similar to: Icq File Transfers

Hi, I have 2 internet nic''s with differents ISPs. eth0 = isp1 eth3 = isp2 My internal network is eth1 # /etc/interfaces net eth0 detect routefilter,norfc1918,blacklist net eth3 detect routefilter,norfc1918,blacklist loc eth1 detect # /etc/policy loc net ACCEPT net net DROP

Last question, I promise, I am running PopTop for PPTP on the same box as my firewall. I can connect to the box fine, but nothing will route between the VPN tunnel and the local hosts. I read the Some Hosts have Special Firewalling Requirements article and though it was what I needed, but either I don''t get it, or it doesn''t apply to me. Here is my config: Zones: #ZONE

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Hi all, I have a client that has 4 subnets within his building, internet, office, business center and wireless. My plan is to use Shorewall but I have never tested it with more than 2 interfaces. Is this possible? Would there be any issues that might arise. Each subnet would have access to the internet but there will be no communications allowed between the others. Thanks in advance....

Hi All, I just joined this list because I am setting up a firewall for my office and decided to use this great piece of software. I am having a problem understanding the documentation in the following areas: 1) shorewall seems to rewrite my routing table removing all my configurations. I have the following setup: at our webserver colo facility Inet --> eth0 (12 M ethernet) local -->

Hi, I had compiled support for MYSQL_FRIENDS and it works for SIP, but when use tiwh IAX2 I have some problem, I can register with a client, but when I try to make a call I got this error: Jul 17 12:52:03 NOTICE[229387]: chan_iax2.c:5183 socket_read: Rejected connect attempt from <IP-ADRRESS> When I google'ed this problem I can see other users also found this error (bug ?) But no-one

Hi Folks, Can i account proxyarped pc´s ?? Like know how much web traffic passthru a specific person ip using shorewall ? So i can know how much bandwidth that specific IP EAT ? Thanks alot Carlos Arnt ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward

Hi I try to implement a coarse-grained CFI in LLVM (CFI = Contorl Flow Integrity) I want to collect all address after call instructions address after a call equals to a valid return site in coarse-grained CFI I want to add a new section and write all the possible return address in the new section (and then, add the integrity check) I have some quetions: (1) Which part of LLVM code should

Hi, I'm trying to automatically have the dialplan assign an extension to a roaming phone on my network. I tried the following without success: exten => 3001,1(readop),BackGround(beep) exten => 3001,n,Read(digito,vm-youhave,3) exten => 3001,n,SayDigits(${digito}) exten => 3001,n,Set(ROAM=${digito}) exten => 3001,n,Set(DB(roam/ext)=${digito}) exten =>

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 As I pointed out to Wilson in a private message, this appears to show that no other connection requests (other than port 3000) are being sent from the client to the server (or at least no other connection requests are being received by the Shorewall box). Wilson: Are you sure that the client is supposed to open port 3001 on the server and not the

I have an application i''m installing on my application server. I''ve been using WEBrick and for now i''d like to just keep using it working in prototype development mode. This works fine on my development machine using both http and https, where the host is ''localhost'' (ports 3000,3001). It also works fine on the application server http port 3000. The

Hi I can get all my features by doing this: > logistic.model = glm(similarity ~ ., family=binomial, data = cData[3001:3800,]) I can get the product of all my features by this: logistic.model = glm(similarity ~ . ^ 2, family=binomial, data = cData[3001:3800,]) I don't seem to be able to get polys by doing this: logistic.model = glm(similarity ~ poly(.,2), family=binomial, data

Hi Users, I was wondering if someone of you have the same thing on CentOS 64x? asterisk01*CLI> core show translation Translation times between formats (in microseconds) for one second of data Source Format (Rows) Destination Format (Columns) g723 gsm ulaw alaw g726aal2 adpcm slin lpc10 g729 speex ilbc g726 g722 siren7 siren14 slin16 g723

Hi, Kopete does not show any contact in ICQ... Will there be fixes for this? Or do I have to wait for kde-redhat to support centos5? Thx Rainer

Hi @ all, I want to use wine to run ICQ2002a, because I do not like the Linux ICQ clones. But during the beginning of the installation-process I get the message, that i need the Setupapi.dll to install ICQ 2002a. Now I would like to know, if it is possible to import DLLs like the Setupapi.dll from the Windows 2000 installation of my other PC? I hope somebody of you can help me, Yours Lutz M.

hi, has anyone ever tried (hopefully with success ;-) to run icq2000a on wine ? (copied over or installation on wine wouldn't make any difference. i'd like to have this, 'cause i decided to kill my last windows-box. the only app i used there was ICQ. but i don't want to loose all my contacts and history-files. so i'm not going to use any linux-icq-clone (unless i find

Anybody has runned ICQ 2001b successfully with Wine? When I try to run it, it crashes on the startup. Maybe the fault is in NTDLL.dll.3 which has not implented fully yet? Or I don't have all dll's? I'm not sure for I'm a newbie with Wine... :( Well anyway here's the output of Wine: ----- Invoking /usr/bin/wine.bin icq ... fixme:win32:DeviceIo_MMDEVLDR

Maybe im the only one.. but I find putting the message type [WINE] in the header a very usefull tool when ppl like me get alot of mail... anyway, I tried to install the new version of ICQ using wine, and I got a bad version for '50comupd.exe' (which is com components), wine iteself installs 4.01 , not 5.0 . I installed 5.0, and it seems to install correctly, however I guess it doesnt do it

Hi, I configured Buddy Watch function on my Polycom IP 601. It works well, until I make a reload of Asterisk. After reload, if I give the "show hints" command in Asterisk's CLI, it says that there are no watcher for the extensions that I configured. Before the reload in the CLI appears: -= Registered Asterisk Dial Plan Hints =- 3002 : SIP/3002 State: