similar to: Re: Flac-dev digest, Vol 1 #595 - 1 msg

I just bought an I Audio mobile device (Btw, these thigns are the coolest players on the face of the earth.. might want to check em out). It plays ogg vorbis files rather nicely. My whole music library is sitting in flac format. When I encoded my flac files (the majority a year ago) I used replay gain to save the album and track information if the flac file. Unfortunately, the I audio doesnt like

Hello. I thought I'd introduce myself. I'm the guy that wrote kexis way back when. For those of you that dont know, kexis was written before flac, and pretty much does what flac does, although its not nearly as nice or robust. I wrote kexis actualy cause I was interested in playing around with lossless compression and shorten was about the only tool that was linux friendly, but had a

I did some research on patent claims on range and arithmetic coding. The original range code pdf presented in the UK by an ibm employee at the time asserts no patent claims what so ever. If there are patents I cant find em. I have the original paper in PDF if anyone cares to see it. Its a good candidate for encoding because browsing a few of the implememntations avaialable on line, I can roll my

On Tue, 2004-01-20 at 23:44, Josh Coalson wrote: > Miroslav did some experiments with searching for optimum blocksize. > from what I remember it made at best a couple percent difference. > there was a thread about it here a while back. > Did his changes make it in? I can think of a coupla ways to approach this and I'd like to hear about what he tried. A couple of % doesnt seem

--- Wayde Milas <wmilas@rarcoa.com> wrote: > The reason for this post is I would like to know if I start coding > again > and releasing patches agaisnt flac in various areas, if they will be > accepted. I'm not sure if these additions fit the "focus" of what > flac > is meant to be, so I thought I'd discuss them first. Keep in mind > that I > just

Hi, I've had some decent luck with the mark3 echo canceller from the zaptel driver, echos on about 20% of the calls, people I've called say I sound great now, but our side hears echos. I was wondering if there was any way to tweak the current software cancelers into using more CPU (and hopefully doing a better job, close to a hardware canceler), I only have 10 lines, and a single call

--- Wayde Milas <wmilas@rarcoa.com> wrote: > On Tue, 2004-01-20 at 23:44, Josh Coalson wrote: > > Miroslav did some experiments with searching for optimum blocksize. > > from what I remember it made at best a couple percent difference. > > there was a thread about it here a while back. > > > Did his changes make it in? I can think of a coupla ways to approach

--- Wayde Milas <wmilas@rarcoa.com> wrote: > The last one is truely frightening. AT&T hold the patent. The link > for > it is at: > http://patft.uspto.gov/netacgi/nph-Parser?u=/netahtml/srchnum.htm&Sect1=PTO1&Sect2=HITOFF&p=1&r=1&l=50&f=G&d=PALL&s1=5025258.WKU.&OS=PN/5025258&RS=PN/5025258 > Trying to read and grok it is mind numbing.

Hi Everyone, I'm new to asterisk and trying to get together the hardware to run a few POTS phone extentions and one or two POTS lines for starters. For these low port counts, I could just go with FXS and FXO cards, but... I can get a Cisco MC3810 with a mixture of FXO and FXS ports, the MC3810 comes with a built in ethernet port and I believe it does SIP too... Will this mean that I

Hi, I've got some weird sound artifacts happening during calls, they're very hard to describe, so I have a 122kb recording: http://openprojects.rarcoa.com/~miztic/artifact.wav normally the artifacts are just short blips, not quite as long as the one above, but they sound the same. When using the aggressive echo suppressor, it seems like those artifacts cause a really loud buzzing sound to

Hi list, I was wondering if anyone had any solution to either one of two issues I'm having: I have a cisco 7962G with the latest (from cisco) 8.5(4) SIP Firmware, it works very well for the most part, but after less then a week of heavy usage, eventually the phone gets into a state where it won't accept or let you place any more calls, the screen flashes "no free lines

Hi list, This is not necessarily an asterisk issue, but a lot of you guys know way more then me, so I have a question: someone at my company sets his phone to forward calls to his cellphone, so someone calls our office, call is forwarded to his cell, and the callerID that shows up on his cell is of course our office number, because asterisk originates a new call to his cell and then bridges

I have several Cisco 79xx phones (7905, 7920, 7940, 7960, 7970, ATA 186) and I need to buy firmware for them. I have contacted http://www.cdw.com and http://www.insight.com/ but they didn't respond. Can anybody tell me where can I buy SCCP and SIP firmware for my phones? BTW, I'm in Croatia (Hrvatska). I heard that location does matter. P.S. My local Cisco reseller wants to sell me

When a call is placed out the Zap interface there is a long pause followed by an error message from the telco that the call can not be placed as dialed. We have a tdm2413e with 11 1FB (POTS) lines. The number being dialed is a working local number, all dialed numbers get the same error. What should we be looking for ? Best regards, Duane Pudenz Network Infrastructure Manager Shasta

Been around asterisk for two-plus years, but need a little input from the list on this topic. Have a potential client that wants to replace their old key system with *, but they want to integrate a commercial message service (they pay a monthly fee to have special MOH messages generated) into their system. The messages are essentially delivered to this customer via older generation audio

Am 13.10.2015 um 14:02 schrieb Renato Golin: > On 13 October 2015 at 12:37, Joachim Durchholz via llvm-dev >> Just curious: Do people ever do it the other way around? > > What do you mean? Report first, then try to resolve directly. My experience is that people try to resolve things directly and ask for help only when they find it doesn't work, but YMMV.

Hello List, I work for an IP communication provider in upstate NY as the engineer assisting our technical support team. We provide a number of different Telco systems to residential subscribers; and in an effort to more effectively trouble shoot termination problems I came up with the idea of creating a click to call system that will allow our agents to effortlessly place test calls. On a

Thanks. I have gone that route and there was no response. What constitutes 'particularly urgent'? In regards to D30107<https://reviews.llvm.org/D30107> it some fairly obvious defect(s) and there are a few bugs open in your database about the issue, but it seems an area that doesn't get much interest (related to DynamicLibrary class). Thanks again.

On 01/24/17 19:00, Gordon Messmer wrote: > On 01/24/2017 02:14 PM, m.roth at 5-cent.us wrote: >> So, it installed happily. >> Then wouldn't boot. > > What did the storage configuration look like, exactly? I'd guess that you put > one partition on each disk, combined those in a RAID1 MD array, made than an > LVM physical volume, and then created filesystems and

Ughs, I'm not dying to wait months...but if it thats the way it is, then its the way it is. Tends to be so many commits in a day it seemed it was being lost in the noise/clique. I did try to add some notes to the bug tracker, but new logins are disabled, and the email to get one never replied...but I guess that's another topic! Thanks again, definitely alleviated some frustrations.