similar to: sluggish stream problem - help

Hi Reuben, I think I remember having the same issue when I first used icecast. I think from the best of my memory I swapped from using shout to IceS and this solved the issue. I could be wrong though my memory isn't too good and you may actually be experiencing something totally different than me, however I would say with your bandwidth a 128 stream shouldn't be a problem. Hope this is

Hi, I am a newbie here. I just tried to set up mp3 streamer server on Redhat Linux 7.2, using icecast and shout. I then tried to connect to the server, from another machine and different LAN, using xmms. And the stream is so sluggish, it gets cuts off for every 2 seconds or so. Both LANs (the server and where I am connected from) are T1. My mp3 was all encoded in 128 KBps. I then asked someone

Hello, Pardon me if this turns out to be stupid question. I have an IP address blacklisted in /etc/shorewall/blacklist. I have BLACKLIS_LOGLEVEL not set in /etc/shorewall/shorewall.conf, but I can still see the packages coming from the blacklisted IP logged in /var/log/messages when I do ''tail -f /var/log/messages''. Is there someplace else I should check ? Thanks. RDB --

On Sat, 2002-07-20 at 14:43, Mark W. Davis wrote: > Did you try --with-lame-libraries=/usr/local/lame or variations thereof? > Some configure scripts do not like the explicit path to the library. > Yes, I tried all kind of variations I can think of. I even just now installed lame RPM, but it still didn't work. I can't think of anything else to try right now. Rdb

Did you try --with-lame-libraries=/usr/local/lame or variations thereof? Some configure scripts do not like the explicit path to the library. <p>On Fri, 2002-07-19 at 08:13, Reuben D. Budiardja wrote: > Hi all > I'd like to install ices with re-encoding support. So I installed the > latest stable lame from source. However, when I configure ices using > --with-lame option, it

Hi all I'd like to install ices with re-encoding support. So I installed the latest stable lame from source. However, when I configure ices using --with-lame option, it couldn't find the lame library. I specified --with-lame-libraries=/usr/local/lame/lib --with-lame-includes=/usr/local/lame/include/lame, and it still couldn't find it. I tried all kind of combination for specifying

On Monday, 20 September 2004 at 18:02, EvilOverlord wrote: > Reuben D. Budiardja wrote: > >Hello, > >I have both MP3 and OGG in my hard drive, since I used to use MP3 encoding > >and now I'm trying to move to OGG vorbis. I am wondering if there's a way > >to stream a playlist containing both MP3 and OGG files. As far as I > >understand from reading the

Hello, This is probably nothing, and I''m just the one missing something here. But I''m just curious. I am trying to run samba in one of my machines that run shorewall. But I forgot to add the rule to allow smb connection in my /etc/shorewall/rules. Of course when I tried to access the smb share from another machine, I couldn''t. I fixed that quickly, no problem.

Hi, Just one quick question. Can ices re-encode vorbis/ogg format on the fly? I know it can do that with mp3 format, but what about vorbis/ogg format? Thanks. Reuben D. Budiardja --- >8 ---- List archives: http://www.xiph.org/archives/ icecast project homepage: http://www.icecast.org/ To unsubscribe from this list, send a message to 'icecast-request@xiph.org' containing only the

Hello, I have both MP3 and OGG in my hard drive, since I used to use MP3 encoding and now I'm trying to move to OGG vorbis. I am wondering if there's a way to stream a playlist containing both MP3 and OGG files. As far as I understand from reading the doc, Ices-0.4 and Ices2 can only stream MP3 and OGG files respectively. So I just installed both. But is there a trick or something

Hello, My machine is running Software RAID 5 on /dev/hde1, /dev/hdg1,/dev/hdi1. I noticed on the log that suddenly we are getting messages such as : Oct 14 01:27:16 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 247 to 246 Oct 14 01:57:15 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure Attribute: 8 Seek_Time_Performance

Hey all,  I've been running a Win10 Pro (64bit) guest for some time now.... and originally it was pretty snappy and I had no complaints. Somewhere in about the last 3-6 months I've been noticing sluggish performance -- but not overall. The system is mostly remote so I do a lot of my admin via RDP or the local console with the KVM Manager. I recently did a complete fresh install of

Hi I often have troubles connecting to icecast from ices. Both are on the same machine. Sometime, especially when the machine has just been rebooted, when ices trying to stream to icecast, it is often denied for BAD PASSWORD. The curious thing is, both the ices and icecast config file were not even changed, and the password is match. I don't use any encryption I believe. Is this a known

Greetings, This is my first stab at this mailing list. Forgive me if I am over/under verbose. We have been running KVM for a while now and love it. Recently I have noticed a weird anomaly that is getting on my nerves. When I clone (GUI or virt-clone from CLI) both* virt-manager* and *virsh* enquiries get extremely sluggish. Using top I cannot see any resource issues. No I/O wait, the load

Somebody was helpful enough to give me the very latest release of Polycom's firmware (2.1.0). Unfortunately, I still get that issue. So I'm stuck asking again: Anybody ever got that? Mike _____ From: Mike [mailto:list@virtutel.ca] Sent: Wednesday, April 11, 2007 13:37 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Polycom 501 issue with latest

All, I have been using the following as a means of rate limiting access to the Internet via eth0 (which connects to my cable modem) and it was working great with my 2.4.20 kernel: tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 1 tc class add dev eth0 parent 1: classid 1:1 htb rate 486kbit ceil 486kbit tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10

I just noticed when using 2.6.1, 2.6.2 (2008-02-08), 2.6.2pat (2008-02-21 r44582), and 2.6.2pat (2008-03-24 r44975) on my poor old Celeron D330 (2.6 GHz; 3.5 years old) running Windows XP, that the mouse cursor appears to be redrawn more sluggishly when the pointer is over R windows graphics devices than over the R console window or other applications' windows. The slowdown seems to start only

Slackware 10.0. Wine version whatever was current a month ago, how do I tell what wine version I have? Anyhow, I'm experience two issues: I have KDE setup with 4 virutual desktops. If I'm running WinMX via wine, and if I try to switch to a different desktop, it immediately switches back. I basically can't use the other desktops because I can't switch to them. Also, I can't

Thomas suggested posting these here so they don''t get lost. Making Scriptaculous Snappy: *) Drag/Drop - make release cost proportional to remaining distance For drag/drop - change the ''release'' animation time to be proportional to the remaining distance the dropped item has to travel. If a user drags the item almost all the way to the final location, the release time

On Thu, Feb 18, 2016 at 10:41:42AM +0100, John Obaterspok wrote: >2016-02-18 10:13 GMT+01:00 Martin Kletzander <mkletzan@redhat.com>: > >> On Thu, Feb 18, 2016 at 08:49:38AM +0100, John Obaterspok wrote: >> >>> Hello, >>> >>> I'm using virt-manager on my F23 box to run a Windows 10 image but the >>> performance is so bad it's