similar to: subnet-down

On Tue, Mar 21, 2017 at 06:51:37PM +0100, albi at life.de wrote: > We run tinc in router mode on over 10 server. > Some server announce the same subnet. > I can add routing with subnet-up and remove routing with subnet-down. But if I do this, my routing will be removed when > only one anncounce comes in, even there is an other server who still has the routing to the same network. >

Hi, is it possible to run two tinc hosts to make failover in case of crash of one tinc host? Or should I switch to tinc 1.1? ALBI...

Hi, I have two tinc nodes which announce default gate to internet. How does tinc select which node is prefered when I route to the tinc device and not a special ip? tinc 1.0.16 ALBI...

>> The setup looks like this: >> web <- tinc "tiosp" -> gateway <- tinc "tiutl" -> backup Which lan ips do all your computers have? network addess will be fine. ALBI...

> I'm using something similar to Amazon's VPCs, where a logical group of > instances has a local subnet from the cloud provider. This local subnet > is always 10.0.0.0/24. As there are multiple VPC's, these private local > subnets dont collide. I do not know what Amazon does, and it looks like I do not want to know it :-) Am I correct? web, gateway and backup have NO

Hi, Am Wed, 22 Mar 2017 07:51:23 +0100 schrieb Guus Sliepen <guus at tinc-vpn.org>: > [..] > 1. Use different weights for the otherwise identical Subnets, and ensure > you pass that along to the route up/down commands so the kernel can also > distinguish them. in linux the following command within "subnet-up" accomplishes that behaviour: ip route add

I use 3 Ubuntu server 14.04 as KVM guest. Now I run 5 tinc vpns in switch mode. I use the same key for every vpn. Every kvm has connect to the two other servers. I need 5 vpns to have 5 networks connected but seperated. 1 vpn was running fine, but now that I run 5 vpns, my kvm crashes sometimes. Especially when I stop tinc. I used tinc 1.0.26 from repo. Now I tried tinc 1.1 pre, same problem but

Hello, I just tried tinc for win the first time. I use tinc on linux computer for some time already. Now I get the following error: Dec 18 14:57:39 narnia tinc.life[10884]: Connection from 217.187.51.119 port 35059 Dec 18 14:57:39 narnia tinc.life[10884]: Connection with mwflapar1 (217.187.51.119 port 35059) activated Dec 18 14:57:44 narnia tinc.life[10884]: Received UDP packet from unknown

> If your question is "can I assign the same subnet to multiple tinc > nodes on the same network", the answer is yes (for both 1.0 and 1.1). Yes exactly. > currently it tries to estimate which one is closest by measuring the > time it took to establish metaconnections along the edges to the node, Shure? I remember alphabetic order (host name) in tinc 1.0. Is it the same

Hi, is it possible to use tinc via https proxy? I mean tell tinc to connect via https proxy to my tinc server. I heared openvpn can do this. Can tinc do that the same way? ALBI...

I run multiple tinc networks and like to add some config which is the same in every network. Is there some sort of include for tinc.conf and hosts files? ALBI...

Hi, how does tinc decide where to route a packet? I know default weight is 10. Does tinc add all weights and choose the lowest? Will 3 hops with weight 10 prefered before one hop wih weight 50 ? ALBI...

Can I set mac addres of tinc interface in router mode? If yes, how? Thanks for any help. ALBI...

Hi, is there a tinc version for android? I hope so! ALBI...

Hello, did anybody already compile tinc for fritzbox routers? They are very famous in Germany and i like to run tinc on my fritzbox. Otherways maybe anybody can help me how I can do this. But I'm no good programmer... ALBI...

> homeClient<br> > Network Bridge: (local Area Network and TAP-Win32) 192.168.6.107 mask 255.255.255.0 gw 192.168.6.1<br> change -> mask 255.255.0.0 > Tinc.conf<br> > Name = homeClient<br> > ConnectTo = vpnoffice<br> > Mode=switch<br> Change -> Mode=router Why everybody wants switch??? Add -> TCPonly=yes > vpnoffice: Network

> If you're using a TAP interface (i.e. layer 2, Ethernet) combined with router mode (an unusual setup, at least on > Linux), Thanks, DeviceType = tap does the job. > operating at layer 3, therefore tinc will strip any layer 2 header (including the MAC address) before sending the packet > across the VPN. As a result, changing the MAC address of the virtual interface will have

Hello, I have tried for days on end with no success on this, so I thought I would post it here and see if someone can help me at all. *Here's the scenario:* I have 1 PC with a Static IP/Domain (a dyndns.org account - myserver.homeip.net) connected to a router, which in turn is the gateway to the internet. It also has a static local IP (192.168.1.2). I will call this the "server"

Many thanks for the help to date. I now have a working vpn with three nodes: 10.20.30.1 10.20.40.1 10.20.50.1 Each machine can see each other machine 100's of miles apart from each other. Each machine is behind its own router. The machines are on their own subnets, as well, of course. The individual IP's on the lans of the nodes are: 192.168.0.155 (corresponds to 10.20.30.1)

Hello, I am having an issue with getting tinc to route the packets between 2 Windows tinc installations. Here is what I have so far: homeClient: Physical Interface: 192.168.6.50 gateway 192.168.6.102 homeClient: Tap-Win32 192.168.10.23 no gateway homeClient file: Address:192.168.6.50 Subnet=192.168.10.0/24 vpnoffice: Physical Interface 192.168.6.102 gateway 192.168.6.1 vpnoffice: Tap-Win32