similar to: CentOS 4.4 not seeing all RAM

I've done quite a bit of looking, but I haven't found an answer that answers this question. Environment: cygwin on Windows rsync 3.0.4 I know that rsync isn't optimzed for speed on local copies - that's clear in my testing. I'm attemting to sync a large volume of files. (In this case, I'm syncing a rdiff-backup set...) An initial sync will be about one fourth as fast a

Hi folks, an Asterisk (www.asterisk.org) box will be built with the following specs and I wanted to know if CENTOS has a built process/config/parameter/special distro to target the AMD Opteron Dual Core plataform: 2 amd opteron 265 dual core 1.8 Ghz 2mb l2 cache 2x1024 ocz c2-6400 dual channel gold GX XTC 2 Seagate 16mb cache 300 GB barracuda 7200 drives another 2 Seagate 500 GB 16mb cache

I tried updating the BIOS on my K8WE (S2895) yesterday to 1.03, but after the update, FreeBSD (RELENG_6 dated March 26) would randomly freeze after booting. As I was updating from v1.01, I suspect it may be the updates to the nVidia SATA firmware that caused the issue, as things generally froze shortly after the background fsck processed kicked in (with, obviously, the exception of the first

My setup is as follows: Motherboard: Tyan S2895 CPU: Two Opteron 275s Memory: 4 GB Disk: Three 250 GB SATA drives attached to a 3Ware 9500S-4LP RAID card Video: Nvidia GeForce 7800 The only hardware that I have added to the motherboard is the 3Ware card and the Nvidia card. The disks are configured as a RAID 5 array, and the machine boots from this array. I installed CentOS 4.2 x86 on this

I've had a consistent problem with Samba from 2.2.1 onwards, maybe even before then, I'm not sure when it started. Anyway, Samba will randomly stop responding to any requests, although it usually occurs after transfering large amounts of data (1 GB+). To get around the problem, I've been restarting samba every night, but we still have the problem occasionally. smbclient shows:

Good day. Thanks in advance for any help. I have a Tyan S2895 (Thunder K8WE) with 2 275 Opterons and the latest (1.02) bios. It appears to have an nVidia nForce SATA chipset which connects to a 250gb WD Caviar SATA drive. Using the CentOS 4 update 2 x86_64 DVD, the install is peachy until half-way through the "performing post install configuration" bit. Then it hangs forever. I

I am trying to get XDMCP working over SSH on CentOS 4.4 from a windoze box running Cygwin/Putty I have set Enable=true in /etc/X11/gdm/gdm.conf restarted the X server, logged in with Putty and X11 forwarding enabled. I then try to start the Xserver with the following commands # gdmXnestchooser localhost or # Xnest :1 -query localhost Both commands will successfully display a X window and show

Hello everyone, As part of my quest to add TLS relocation support to MCJIT, I've been taking a closer look at the GOT implementation in RuntimeDyldELF and I believe that is not valid as currently implemented. In particular, I am wondering about the multiple GOT handling support introduced in r192020. If I understand correctly this can make code reuse the GOT table entry in a different object

I've been checking out this and like the looks of it. http://www.tyan.com/products/html/gt24b2891.html I was told the onboard SATA RAID controller can only be used by windows. However, others have told me that there is no problem using it with linux. Anyone used the Tyan Transport GT24 (TYAN Thunder K8SRE s2891 motherboard)? Good choice for a CentOS server? Thanks, Josh

I'm getting a couple of systems that are arriving with the new 3ware 9550sx controller. Does anyone know when this will be natively supported by CentOS? Has anyone built an RPM of the driver/module for this new controller?

I've been planning to build a dual Opteron server for awhile. I'd like to get people's suggestions on a suitable motherboard. I've looked at the Tyan K8SE (S2892) and K8SRE (S2891) but would like to find more Linux-specific experiences with these boards. Some features I expect are at least 4 SATA (SATA-300?) ports, serial console support in the BIOS, USB 2.0 and IEEE-1394

I am trying to install CentOS to a server that has a Tyan S2891 motherboard, 2 Opteron 875 Dual Cores and 2GB of RAM. I have been able trying to install over a network but the tg3 driver will not load. I then installed from a DVD and on rebooting after the installation I cannot get the network drivers to load and the RAID controller in the PCI slot is not available. It seems that when I do an

Has anyone installed Linux (CentOS or other) on a Tyan K8SE (S2892) motherboard? I'd really like to hear your experiences -- with this board or Nvidia's nForce Pro chipset in general. I'm looking to build a new server using this board but would like to find some other experiences first. I've googled myself blue but haven't found any reviews or postings regarding this

Folks- I have had a machine dropped in my lap that I am trying to get CentOS 4.1 to run on as a first pass (the hope is for it to eventually run Rocks -- http://www.rocksclusters.org , which uses CentOS 4.x as its underlying OS). The machine has 2 Opteron 250DP (2.4GHz) with 4 GB of RAM. It is using a Tyan Thunder K8WE (S2895A2NRF) motherboard with an nVidia nForce chipset --

Dear Friends, I am trying to install a few packages in R and am receiving error messages. Since the error messages are different, I am posting them separately. The second error is with the installation of lpSolve. The core error message is: ======================================================================== In file included from /usr/include/bits/posix1_lim.h:153, from

I tried to test Asterisk 1.4 on FC6 x86_64. I have it working on FC5 x86_64 very good, but since FC keeps updating, I tried to follow newer kernel versions. I can't pass the zaptel compilation. Everything is OK, but when I finished, and tried to load it, allways got module not found when I run modprobe zaptel, and modprobe ztdummy. I already tried to modify is with the sed 1 option but

It seems that unstable PowerNow support on the Tyan S2895 is not limited to Linux according to this review: http://www.hardcoreware.net/reviews/review-296-1.htm Their solution was to upgrade the BIOS as well. -- Bryan J. Smith b.j.smith at ieee.org http://thebs413.blogspot.com ---------------------------------------------------------------------- The best things in life are NOT

Hi, I am facing problem in sync time within DomU with Dom0. After gone through mailing lists, I have set /proc/sys/xen/independent_wallclock to 0. But still DomU are not syncing their time :-S Machine using kernel-xen-2.6.19-1.2911.fc6 xen-3.0.3-3.fc6 xen-libs-3.0.3-3.fc6 Please advice to solve this weird problem, Thanks _______________________________________________ Xen-users mailing list

Hi Everyone, I have dovecot, postfix, roundcube and piegeonhole managesieve all working nicely together. Personal scripts defined in roundcube run without issue. I have configured the global sieve dir defined in 90-sieve.conf: sieve_global_dir = /var/lib/dovecot/sieve/global/ I pre-compiled the script in there: # ls -l /var/lib/dovecot/sieve/global/ total 8 -rw-r--r--. 1 root root 118 Sep 19

Hi Everyone, I'm currently using dovecot SASL in postfix and passwd-file in dovecot for authenticating my users. I want to switch to using IPA instead. I have both the postfix (mailman01) and dovecot (mailman02) servers joined to the IPA domain. I have GSSAPI working in dovecot for IMAP. But, the SASL GSSAPI authentication in postfix fails with this error: warning: unknown[10.200.5.100]: