similar to: delay in establishing network connectivity

hello, I would like to download the live iso of latest centos 7.4-1708 (desktop flavor does not matter) I looked here and pages underneath it.... https://www.centos.org/download/ but I am not finding it. is there any other place I need to look at or may be it's just a matter of time and it will show up later on centos.org site when it's availability? thank you, F-

hello, some users' login fails since they type upper case for their user ids ,etc ... how can case sensitivity be disabled so they can login with mix of upper and lower case? this is what i tried: in /etc/sssd/sssd.conf i tested this below [domain/default] case_sensitive = false i stopped sssd, deleted all inside /var/sss/db and started sssd but that did not help .... thank you,

CentOS 4.1/bind-9.2.4-2. I have named serving as a cache DNS server plus SOA for a local intranet zone. The problem I am encountering - over a period of time it stops responding to queries. nmap scan from a different host shows port 53 is visible. I can telnet to the port but all queries to server time out. So much so that "service named status" and "service named

I am running NUT as part of FreeNAS 9.2.0. I have looked through the manuals, but I don't see how to address my issue. The box has 4 NIC's in a LACP LAGG group. It takes a while for LACP to finish, and NUT tries to start before packets are flowing. NUT will complain endlessly about communication errors and never establish SNMP communication with my APC UPS. If I stop NUT and restart

2nd try... (with a few changes however...) Hellow Samba, Can anybody explain the following? I have two situations, one old and one new ;-) Old situation: - OS = win98 Samba = 2.2.??? (forgot, but this hasn't changed) Samba server visible in workgroup = NO Samba server connectable by name = YES (\\server\share) New situation: - OS = Win XP Samba = 2.2.??? (yep, still the same

On 03/08/2017 07:39 AM, John Hodrien wrote: > On Wed, 8 Mar 2017, Steve Clark wrote: > >> Yes it is really hard! >> >> ip address add 192.168.0.1/24 dev enp0s25 >> ip route add default via 192.168.0.254 dev enp0s25 >> echo nameserver 8.8.8.8 > /etc/resolv.conf >> echo nameserver 8.8.4.4 >> /etc/resolv.conf > This is still a deliberately trivial

hi ya On Tue, Jul 28, 2015 at 11:35:31PM -0400, Chris Ross wrote: > > > On Jul 28, 2015, at 21:52 , Steffan Cline <steffan at hldns.com> wrote: > > > > Ok, I think I have come a little further. > > > > When dovecot stops accepting connections, I checked netstat and found this: > > > > [root at hosting1 ~]# netstat -an | grep 993 > >

I'm looking at tuning up a new site and the bonding issue came up A google search reveals that the gluster docs (and Lindsay) recommend balance-alb bonding. However, "team"ing came up which I wasn't familiar with. Its already in RH6/7 and Ubuntu and their Github page implies its stable. The libteam.org people seem to feel their solution is more lightweight and it seems easy

Hi folks, I''m having (as the title suggests) a problem with zfs send/receive. Command line is like this : pfexec zfs send -Rp tank/tsm@snapshot | ssh remotehost pfexec zfs recv -v -F -d tank This works like a charm as long as the snapshot is small enough. When it gets too big (meaning somewhere between 17G and 900G), I get ssh errors (can''t read from remote host). I tried

My smb.conf looks like so. [global] security = ads realm = MIND.UNM.EDU workgroup = MIND idmap config * : backend = tdb idmap config * : range = 2000-7999 idmap config MIND:backend = ad idmap config MIND:schema_mode = rfc2307 idmap config MIND:range = 8000-9999999 idmap config MIND:unix_nss_info = yes winbind use default domain = yes restrict anonymous = 2 I have

> On Jul 28, 2015, at 21:52 , Steffan Cline <steffan at hldns.com> wrote: > > Ok, I think I have come a little further. > > When dovecot stops accepting connections, I checked netstat and found this: > > [root at hosting1 ~]# netstat -an | grep 993 > tcp 0 0 0.0.0.0:993 0.0.0.0:* LISTEN > tcp 0 0

On Wed, Apr 11, 2018 at 7:38 PM, Jose Sanchez <josesanc at carc.unm.edu> wrote: > Hi Karthik > > Looking at the information you have provided me, I would like to make sure > that I?m running the right commands. > > 1. gluster volume heal scratch info > If the count is non zero, trigger the heal and wait for heal info count to become zero. > 2. gluster volume

Hello We are trying to setup Gluster for our project/scratch storage HPC machine using a replicated mode with 2 nodes, 2 bricks each (14tb each). Our goal is to be able to have a replicated system between node 1 and 2 (A bricks) and add an additional 2 bricks (B bricks) from the 2 nodes. so we can have a total of 28tb replicated mode. Node 1 [ (Brick A) (Brick B) ] Node 2 [ (Brick A) (Brick

openssh 2.5.2p2 on Solaris 8 has PAM/cron problems. If I build it with PAM then cron quits working giving "cron audit problem." errors. If I turn PAM off then cron works but I get kicked out of any session where a password is needed (i.e. no .rhosts/.shosts or not using ssh-agent) with the message "Connection closed by IP#". I get through if I have a .rhosts/.shosts or use

pls could you include my name in the samba Digest mailing list, thanks Mark.

Hi, Please let us know what commands you ran so far and the output of the *gluster volume info* command. Thanks, Nithya On 9 January 2018 at 23:06, Jose Sanchez <josesanc at carc.unm.edu> wrote: > Hello > > We are trying to setup Gluster for our project/scratch storage HPC machine > using a replicated mode with 2 nodes, 2 bricks each (14tb each). > > Our goal is to be

Hello Karthik Im having trouble adding the two bricks back online. Any help is appreciated thanks when i try to add-brick command this is what i get [root at gluster01 ~]# gluster volume add-brick scratch gluster02ib:/gdata/brick2/scratch/ volume add-brick: failed: Pre Validation failed on gluster02ib. Brick: gluster02ib:/gdata/brick2/scratch not available. Brick may be containing or be

I''ve tried ssh blowfish and scp arcfour. both are CPU limited long before the 10g link is. I''vw also tried mbuffer, but I get broken pipe errors part way through the transfer. I''m open to ideas for faster ways to to either zfs send directly or through a compressed file of the zfs send output. For the moment I; zfs send > pigz scp arcfour the file gz file to the

Hi Nithya This is what i have so far, I have peer both cluster nodes together as replica, from node 1A and 1B , now when i tried to add it , i get the error that it is already part of a volume. when i run the cluster volume info , i see that has switch to distributed-replica. Thanks Jose [root at gluster01 ~]# gluster volume status Status of volume: scratch Gluster process

I found what I needed to do DOMAIN=MIND.UNM.EDU SHORT=MIND authconfig --enablekrb5 --krb5kdc=${DOMAIN} --krb5adminserver=${DOMAIN} --krb5realm=${DOMAIN} --enablewinbind --enablewinbindauth --smbsecurity=ads --smbrealm=${DOMAIN} --smbservers=${DOMAIN} --smbworkgroup=${SHORT} --winbindtemplatehomedir=/na/homes/%U --winbindtemplateshell=/bin/bash --enablemkhomedir --enablewinbindusedefaultdomain