv4/netfilter 7) depmod -A 8) insmod ipt_ipp2p.ko (or modprobe) 9) lsmod | grep ipp2p 10) iptables -m ipp2p --help root@servidor:/usr/src/ipp2p-0.8.0# make make -C /lib/modules/2.6.15-28-386/build SUBDIRS=/usr/src/ipp2p-0.8.0 modules make[1]: se ingresa al directorio `/usr/src/linux-headers-2.6.15-28-386'' CC [M] /usr/src/ipp2p-0.8.0/ipt_ipp2p.o Building modules, stage 2. MODPOST CC /usr/src/ipp2p-0.8.0/ipt_ipp2p.mod.o LD [M] /usr/src/ipp2p-0.8.0/ipt_ipp2p.ko make[1]: se sale del directorio `/usr/src/linux-headers-2.6.15-28-386'' gcc -O3 -Wall -DIPTABLES_VERSION=\"\" -I/usr/src/iptables-1.3.3/include -fPIC -c libipt_ipp2p.c ld -shared -o libipt_ipp2p.so libipt_ipp2p.o Seems that all it''s ok... . . . But ... root at servidor:/usr/src/ipp2p-0.8.0# iptables -m ipp2p --help iptables: match `ipp2p'' v (I''m v1.3.3). <--- mistake Only i get this line, iptables: match `ipp2p'' v (I''m v1.3.3) <--- mistake root at servidor:/usr/src/ipp2p-0.8.0# iptables -A FORWARD -m ipp2p --ipp2p -j DROP iptables: match `ipp2p'' v (I''m v1.3.3). <--- mistake Only one line, again. root at servidor:/usr/src/ipp2p-0.8.0# iptables -L FORWARD Chain FORWARD (policy DROP) target prot opt source destination DROP !icmp -- anywhere anywhere state INVALID eth0_fwd all -- anywhere anywhere eth1_fwd all -- anywhere anywhere Reject all -- anywhere anywhere LOG all -- anywhere anywhere limit: avg 5/min burst 2 LOG level info prefix `Shorewall:FORWARD:REJECT:'' reject all -- anywhere anywhere I don''t see anything of ipp2p. Thank you.
>> What is the output of the ipp2p make install?When i ''make install'' root@servidor:/usr/src/ipp2p-0.8.0# make install make: *** No hay ninguna regla para construir el objetivo `install''. Alto. This is the answer make: *** There''s no rules to build `install'' object. Stop. Logs don''t give me any clue. Any ideas?
Hi This is my small guide (in spanish) for compile ipp2p with iptables, I think that you have these errors because the script is looking for files in other directories. I had had similars problems, I suggest you that install it over a clon of redhat(centos, whitebox). I have installed it in these distributions and I does not have problems more. Guide IPP2P Para esto uso el ipp2p, aqui esta el procedimiento de como instalarlo: Tengo iptables instalado en rpm, extraer la version #iptables -V En un directorio especifico puede ser /opt o /tmp descomprime el ipp2p y las fuentes de mi iptables. Baje la version correspondiente de mi iptables-miversion.tar.gz desde la pagina de NETFILTER (ftp.netfilter.org) Luego te vas al directorio del ipp2p En el Makefile del ipp2p editar los siguientes parametros IPTABLES_BIN = /usr/sbin/iptables IPTABLES_SRC = /tmp/iptables-1.3.1 Luego hacer un # make Se crean los siguientes archivos en el directorio del ipp2p: libipt_ipp2p.so libipt_ipp2p.o ipt_ipp2p.o El archivo libipt_ipp2p.so moverlo a /lib/iptables Copiar los otros dos al /lib/modules/2.4.20-8/kernel/net/ipv4/netfilter luego hacer un # depmod -a Listo para definir una regla que bloquee todo el trafico P2P de kazza, ares, etc # iptables -A FORWARD -m ipp2p --ipp2p -j DROP On 3/14/07, J.E. <jecarb@menta.net> wrote:> >> What is the output of the ipp2p make install? > > When i ''make install'' > > root@servidor:/usr/src/ipp2p-0.8.0# make install > make: *** No hay ninguna regla para construir el objetivo `install''. Alto. > > This is the answer > > make: *** There''s no rules to build `install'' object. Stop. > > Logs don''t give me any clue. > > Any ideas? > _______________________________________________ > LARTC mailing list > LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc >-- "The network is the computer"
Hi,
Thank you Jorge.
Gracias Jorge.
Until now, i downloaded source of ubuntu packet with "apt-get source
iptables". Well, downloading the code from http://www.netfilter.org,
like you suggests, with the appropiate version ( in my case 1.3.3 ),
i''ve got it.
root@servidor:/usr/src/ipp2p-0.8.0# iptables -m ipp2p --help
iptables v1.3.3
Usage: iptables -[AD] chain rule-specification [options]
iptables -[RI] chain rulenum rule-specification [options]
iptables -D chain rulenum [options]
iptables -[LFZ] [chain] [options]
iptables -[NX] chain
iptables -E old-chain-name new-chain-name
iptables -P chain target [options]
iptables -h (print this help information)
Commands:
.
.
.
Thank you everybody.
Juanen
On Wednesday 14 March 2007 10:45, J.E. wrote:> Hello list, > > I''m newbie in this list. Well, i''m going crazy with ipp2p. > Googling i find a mini-howto but i''ve got problems. > > 1) Download: > * iptables-dev (apt-get) > * kernel-headers-2.x.x (your kernel, "uname -r") > * src of your iptables (iptables -V and apt-get source) > * ipp2p-0.8.0.tar.gz (stable) > 2) untar ipp2p and cd ipp2p > 3) Edit Makefile, if it''s necesary: > * IPTABLES_SRC = /usr/src/iptables > * In my case, the headers are detected automaticaly. > 4) make (WITHOUT ERRORS!!! ;) ) > 5) cp libipt_ipp2p.so /lib/iptables > 6) cp ipt_ipp2p.ko /lib/modules/`uname -r`/kernel/net/ipv4/netfilter > 7) depmod -A > 8) insmod ipt_ipp2p.ko (or modprobe) > 9) lsmod | grep ipp2p > 10) iptables -m ipp2p --help > > root@servidor:/usr/src/ipp2p-0.8.0# make > make -C /lib/modules/2.6.15-28-386/build SUBDIRS=/usr/src/ipp2p-0.8.0 > modules > make[1]: se ingresa al directorio `/usr/src/linux-headers-2.6.15-28-386'' > CC [M] /usr/src/ipp2p-0.8.0/ipt_ipp2p.o > Building modules, stage 2. > MODPOST > CC /usr/src/ipp2p-0.8.0/ipt_ipp2p.mod.o > LD [M] /usr/src/ipp2p-0.8.0/ipt_ipp2p.ko > make[1]: se sale del directorio `/usr/src/linux-headers-2.6.15-28-386'' > gcc -O3 -Wall -DIPTABLES_VERSION=\"\" -I/usr/src/iptables-1.3.3/include > -fPIC -c libipt_ipp2p.c > ld -shared -o libipt_ipp2p.so libipt_ipp2p.o > > Seems that all it''s ok... > . > . > . > But ... > > root@servidor:/usr/src/ipp2p-0.8.0# iptables -m ipp2p --help > iptables: match `ipp2p'' v (I''m v1.3.1). > > Only i get this line, iptables: match `ipp2p'' v (I''m v1.3.1) > > root@servidor:/usr/src/ipp2p-0.8.0# iptables -A FORWARD -m ipp2p --ipp2p > -j DROP > iptables: match `ipp2p'' v (I''m v1.3.1).ipp2p wasn''t able to detect your current iptables versión number at compile time, that''s why you see a ''v'' character with nothing behind. Edit the ipp2p Makefile, and make shure that it finds your iptables versión number. Do a make clean and rebuild. -- Luciano