similar to: smbd fails to start after upgrade to version 4.11.6

Hai Roy, Thanks for verifing it all. Im still amazed with this one. It all looks good to me, exept the missing PTR records then.. ;-) Ok last question here to both, now i have Raspbian and Debian Buster amhf on the repo. Rowland and Roy your both running Raspbian Buster correct? Its so strange Rowland his pi is running correct and Roy not. There has to be a different. Im rulling out

Greetings all; Does nut build on an r-pi4b? I have an r-pi4b running one of my cnc machines and the power bump performance due to the size of its psu and the fairly rapid start time of my standby generator, does not allow a full powerdown restart to take place, leaving the pi in a crashed state. I've purchased a factory refurbed cyberpower ups rated at 650 WA which I intend to figure

Hi Louis, > Hai Roy, > > Thanks for verifing it all. Im still amazed with this one. > It all looks good to me, exept the missing PTR records then.. ;-) > > Ok last question here to both, now i have Raspbian and Debian Buster amhf on the repo. > Rowland and Roy your both running Raspbian Buster correct? > Its so strange Rowland his pi is running correct and Roy not. >

The output is: getent group 'domain admins? Copying without understanding what it does is not smart I know. But sometimes you will understand it later. And atm I am using a test setup. Here are is all the info you need: Main AD: Collected config --- 2020-09-05-18:16 ----------- Hostname: gaia DNS Domain: rompen.local FQDN: gaia.rompen.local ipaddress: 192.168.88.2 -----------

Hai, Both script where missing "run as root". I've update the github versions. Can you run that these again, but as root or with sudo. And post the content again. Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > Ji??í Knotek via samba > Verzonden: woensdag 13 december 2017 11:36 > Aan: samba

I got it. Thanks. The share is working. Only problem, I need some files to be only readable for the end user (templates) the problem is windows doesn't for some reason allow me to change the rights. I am using dutch windows so the error is dutch but translated it say. Can't connect/find active directory to verify or open claimtypes. Philip "Rowland penny via samba" <samba at

What I am aware of I didn?t mess with the bidmap config. But I don?t really understand what it is, and where I use it for. I am really new to samba. All I know is that I have something regarding this in my config. And that it has something to do with users and groups. Thanks a lot btw for all the help. Without it I would be stuck on things like this for weeks Philip > On 4 Sep 2020, at 18:57,

On 05/02/2020 10:33, L.P.H. van Belle via samba wrote: > >> I didn't bother checking, I can cause the panic just by editing >> smb.conf, adding the two lines in question and then >> restarting Samba. I >> do this over SSH, so presumably the network is up on eth0 ;-) > Ah, ok, so we clearly have bug in samba??? > But i dont see this one on Debian Buster

Hai Roy, I had a good look and most look ok, not much exiting going on but still a few points. >From teh logs. Feb 5 08:41:48 pi4b ifup[303]: ifup: couldn't open interfaces file "/etc/network/interfaces": No such file or directory So re-create the file with the folling content, : /etc/network/interfaces And add : # This file describes the network interfaces available on

Hello Rowland,     thank you for advice. I reconfigure both AC-DCs again with new data and send updated data. Unfortunately, the result is the same. I'm also sending a listing from samba-setup-checkup.sh.  * Linux: Raspbian, debian stretch lite  * Samba version 4.5.12-Debian  * DNS: BIND9_DLZ 9.10.x  * Installed packages: ntp ntpdate samba smbclient winbind libcups2 samba-common

On some cpu's optimized chacha implementation in openssl (1.1.0+) is notably faster (and on others it is just faster) than generic C implementation in openssh. Sadly, openssl's chacha20-poly1305 (EVP_chacha20_poly1305) uses different scheme (with padding/etc - see rfc8439) and it looks it is not possible to use in openssh. OpenSSL 1.1.1+ also exports "raw" poly1305 primitive,

Hai, If updated the buster-samba411 for amd64/i386 and NEW armhf support is added. Debian Buster samba 4.11.2 Repo info : https://apt.van-belle.nl/ Buildlogs are also coming online, you can find these here for samba 4.11.2 http://downloads.van-belle.nl/samba4/Buildlogs/buster/ Next inline for the 4.11.2 packages, Ubuntu Bionic (amd64/i386). The build process for these has started

Came across this in the process of troubleshooting: https://alioth-lists.debian.net/pipermail/nut-upsuser/2011-November/007249.html My whole reason for compiling from source is to add SSL support (as it doesn't seem available through the package manager). Apt list shows these installed: libusb-1.0-0-dev/stable,now 2:1.0.22-2 armhf [installed] libusb-1.0-0/stable,now 2:1.0.22-2 armhf

On Fri, 2019-07-12 at 15:54 +1000, Damien Miller wrote: > On Thu, 17 Jan 2019, Yuriy M. Kaminskiy wrote: > > > On some cpu's optimized chacha implementation in openssl (1.1.0+) > > is > > notably faster (and on others it is just faster) than generic C > > implementation in openssh. > > > > Sadly, openssl's chacha20-poly1305

Hai, My plan was to release the all of the coming builds of 4.11.1 today.. But... There are still processes building.. So whats new, what is there and what is not there. The 4.11.1 is based on the Debian Testing 4.11.0. My changes. * d/control changes: - Package samba, added acl to Recommends, obligated for member and AD-DC's. - re-enabled trackers to allow spotlight to

On Jul 13, 2014, at 9:46 AM, pere at riusnebot.com wrote: > Dear Charles Lepple, > Sorry for my email intrusion. for next time: http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser > I have an UPS called Ovislink 1000VA and it use a UPSMART2000R (with ?ATCL FOR UPS?). > I?m a beginner Linux user and I ?will install your new driver <nutdrv_atcl_usb > to work

On my raspbian buster RPi3's that run nut, no problems with the stock nut packages provided so I wouldn't expect problems with your RPi4 once you get the cable and configs sorted out. I use the RPi3's as nut-servers to monitor and manage my Tripp-Lite UPS systems, the other local systems run nut-client and communicate with the RPi. --Larry On Tue, Jan 7, 2020 at 6:28 AM Gene Heskett

Dear Charles, Thanks for your quick reply, but I can't install nut_2.7.2 in my raspberry. 1) I create a [nut] directory and use wget to download three files: [nut_2.7.2-1.dsc] [nut_2.7.2.orig.tar.gz] [nut_2.7.2-1.debian.tar.xz] 2)I unpack: dpkg-source -x nut_2.7.2-1.dsc 3) I use command root at pi1:/nut/nut-2.7.2# debuild -us -uc . .. And I have the following error code:

Hai, ? Sorry for the Delay, bit overloaded with work, but the end is near. pff, finaly.. soon i take a long vacation.. ? Well, you know the drill.. Ubuntu 20.04 focal, is next. ? For the Raspbian guys, please try how the buster-samba412 works for you and let me know the results. Rapsbian will be last to build so if you in a need for the newer versions, use/try ?buster-samba412? !! and dont

Hi I am trying to authenticate my mail server with samba ad. The only problem is that I don?t get it working. root at dna:/data/CA/EasyRSA-v3.0.6# ldapsearch -x -h gaia.rompen.lokaal -D 'vmail' -W -b 'cn=users,dc=rompen,dc=lokaal' Enter LDAP Password: ldap_bind: Strong(er) authentication required (8) additional info: BindSimple: Transport encryption required. I can not read