similar to: Samba 4.7 package-aware print driver

Hello, I am trying to install the driver on my print server. I used https://wiki.samba.org/index.php/Setting_up_Automatic_Printer_Driver_Downloads_for_Windows_Clients as a guide. I tried to install - KX driver, 32 and/or 64 bit - KX-XPS driver, 32 and/or 64 bit - Of both drivers the 64bit variants the installed driver package from system32 directory With all drivers I get the message

Hi I am still in my begining steps with linux and samba. my system is 100MHz 128MB 4GB OS is RH 9.0 every time I tried to access my samba server called (linux) from my windows 2000 pro it gave me " the network path was not found " I can ping it and telnet to it no prob I ran testparm and the result 'll be below- I 'm waiting for your help guys ( I tried to clear the log as much

Hello samba team ! I have configured a samba4 printer with CUPS as backend. And I have enabled the "load printers = yes" option in smb.conf. Nearly everything works well ! -> Samba detect the CUPS printers -> The printers appear automatically in the "printers" share -> On windows 7 I can add the server the printmanagement.msc and I see the printers -> I can upload

Hi list, I just set up a print server using Samba 4 as a domain member. I successfully uploaded drivers to the server (through printmanagement.msc). A test machine has been able to print through the server but I'm unable to access preference page of the printer in printmanagement.msc (preference page is fine on client). RSAT keep saying that the driver isn't installed, installs it and

Hai, A few basic steps to setup a dedicated print server with samba 4 and cups. I used debian Jessie in this case with sernet samba 4.2.3 I had some problems with 4.1.17 on debian, messed up some printernames after driver uploads when i corrected them after. My steps. 1) Install a normal samba4 member server. 2) setup your printers in cups and let them print to the 9100 port. Send a

>>>> -----Oorspronkelijk bericht----- >>>> Van: samba [mailto:samba-bounces at lists.samba.org] Namens Prunk Dump >>>> Verzonden: vrijdag 4 september 2015 11:15 >>>> Aan: samba at lists.samba.org >>>> Onderwerp: [Samba] Cups printers autoloading and windows drivers >>>> >>>> Hello samba team ! >>>>

First of all, I forgot to mention, that I have Debian 9 with standard Samba 4.5. Modifying the oemsetup.inf should not be neccessary as I have set the os_major/minor to 6/0. The generic driver which comes with Windows is a Type 4 which should not be supported by samba as far as I read. I tried the van-belle driver. Same situation. I have found samba 4.8 for stretch at http://apt.van-belle.nl.

> -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens Prunk Dump > Verzonden: zondag 6 september 2015 11:02 > Aan: samba at lists.samba.org > Onderwerp: Re: [Samba] Cups printers autoloading and windows drivers > > >>>> -----Oorspronkelijk bericht----- > >>>> Van: samba [mailto:samba-bounces at

Hai, Sorry for the slow reaction here. I was few days out of the office. But can you try the universal 2 driver. That one works fine for me. And if you send me the exact driver your trying to me, i'll test that one in my setup. Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens Manu > Baylac via samba >

Hi all, i get struck with nearly the same problem as here : https://lists.samba.org/archive/samba/2016-December/205088.html excepted the NT_ error. And the thread ends suddenly without solution. And i tested all that Louis and Rowland proposed. Printer server as domain member but here with rid backend. Debian stretch : samba 4.5.12 (debian package), also tested with 4.6.7 and 4.6.8 (Louis

Hi list, i have a samba member-server in a samba4-AD with cups. cups works fine, i can print the testpage from cups and from a windowsclient. but, i am not able to upload a printer driver to a samba4 print-server: i followed this howto: https://wiki.samba.org/index.php/Configuring_Point%27n%27Print_automatic_printer_driver_deployment in printmanagement.msc i can add the server, and i can see

Hai,   I suggest start with. 1) backup you smb.conf 2) cleanup your smb.conf   About the "access is denied". Which brother printer is it ? you didnt tell us that. Which printer driver,please post a link.   Did you set the SePrivileges? Did you configure the share with "POSIX" or WINDOWS rights. ?   And in the folder /srv/samba/Printer_drivers/ make this

Looks like this phone has redirection or DND set. Anything on the display? If it still a mystery send us the settings of the phone, then it should become clear. BTW if you have a snom trouble ticket, you can also go to http://www.snom.com/onlinesupport.html (scroll down to set up an account). CS > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com >

Hey there, today I've ridden about HEIST.

The other day I asked how to solve the problem where my NT domain username is <PHILIPH> and my samba username is <philip>. Several replied indicating the "username map" option in smb.conf (can't believe I missed it). Anyway, by adding the following line to smb.conf: usrname map = /path/to/username.map.file and then adding the following line to the above referenced

(and sys::cas_flag that STATISTIC uses is a uint32 ...) On Thu, Aug 25, 2016 at 9:54 AM, Daniel Berlin <dberlin at dberlin.org> wrote: > Okay, dumb question: > Are you really getting negative numbers in the second column? > > 526,766 -136 mem2reg # PHI nodes inserted > > http://llvm.org/docs/doxygen/html/PromoteMemoryToRegister_8cpp_source.html >

Hello all, I've run into an issue while migrating a client's Samba PDC from Debian 3.x to OpenSuSE 10.3, have been beating my head against it for over a week, and am now turning to the mailing list for help. We're running Samba 3.0.26a-3-1478-SUSE-SL10.3 authenticating against OpenLDAP 2.3.37. Integration of Samba and OpenLDAP works, and importing the 2000+ existing user accounts