similar to: Using Speex Echo Canceller

Hi Anton Thanks for the info... What if I use this function do I still need to sync the playback and capture? Assuming that the captured voice (*rec) already contains the echo which I need to cancel out... -------------------------------- void speex_echo_capture (SpeexEchoState *st, const spx_int16_t *rec, spx_int16_t *out) Parameters: st Echo canceller state rec signal

Hi So in your case if you don't want to use speex_echo_cancellation than you should do next way: Save the playback frames (clean echo) within separate playback thread with speex_echo_playback func. Then use speex_echo_capture - it will remove the clean echo frame (saved with speex_echo_playback func) from const spx_int16_t *rec buffer (saved with speex_echo_capture) and you will get

As for me - speex_echo_cancellation is a better choise. Try using it in capture thread instead of those speex_echo_capture and speex_echo_playback functions. And please, describe your problem in details. Cause the fact that you "didn get echo cancellation" doesn't mean you are doing smth wrong. Regards, Anton A. Shpakovsky -----Original Message----- From: speex-dev-bounces at

Hi Yes, it's absolutely unnecessary to use speex codec. You can encode the echo cancelled auido data with any codec you want. The Echo Canncelation API is here - http://www.speex.org/docs/api/speex-api-reference/group__SpeexEchoState. html I would advice you to look at speex_echo_cancellation function but you will have to sync playback and capture streams by yourself. I've used

> Message: 1 > Date: Thu, 15 Jul 2010 00:19:43 -0600 > From: devi at purpletalk.com > Subject: [Speex-dev] Speex Echo Cancellation > To: speex-dev at xiph.org > Message-ID: <20100715001943.pr04hvtxsc8k04so at mail.purpletalk.com> > Content-Type: text/plain; charset=ISO-8859-1; DelSp="Yes"; > format="flowed" > > Hi > > I am using speex

Well, I'm not a professional in AEC theory, but what I've mentioned is: speex_echo_state_init(20, 320*10) - frame size should correspond to 20ms. At your sampling rate (16000hz) is should be 16K*0.02 = 320. The same I can notice about echo tail. 100ms: 16000*0.3 = 4800, not 3200 as you has. But that's not crucial I think. Just wanna you get the point. "Internally,

Anton A. Shpakovsky <saa <at> tomsksoft.com> writes: > > As for me - speex_echo_cancellation is a better choise. Try using it in > capture thread instead > of those speex_echo_capture and speex_echo_playback functions. > > And please, describe your problem in details. Cause the fact that you > "didn get echo cancellation" > doesn't mean you are

Hi Jean Marc, We are running the speex echo canceller code on a Windows Mobile smartphone using a TI OMAP 201MHz 850. We are making voip calls and audio is working without echo canceller code. Simply adding the following 2 functions whether the echo cancellation is wired in (ie we use the output frame ) or not performance becomes terrible. Note 2 separate threads are used to handle audio.

Hello guys, I want to make echo tail parameter in my app changeable during run-time. So my question is:f Should I use speex_echo_state_reset function for this? Just call speex_echo_state_init function with new values after that? Or perform a full de-initialization and initialize echo cancellation with new tail value? I'm also using preprocessor - does the same apply to it?

2006/11/2, Jean-Marc Valin <jean-marc.valin@usherbrooke.ca>: > > Today I tried speex echo cancellation on my VoIP application running > > on a windows mobile based PDA (OMAP1510 168MHz). The result is > > disappointing: it takes 150-250 ms to do echo cancellation (by calling > > speex_echo_capture() ) for a 20 ms frame! > > Are you by any chance using an insane

Hello, We are experiencing a few problems with Speex AEC. We are using it to process audio data on a real time stream over IP with Speex codec (frame size = 320). We initialize the echo state like this : SpeexEchoState * echo_state; echo_state = speex_echo_state_init(320,512); int sr = 16000; speex_echo_ctl(echo_state, SPEEX_ECHO_SET_SAMPLING_RATE,&sr); We are not really sure about

Hello, I've just caught a strange crash in speex_echo_state_init routine. It happened only on one WinXP machine, while on others using XP, Vista and 7 everything is fine. Crash occures in mdf.c line 434: st->spec_average = DIV32_16(SHL32(EXTEND32(st->frame_size), 15), st->sampling_rate); Got any ideas or should I provide more information of the OS? Thanks a lot!

Oh I overlooked that one.. Thanks Darren! Btw, I was wondering if anyone has tried using the echo canceller function of speex with other codec like g.711? On Tue, Jan 17, 2012 at 8:32 PM, Darren Longhorn < darren.longhorn at redembedded.com> wrote: > On 14/01/12 12:26, Christopher Adoremos wrote: > > What is the highest quality audio data rate and sample rate Speex can >

Hi, I've attached a patch against SVN r14645 which adds GCC visibility information to all symbols exported from libspeex.so and libspeexdsp.so. It includes a configure.ac change to test that both the compiler flags and __attribute__((visibility)) works, and if so will #define EXPORT __attribute__((visibility("default"))) and if not #define EXPORT I've attached a diff output

What is the highest quality audio data rate and sample rate Speex can support? -- Thanks <http://www.earnmailer.com/link/9e66612ae7944911> <http://www.earnmailer.com/alert/confirm/9e66612ae7944911> <http://www.earnmailer.com/> -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I've attached a patch against SVN r14645 which adds GCC visibility information to all symbols exported from libspeex.so and libspeexdsp.so. It includes a configure.ac change to test that both the compiler flags and __attribute__((visibility)) works, and if so will #define EXPORT __attribute__((visibility("default"))) and if not #define EXPORT I've attached a diff output

Hello, I would like to test the echo cancel algorithm available in unstable version 1.1.4. This echo canceller can be used with other codecs like G711? Somebody could send me some documentation or sample, or explain the next functions: SpeexEchoState *speex_echo_state_init(int frame_size, int filter_length); void speex_echo_state_destroy(SpeexEchoState *st); void

If more than one speaker receives the *same* signal, it doesn't matter the number of speakers. It only gets tricky when the speakers are playing slightly different signals (e.g. from a stereo song). Jean-Marc Quoting Greger Burman <greger at mobile-robotics.com>: > One thing I can think of is if you are using two or more speakers. If the > speakers are not at the exact same

Hello. I have the following situation. AEC is used in network chat software over DirectSound API. Echo and reference signals are almost aligned (delay is no more than 30ms). When echo is emulated in notebook (built-in speakers + mic) everything goes fine and echo is cancelled. But when configuration includes stand-alone speakers and mic no echo is removed. Audio is in 22050 hz at 16 bit

Hi Folks, I am having trouble using speex_echo_cancel. As a starting point, I am using the testecho.c source code. I compiled the 1.2beta1 version. I have not tried any other versions of speex. The document says that the order of arguments to Speex_echo_cancel is (echo_state, input_frame, echo_frame, output_frame, residue) where "input_frame" is as captured from mic and