similar to: Error at sdhci-pci, kernel

Hi I'm trying to access an SD-card using the built-in reader on a Lenovo T61 Laptop running CentOS 5.7. The unit is recognised by lspci: # lspci [ ... ] 15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 11) 15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host

Hi, I have a problem booting the Xen hypervisor on my brand new Lenovo Thinkpad T400 2765D2G (Core2 Duo P8600 CPU, 2.40GHz. 4GB RAM). I''m running Debian 5.0 (Lenny) and I use the Debian-provided xen-hypervisor-3.2-1-amd64 package. The Dom0 kernel seems to be the Xen patches ported to a 2.6.26 kernel: linux-image-2.6.26-1-xen-amd64 I can boot the hypervisor only very unrealiably: Out of

Package: xen-hypervisor-3.2-1-amd64 Version: 3.2.1-2 Severity: important The Xen hypervisor very unreliably boots on my 4GB Lenovo Thinkpad T400 2765D2G. Right after installation it booted the DomO kernel from linux-image-2.6.26-1-xen-amd64 without any problems, but every subsequent restart failed completely. Once I had a XEN "early fatal page fault" error message, on every other of

Hi there, I''m running Xen 3.2.1-rc1-pre on a Ubuntu 8.0.4 server (kernel 2.6.24-19-xen). I have some network cards which are passed through to the DomUs. ''Normally'' everything works quite well. but sometimes when a DomU crashes or has to be shutdown, the pci interrupt of that DomU gets disabled in Dom0. After that happend there is no way (at least I haven''t

CentOS Errata and Enhancement Advisory 2016:0479 Upstream details at : https://rhn.redhat.com/errata/RHEA-2016-0479.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e6d661ae130d63e2736f2a398b4c2ff082b805e54ac3487166307479a2be6e85 kmod-sdhci-0.1_rh1-1.el6_7.i686.rpm x86_64:

Hi all! After upgrading to Squeeze, I am watching a Xen VMHost that after a while it hangs. This did not happen when I was using Xen with Debian Lenny (in this case as with Squeeze, the Xen components are from Debian repositories). In each case I connected a keyboard and monitor to the computer and the screen remained black without answering any key. This problem seems to also affect domUs,

Hi, I have a system based on a Supermicro X8DTH-i motherboard and a Xeon E5506 CPU. It was previously running Debian lenny with xen-hypervisor-3.2-1-amd64 (3.2.1-2) / linux-image-2.6.26-2-xen-amd64 (2.6.26-29) without incident. I upgraded it to Debian squeeze, with xen-hypervisor-4.0-amd64 (4.0.1-4) / linux-image-2.6.32-5-xen-amd64 (2.6.32-45) and now it does not complete a boot of the dom0

Sorry for alI these individual emails, but I think is more readable this way, by having each independent information in a separate email. I also have these additional cards that I can try: Gefoce GT 1030 and Geforce GTX 1050 Ti. I have tried Geforce GT 1030 and it is working nicely but without hardware acceleration. Without the hardware acceleration I am able to get into X (Ubuntu Mate 17.10)

Hello, yesterday night I had a problem with my server located at a hoster (strato.de). I couldn't ssh to it and over the remote serial console I saw "out of memory" errors (sorry, don't have the text). Then I had reinstall CentOS 5.5/64 bit + all my setup (2h work), because I have a contract with a social network and they will shut down my little card game if it is not

Hello, I just upgraded from Xen-3.3.1 to Xen-4.0.0. System is Gentoo, Hardware is DualCore AMD Athlon, 8GB RAM. The kernel was upgraded from OpenSUSE 2.6.27.29-0.1.1 to Gentoo-2.6.32-xen- r1. The first boot failed with an OOM error during kernel/initrd load, so I adjusted the dom0_mem option and had to increase it''s avalue from 256M to at least 400M until the dom0 could boot. At all

Package: xen-hypervisor-3.2-1-amd64 Version: 3.2.1-2 Severity: normal After giving xen a shoot with the fresh lenny packages, an annoying bug comes up right after trying to boot into the new system. I'll provide further informations if needed. Please see serial debug output below and here http://plzk.de/xen-lenny (maxlines got extended for comfortable reading) XEN) Xen version 3.2-1

Does anybody please have any experience with the following CentOS 6 warnings in logwatch? WARNING: Kernel Errors Present ACPI Error (psargs-0359): [ ...: 1 Time(s) pci 0000:00:01.0: PCIe errors handled by OS. ...: 1 Time(s) pci 0000:00:1c.0: PCIe errors handled by OS. ...: 1 Time(s) pci 0000:00:1c.5: PCIe errors handled by OS. ...: 1 Time(s) pci 0000:00:1c.6: PCIe errors

Hi. While testing subvolumes in btrfs on 2.6.32.9, I hit a kernel BUG: [ 492.164012] kernel BUG at fs/btrfs/inode.c:4365! The commands to reproduce this bug are as follows: # mount -t btrfs /dev/sda5 /scratch # btrfsctl -S subvol /scratch # date > /scratch/date # ln /scratch/date /scratch/subvol/ ln segfaults, and the bug above is found in dmesg. Subsequent accesses to the subvolume

---------- Forwarded message --------- Od: Milan Bu?ka <milan.buska at gmail.com> Date: st 6. 5. 2020 v 16:15 Subject: Re: [Nouveau] GeForce(R) GT 710 1GB PCIE x 1 on arm64 To: Ilia Mirkin <imirkin at alum.mit.edu> Here is: # dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000100 [0x411fd073] [ 0.000000] Linux version 5.6.10-zotac (root at saux) (gcc version 9.3.0 (SAUX

Hi there, with the latest snapshot of linus tree, i see a stack trace and my system does not start X! Maybe someone finds this useful! (3.11 is working like a charm) BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) PGD 24eaa0067 PUD 24e7ac067 PMD 0 Oops: 0010 [#1] PREEMPT SMP Modules linked in: bnep snd_hda_codec_hdmi

Hi All, I am trying to get the pv_ops Xen dom0 kernel working with Xen 3.4 but with no success. I have been at this for 2 weeks now with different problems. Initially I could not get dom0 to boot when using LVM, so I reinstalled and didn''t use LVM. Now I am getting stack overran or currupted errors. Here is the boot log; From <IRQ 0> to the last line keeps on repeating until

Package: xen-hypervisor-4.4-amd64 Version: 4.4.1-9+deb8u1 Severity: important I already posted this on the xen-devel-mailinglist but no one seems to have an answer. I'm posting it here because perhaps someone using Debian and Virtualization might have an idea about this? Since Debian 8 I observe that live migrating a PVM on XEN 4.4.1 (also 4.5.1) and Linux Kernel 4.1.0 (also 3.18) requires

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-4 Severity: normal Tags: squeeze When the monitor is being restored from power saving mode via DPMS, X will lock up/restart. This only occurs when running Xen hypervisor. Running just 2.6.32-5 -xen-amd64 doesn't produce this effect. Note that both 2.6.32-5-xen-amd64 and 2.6.32-5-xen-amd64 with Xen 4.0.1 are running with nopat (to workaround

Package: xen-hypervisor-4.1-amd64 Version: 4.1.4-3 Severity: grave Justification: causes non-serious data loss -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash

Ok im trying to play Counter Strike 1.6, but it crashes when i join a server. The Video is set to OpenGL and when i set it to "Software" it started working (but the quality was really shitty so i want OpenGL). I have this video card VGA compatible controller [0300]: ATI Technologies Inc RS480 [Radeon Xpress 200G Series] And when the game crashed i got this error: Code: Allocating