similar to: Centos 4 on Terminator C3

Hi, I have an Asus terminator C3 with 512Mb. It has a Via P3-800Mhz CPU, with a VIA chipset. It's currently running FC6. I wanted to wipe the machine and install CentOS5. It boots from the CD to the linux prompt, then it fully loads vmlinux, then starts initrd.img, and somewhere at that point it reboots. I have tried: noapic, noapm, noprobe. Same, somewhere during initrd.img or at then

Anyone know a good distro for an Epia Mobo with the C3 chip? I have been trying to get Debian and Gentoo installed (new to me) and so far having little luck. Does anyone know a good install for this processor/mobo combo? Thanks Wiley -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, just a question: anyone has never installed g729 codec on VIA motherboard with C3 processor ? I'm having problem with IPP libraries, and Intel said that it works only on Inter processor. Any suggestion? Thanks Giordano -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have a very annoying problem that we hear on our end, but the other party doesn't hear. There are random beeps and echo type noises that occur. They are present during voicemails, and present on my end during calls. Is anyone experiencing the same deal? I have asked this a number of ways on the list, and never get a response... Thank you. Sean Garland Mount Shasta, CA

Been running rock solid servers on Centos 3 and 4 for years but equipment is starting to die so it is time. I was thinking along the lines of an Intel Q6600 on an Asus P5K-VM mobo with the new G33 chipset utilizing SATA. Is anyone having success with this board or any of the G33 chipsets where I am not going to run into all kinds of install problems? I see these other threads of install

Hi, As it has been brought to my attention (by several parties), my current MB does not support VT-d. Since I don''t feel like purchasing a brand new system, I have searched for replacement MB-s that would fit into my existing uATX case, support my C2D CPU, and support at least 4x2GB ram. I have narrowed it down to the following four models: SUPERMICRO MBD-C2SBM-Q-O (Q35 chipset)

I''ve currently got a Xen 2 system running on a CL10000 VIA system. I''d like to upgrade to Xen 3 and make use of the hardware virtualization support in Xen (sometimes). My requirements then: 1) Cheap CPU. AMD or Intel. Must have Xen3 hardware VM support. Any speed. 2) Lower power consumption from the CPU 3) Cheap mobo to support the chip. 4) Decent raid-1 SATA support on the

Hi All, I have a Linux box (P3-800MHz/196MB RAM/10GB+320GB) running Samba 3.0.22 server and a Windows XP (P3-800MHz/512MB RAM/200GB) client. The transfer speed (both ways) is about 5-7 MB/s when file is smaller than 700MB. For larger files there is a difference: when the Win client writes a file on the small Linux disk (10GB) the speed is as above. But when I copy, let's say, a 1.5GB file

Hi! We (an astronomical center) are building a small cluster for our number-crunching. The problem is that we have 12 mobos A7V600 by Asus (for athlons) - 1 server + 11 diskless nodes. And here comes the trouble... hardware: mobo: a7v600 net: 1 gigabit by 3com - 3c940, integrated in mobo the problem is: dhcp - works fine tftp - works fine pxelinux.0 - downloads fine (I hope) linux kernel -

Hi list, i have seen a lot of questions about VT-d on recent intel mobos. however, it seems that all tests are done on the newer socket 775-based xeon''s or core2''s, and not the 5000 series (socket 771 based). i was planning on getting a intel S5000V chipset, but found out that it does not support VT-d. Can anyone confirm a mobo that has this enabled and also has 2x LGA771

We have 4 systems supported by ASUS M2V mobos with AMD2 cpus on board. No we haven't gotten CentOS of any flavor to work yet. Yes, we did load Fedora Core 6 and it worked, with respect to the SATA driver only. There is a RAID, Audio and LAN driver for Linux that comes on the M2V mobo CD. The audio driver installs and works fine on FC6. I've read many of the messages with respect to

After contacting Asus, MSI and Gigabyte, this is what I got back. Only motherboards with the QXX chipsets and certified with the Intel VPro support the Vt-d virtualization technology. I''m not sure about MSI though, because this is what I got from their support: "Almost board could support. Please refer to our website, http://www.msi.com/product/mb/." The problem is that

I just fetched today's cvs (1/30/04 11:10:31). Compiles/installs on my test machine (ASUS A7V, 900 MHZ). However, If I try to compile on my production machine (Elite K7S5A, 2.4GHz, 512MB) while * is running the zaptel and asterisk compiles seg fault. I am assuming that they will compile correctly if I bring down * and rmmod the zaptel driver. 0.7.1 compiled and is now running. Is there

Hello all, I just been wasting time with an Asus mobo trying to get CentOS/RHEL up and running for my home lab using Xen Technologies and need an advice in order to have a fully working Box, got any suggestions? which chipsets are the best out of the box for Centos AMD platform (AMD based, nVidia based, Ati Based)? (this could be a plus) I already have the AMD Athlon 64 X2 4800+ Processor AM2

Hi people. I had finally cross my USB to my DomU windows XP, justs 1 issue: USB 2.0 not working only 1.1 is working. I would to confirm with others that have the MoBo ASUS M4A89TD Pro/USB3 if u have been able to passthrough the USB ports to HVM windows? I had try different settings on my BIOS, different settings on Xen 4.1, this under Centos x64 AMD Athlon II 640. I receive the

Here is what I've ordered for the new system: Case: Antec TX1050B, Mid-Tower Server Case MoBo: Intel D945GCL CPU: Intel Pentium-4 631 RAM: Aeneon 512 Mb 240-pin DDR2 SDRAM DIMM - DDR2 667 Disk: Hitachi 80 Gb SATA 3G Carrier: Vantec MRK-200ST-BK DVD: got one on the shelf I'm going to try Floppy: Sony MPF920-Z-121 My intention is to load CentOS-4 complete and use the

I have a P3-800 with two IDE drives in a software RAID1 configuration. Each drive is on a separate IDE channel. Now anytime there is HD activity, I hear "beeps" and "cutting out" on a call using the X100P card. I ran the zttest program, and discovered HD activity would drop the accuracy down to between 2% and 50%. However I noticed if I disabled one drive in the RAID1

I have 2 new boxes that I cannot use yet because of problems supporting these newer chipsets in 5.1. Does anyone know when the CD version of 5.0 x86-64 that has support for these chipsets be available on any on a Centos mirror? Has the support for these chipsets been added to yum yet? Here are my latest results with these chipsets and Centos 5.1 1. Asus P5K, E6850, P35 Chipset: Does not

I have a brand new ASUS MB model M2N-MX which is giving me issues when installing Centos 4.4 64 bit I initially had problems with finding the SATA drives but I resolved that issue by simply selecting the NVIDIA SATA (sata_nv)driver from the list of drivers during the initial install. The install seemed to go fine after that as the installer uses the Generic VESA video driver during the install,

Hi. I got a asus SABERTOOTH 990FX, reading about vt-d, I read the MoBo that support IOMMU and there was chip 990FX, them I pick this MoBo, the BIOS that came with the board was 0402 05/11. I follow the xen wiki, I''m running Xen 4.1.1 from Gitco on Centos 5.7 x64, by default the MoBo have the IOMMU disable, I enable the feature IOMMU = 64MB, save the bios settings, restart, turn off