thr3ads.net - Nouveau - [Nouveau] Fwd: GeForce(R) GT 710 1GB PCIE x 1 on arm64 [May 2020]

If this information is useful, please help other people find it:
Share via:

Milan Buška

2020-May-06 13:53 UTC

[Nouveau] GeForce(R) GT 710 1GB PCIE x 1 on arm64

Hi to all.
I'm experimenting with running a
https://www.zotac.com/us/product/graphics_card/geforce%C2%AE-gt-710-1gb-pcie-x-1
card on an Nvidia Jetson TX2 arm64 device.
Possible?
Linux kernel aarch64 5.6.10.
Because Nvidia did not list drivers for this architecture, I'm
experimenting with a nouveau driver.
The Jetson TX2 has a default driver for the host1x framebuffer for output
from the board via HDMI.
I changed the video kernel parameter to nouveau. Booting the system OK only
there is no output on the monitor.
The device can only be controlled via the serial console.
Can anyone advise me where to start setting up - (if something needs to be
set up)

Greeting

Milan Bu?ka

-- 

Remember, no question is too stupid and no problem too small
       -- We've all been beginners
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://lists.freedesktop.org/archives/nouveau/attachments/20200506/32977581/attachment.htm>

Ilia Mirkin

2020-May-06 14:00 UTC

head link

[Nouveau] GeForce(R) GT 710 1GB PCIE x 1 on arm64

In general it should be possible. If you're having issues, please include
dmesg.

One issue that has come up is that the PCIe controllers on such boards
have very narrow memory windows, not enough to map certain (required)
BARs of NVIDIA GPUs (or other GPUs, I'd expect). This comes up in
dmesg with PCI-related errors.

Cheers,

  -ilia

On Wed, May 6, 2020 at 9:53 AM Milan Bu?ka <milan.buska at gmail.com>
wrote:>
> Hi to all.
> I'm experimenting with running a
https://www.zotac.com/us/product/graphics_card/geforce%C2%AE-gt-710-1gb-pcie-x-1
card on an Nvidia Jetson TX2 arm64 device.
> Possible?
> Linux kernel aarch64 5.6.10.
> Because Nvidia did not list drivers for this architecture, I'm
experimenting with a nouveau driver.
> The Jetson TX2 has a default driver for the host1x framebuffer for output
from the board via HDMI.
> I changed the video kernel parameter to nouveau. Booting the system OK only
there is no output on the monitor.
> The device can only be controlled via the serial console.
> Can anyone advise me where to start setting up - (if something needs to be
set up)
>
> Greeting
>
> Milan Bu?ka
>
> --
>
> Remember, no question is too stupid and no problem too small
>        -- We've all been beginners
> _______________________________________________
> Nouveau mailing list
> Nouveau at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/nouveau

Ilia Mirkin

2020-May-06 14:26 UTC

head link

[Nouveau] GeForce(R) GT 710 1GB PCIE x 1 on arm64

[please keep list cc'd in your replies]

On Wed, May 6, 2020 at 10:15 AM Milan Bu?ka <milan.buska at gmail.com>
wrote:> [    0.000000] Linux version 5.6.10-zotac (root at saux) (gcc version 9.3.0
(SAUX Aarch64)) #1 SMP PREEMPT Tue May 5 22:16:40 CEST 2020
> [    0.000000] Machine model: NVIDIA Jetson TX2 Developer Kit
[...]
> [    3.965934] tegra-pcie 10003000.pcie: Adding to iommu group 5
> [    3.966435] tegra-pcie 10003000.pcie: 4x1, 1x1 configuration
> [    3.968057] tegra-pcie 10003000.pcie: probing port 0, using 4 lanes
> [    3.970121] tegra-pcie 10003000.pcie: probing port 1, using 0 lanes
> [    3.972183] tegra-pcie 10003000.pcie: probing port 2, using 1 lanes
> [    5.260316] tegra-pcie 10003000.pcie: link 1 down, ignoring
> [    6.479410] tegra-pcie 10003000.pcie: link 2 down, ignoring
> [    6.479579] tegra-pcie 10003000.pcie: PCI host bridge to bus 0000:00
> [    6.479602] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
> [    6.479627] pci_bus 0000:00: root bus resource [mem
0x50100000-0x57ffffff]
> [    6.479646] pci_bus 0000:00: root bus resource [mem
0x58000000-0x7fffffff pref]
> [    6.479668] pci_bus 0000:00: root bus resource [bus 00-ff]
> [    6.479850] pci 0000:00:01.0: [10de:10e5] type 01 class 0x060400
> [    6.479887] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset
0x4 may corrupt adjacent RW1C bits
> [    6.479916] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset
0x4 may corrupt adjacent RW1C bits
> [    6.479993] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset
0x3e may corrupt adjacent RW1C bits
> [    6.480041] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset
0x52 may corrupt adjacent RW1C bits
> [    6.480118] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
> [    6.480141] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset
0x4c may corrupt adjacent RW1C bits
> [    6.482485] pci 0000:00:01.0: bridge configuration invalid ([bus
00-00]), reconfiguring
> [    6.482521] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset
0x3e may corrupt adjacent RW1C bits
> [    6.482576] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset
0x3e may corrupt adjacent RW1C bits
> [    6.482607] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset
0x3e may corrupt adjacent RW1C bits
> [    6.482635] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset
0x6 may corrupt adjacent RW1C bits
> [    6.482794] pci 0000:01:00.0: [10de:128b] type 00 class 0x030000
> [    6.482931] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00ffffff]
> [    6.482976] pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x07ffffff 64bit
pref]
> [    6.483022] pci 0000:01:00.0: reg 0x1c: [mem 0x00000000-0x01ffffff 64bit
pref]
> [    6.483056] pci 0000:01:00.0: reg 0x24: [io  0x0000-0x007f]
> [    6.483087] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
> [    6.483313] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth,
limited by 5 GT/s x1 link at 0000:00:01.0 (capable of 32.000 Gb/s with 5 GT/s x8
link)
> [    6.483463] pci 0000:01:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=none,locks=none
> [    6.483556] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300
> [    6.483648] pci 0000:01:00.1: reg 0x10: [mem 0x00000000-0x00003fff]
> [    6.485344] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
> [    6.485368] pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset
0x1a may corrupt adjacent RW1C bits
> [    6.485411] pci 0000:00:01.0: BAR 15: assigned [mem
0x58000000-0x63ffffff 64bit pref]
> [    6.485431] pci 0000:00:01.0: BAR 14: assigned [mem
0x50800000-0x51ffffff]
> [    6.485448] pci 0000:00:01.0: BAR 13: assigned [io  0x1000-0x1fff]
> [    6.485471] pci 0000:01:00.0: BAR 1: assigned [mem 0x58000000-0x5fffffff
64bit pref]
> [    6.485510] pci 0000:01:00.0: BAR 3: assigned [mem 0x60000000-0x61ffffff
64bit pref]
> [    6.485547] pci 0000:01:00.0: BAR 0: assigned [mem
0x51000000-0x51ffffff]
> [    6.485569] pci 0000:01:00.0: BAR 6: assigned [mem 0x50800000-0x5087ffff
pref]
> [    6.485588] pci 0000:01:00.1: BAR 0: assigned [mem
0x50880000-0x50883fff]
> [    6.485610] pci 0000:01:00.0: BAR 5: assigned [io  0x1000-0x107f]
> [    6.485631] pci 0000:00:01.0: PCI bridge to [bus 01]
> [    6.485648] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
> [    6.485668] pci 0000:00:01.0:   bridge window [mem
0x50800000-0x51ffffff]
> [    6.485691] pci 0000:00:01.0:   bridge window [mem 0x58000000-0x63ffffff
64bit pref]
> [    6.485760] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host
bridge
> [    6.485857] pcieport 0000:00:01.0: Adding to iommu group 5
> [    6.485930] pcieport 0000:00:01.0: enabling device (0000 -> 0003)
> [    6.486051] pcieport 0000:00:01.0: PME: Signaling with IRQ 40
> [    6.486378] pcieport 0000:00:01.0: AER: enabled with IRQ 40
> [    6.486714] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
Hm, I can't say that I've ever seen that "2-byte config write"
errors.
However it does appear to have assigned the BARs correctly, so there's
that.
> [   12.885866] nouveau 0000:01:00.0: Adding to iommu group 5
> [   12.891373] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
> [   12.897619] nouveau 0000:01:00.0: NVIDIA GK208B (b060b0b1)
> [   13.086682] nouveau 0000:01:00.0: bios: version 80.28.a6.00.10
> [   13.288626] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
> [   14.749542] [TTM] Zone  kernel: Available graphics memory: 3986272 KiB
> [   14.756096] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
> [   14.762626] [TTM] Initializing pool allocator
> [   14.766999] [TTM] Initializing DMA pool allocator
> [   14.771750] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
> [   14.776808] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
> [   14.782147] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
> [   14.787905] nouveau 0000:01:00.0: DRM: DCB version 4.0
> [   14.793053] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030
> [   14.799504] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011f62 00020010
> [   14.805948] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022f10 00000000
> [   14.812393] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031
> [   14.818056] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
> [   14.823724] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
> [   14.831977] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
> [   14.841690] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [   14.848322] [drm] Driver supports precise vblank timestamp query.
> [   15.136647] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x80000,
bo 00000000d53241e4
> [   17.146929] nouveau 0000:01:00.0: DRM: core notifier timeout
> [   19.146846] nouveau 0000:01:00.0: DRM: base-0: timeout
> [   19.147554] Console: switching to colour frame buffer device 240x67
> [   19.446311] nouveau 0000:01:00.0: DRM: GPU lockup - switching to
software fbcon
> [   19.501043] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device
> [   19.523471] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on
minor 0
So that "core notifier timeout" and subsequent GPU lockup indicate
that something's amiss. Most of the initialization was able to be
completed, including reading EDID from your monitor (hence the
non-default resolution), but we're not seeing values change properly /
missing notifications. I'm actually wondering if we aren't
initializing the GPU because we think it's already initialized. Could
you boot with nouveau.config=NvForcePost=1 and see if that helps?

  -ilia

Milan Buška

2020-May-06 14:28 UTC

head link

[Nouveau] Fwd: GeForce(R) GT 710 1GB PCIE x 1 on arm64

---------- Forwarded message ---------
Od: Milan Bu?ka <milan.buska at gmail.com>
Date: st 6. 5. 2020 v 16:15
Subject: Re: [Nouveau] GeForce(R) GT 710 1GB PCIE x 1 on arm64
To: Ilia Mirkin <imirkin at alum.mit.edu>


Here is:

# dmesg
[    0.000000] Booting Linux on physical CPU 0x0000000100 [0x411fd073]
[    0.000000] Linux version 5.6.10-zotac (root at saux) (gcc version
9.3.0 (SAUX Aarch64)) #1 SMP PREEMPT Tue May 5 22:16:40 CEST 2020
[    0.000000] Machine model: NVIDIA Jetson TX2 Developer Kit
[    0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options
'')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 32 MiB at 0x00000000fe000000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem
0x0000000080000000-0x00000002771fffff]
[    0.000000] NUMA: NODE_DATA [mem 0x274e1d100-0x274e1efff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000bfffffff]
[    0.000000]   DMA32    [mem 0x00000000c0000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000002771fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000efffffff]
[    0.000000]   node   0: [mem 0x00000000f0200000-0x00000002757fffff]
[    0.000000]   node   0: [mem 0x0000000275e00000-0x0000000275ffffff]
[    0.000000]   node   0: [mem 0x0000000276600000-0x00000002767fffff]
[    0.000000]   node   0: [mem 0x0000000277000000-0x00000002771fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000002771fffff]
[    0.000000] On node 0 totalpages: 2055168
[    0.000000]   DMA zone: 4096 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 262144 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 4096 pages used for memmap
[    0.000000]   DMA32 zone: 261632 pages, LIFO batch:63
[    0.000000]   Normal zone: 24008 pages used for memmap
[    0.000000]   Normal zone: 1531392 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 23 pages/cpu s53272 r8192 d32744 u94208
[    0.000000] pcpu-alloc: s53272 r8192 d32744 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: EL2 vector hardening
[    0.000000] Speculative Store Bypass Disable mitigation not required
[    0.000000] CPU features: detected: ARM erratum 1319367
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2022968
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/mmcblk2p1 rw rootwait
rootfstype=ext4 console=ttyS0,115200n8 console=tty0
no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 video=nouveau
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10,
4194304 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
[    0.000000] Memory: 7934464K/8220672K available (12348K kernel
code, 1968K rwdata, 7104K rodata, 5312K init, 462K bss, 253440K
reserved, 32768K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay
is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from
start_kernel+0x2a8/0x434 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns
[    0.000002] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps
every 4398046511088ns
[    0.008440] Console: colour dummy device 80x25
[    0.013065] printk: console [tty0] enabled
[    0.017328] printk: bootconsole [uart8250] disabled
[    0.022452] Calibrating delay loop (skipped), value calculated
using timer frequency.. 62.50 BogoMIPS (lpj=125000)
[    0.022464] pid_max: default: 32768 minimum: 301
[    0.022516] LSM: Security Framework initializing
[    0.022575] Mount-cache hash table entries: 16384 (order: 5, 131072
bytes, linear)
[    0.022609] Mountpoint-cache hash table entries: 16384 (order: 5,
131072 bytes, linear)
[    0.054464] rcu: Hierarchical SRCU implementation.
[    0.063372] Tegra Revision: A02 SKU: 220 CPU Process: 0 SoC Process: 0
[    0.063529] EFI services will not be available.
[    0.070490] smp: Bringing up secondary CPUs ...
[    0.103111] CPU features: detected: Kernel page table isolation (KPTI)
[    0.103142] Detected PIPT I-cache on CPU1
[    0.103154] CPU features: SANITY CHECK: Unexpected variation in
SYS_CTR_EL0. Boot CPU: 0x0000008444c004, CPU1: 0x0000009444c004
[    0.103164] CPU features: SANITY CHECK: Unexpected variation in
SYS_ID_AA64DFR0_EL1. Boot CPU: 0x00000010305106, CPU1:
0x00000010305116
[    0.103178] CPU features: SANITY CHECK: Unexpected variation in
SYS_ID_DFR0_EL1. Boot CPU: 0x00000003010066, CPU1: 0x00000003001066
[    0.103191] CPU features: Unsupported CPU feature variation detected.
[    0.103235] CPU1: Booted secondary processor 0x0000000000 [0x4e0f0030]
[    0.134851] Detected PIPT I-cache on CPU2
[    0.134863] CPU features: SANITY CHECK: Unexpected variation in
SYS_CTR_EL0. Boot CPU: 0x0000008444c004, CPU2: 0x0000009444c004
[    0.134872] CPU features: SANITY CHECK: Unexpected variation in
SYS_ID_AA64DFR0_EL1. Boot CPU: 0x00000010305106, CPU2:
0x00000010305116
[    0.134885] CPU features: SANITY CHECK: Unexpected variation in
SYS_ID_DFR0_EL1. Boot CPU: 0x00000003010066, CPU2: 0x00000003001066
[    0.134924] CPU2: Booted secondary processor 0x0000000001 [0x4e0f0030]
[    0.166768] Detected PIPT I-cache on CPU3
[    0.166798] CPU3: Booted secondary processor 0x0000000101 [0x411fd073]
[    0.198807] Detected PIPT I-cache on CPU4
[    0.198827] CPU4: Booted secondary processor 0x0000000102 [0x411fd073]
[    0.230850] Detected PIPT I-cache on CPU5
[    0.230869] CPU5: Booted secondary processor 0x0000000103 [0x411fd073]
[    0.230911] smp: Brought up 1 node, 6 CPUs
[    0.231002] SMP: Total of 6 processors activated.
[    0.231010] CPU features: detected: 32-bit EL0 Support
[    0.231017] CPU features: detected: CRC32 instructions
[    1.067178] CPU: All CPU(s) started at EL2
[    1.067221] alternatives: patching kernel code
[    1.068792] devtmpfs: initialized
[    1.071545] KASLR disabled due to lack of seed
[    1.071769] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[    1.071787] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    1.072319] pinctrl core: initialized pinctrl subsystem
[    1.073007] thermal_sys: Registered thermal governor 'step_wise'
[    1.073009] thermal_sys: Registered thermal governor
'power_allocator'
[    1.073345] DMI not present or invalid.
[    1.073677] NET: Registered protocol family 16
[    1.074497] DMA: preallocated 256 KiB pool for atomic allocations
[    1.074512] audit: initializing netlink subsys (disabled)
[    1.074605] audit: type=2000 audit(0.244:1): state=initialized
audit_enabled=0 res=1
[    1.075234] cpuidle: using governor menu
[    1.075428] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    1.075577] ASID allocator initialised with 32768 entries
[    1.076232] Serial: AMBA PL011 UART driver
[    1.087732] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    1.087746] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    1.087755] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    1.087762] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    1.089126] cryptd: max_cpu_qlen set to 1000
[    1.091498] ACPI: Interpreter disabled.
[    1.092609] iommu: Default domain type: Translated
[    1.092734] vgaarb: loaded
[    1.092899] SCSI subsystem initialized
[    1.092996] libata version 3.00 loaded.
[    1.093103] usbcore: registered new interface driver usbfs
[    1.093129] usbcore: registered new interface driver hub
[    1.093186] usbcore: registered new device driver usb
[    1.093526] pps_core: LinuxPPS API ver. 1 registered
[    1.093534] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti at linux.it>
[    1.093551] PTP clock support registered
[    1.093623] EDAC MC: Ver: 3.0.0
[    1.094308] FPGA manager framework
[    1.094352] Advanced Linux Sound Architecture Driver Initialized.
[    1.094815] clocksource: Switched to clocksource arch_sys_counter
[    1.094939] VFS: Disk quotas dquot_6.6.0
[    1.094981] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.095094] pnp: PnP ACPI: disabled
[    1.098416] NET: Registered protocol family 2
[    1.098643] tcp_listen_portaddr_hash hash table entries: 4096
(order: 4, 65536 bytes, linear)
[    1.098718] TCP established hash table entries: 65536 (order: 7,
524288 bytes, linear)
[    1.099055] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes, linear)
[    1.099670] TCP: Hash tables configured (established 65536 bind 65536)
[    1.099762] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    1.099890] UDP-Lite hash table entries: 4096 (order: 5, 131072
bytes, linear)
[    1.100095] NET: Registered protocol family 1
[    1.100351] RPC: Registered named UNIX socket transport module.
[    1.100360] RPC: Registered udp transport module.
[    1.100366] RPC: Registered tcp transport module.
[    1.100372] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.100382] PCI: CLS 0 bytes, default 64
[    1.101384] kvm [1]: IPA Size Limit: 40bits
[    1.102945] kvm [1]: Hyp mode initialized successfully
[    1.114296] Initialise system trusted keyrings
[    1.114582] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[    1.124805] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.125844] NFS: Registering the id_resolver key type
[    1.125884] Key type id_resolver registered
[    1.125903] Key type id_legacy registered
[    1.125927] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.126150] 9p: Installing v9fs 9p2000 file system support
[    1.130588] Key type asymmetric registered
[    1.130634] Asymmetric key parser 'x509' registered
[    1.130688] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 245)
[    1.130714] io scheduler mq-deadline registered
[    1.130732] io scheduler kyber registered
[    1.134117] tegra-xusb-padctl 3520000.padctl: failed to read
calibration fuse: -517
[    1.142583] EINJ: ACPI disabled.
[    1.155545] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.157706] SuperH (H)SCI(F) driver initialized
[    1.158125] msm_serial: driver initialized
[    1.159812] arm-smmu 12000000.iommu: probing hardware configuration...
[    1.159841] arm-smmu 12000000.iommu: SMMUv2 with:
[    1.159863] arm-smmu 12000000.iommu:         stage 1 translation
[    1.159883] arm-smmu 12000000.iommu:         stage 2 translation
[    1.159903] arm-smmu 12000000.iommu:         nested translation
[    1.159925] arm-smmu 12000000.iommu:         stream matching with
128 register groups
[    1.159976] arm-smmu 12000000.iommu:         64 context banks (0
stage-2 only)
[    1.160003] arm-smmu 12000000.iommu:         Supported page sizes: 0x61311000
[    1.160026] arm-smmu 12000000.iommu:         Stage-1: 48-bit VA -> 48-bit
IPA
[    1.160049] arm-smmu 12000000.iommu:         Stage-2: 48-bit IPA -> 48-bit
PA
[    1.171037] loop: module loaded
[    1.174752] libphy: Fixed MDIO Bus: probed
[    1.175111] tun: Universal TUN/TAP device driver, 1.6
[    1.175800] thunder_xcv, ver 1.0
[    1.175868] thunder_bgx, ver 1.0
[    1.175924] nicpf, ver 1.0
[    1.176402] hclge is initializing
[    1.176609] hns3: Hisilicon Ethernet Network Driver for Hip08
Family - version
[    1.176643] hns3: Copyright (c) 2017 Huawei Corporation.
[    1.176725] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.176752] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.176828] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    1.176877] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.176949] igbvf: Intel(R) Gigabit Virtual Function Network Driver
- version 2.4.0-k
[    1.176981] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.177238] sky2: driver version 1.30
[    1.177886] VFIO - User Level meta-driver version: 0.3
[    1.179316] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[    1.179344] ehci-pci: EHCI PCI platform driver
[    1.179388] ehci-platform: EHCI generic platform driver
[    1.179496] ehci-orion: EHCI orion driver
[    1.179572] ehci-exynos: EHCI Exynos driver
[    1.179641] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.179686] ohci-pci: OHCI PCI platform driver
[    1.179732] ohci-platform: OHCI generic platform driver
[    1.179838] ohci-exynos: OHCI Exynos driver
[    1.180268] tegra-xusb 3530000.usb: Adding to iommu group 0
[    1.180604] usbcore: registered new interface driver usb-storage
[    1.181852] mousedev: PS/2 mouse device common for all mice
[    1.183057] i2c /dev entries driver
[    1.186847] sdhci: Secure Digital Host Controller Interface driver
[    1.186879] sdhci: Copyright(c) Pierre Ossman
[    1.187193] Synopsys Designware Multimedia Card Interface Driver
[    1.187829] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.188291] sdhci-tegra 3400000.sdhci: Adding to iommu group 1
[    1.188580] sdhci-tegra 3440000.sdhci: Adding to iommu group 2
[    1.189114] sdhci-tegra 3460000.sdhci: Adding to iommu group 3
[    1.190272] ledtrig-cpu: registered to indicate activity on CPUs
[    1.191435] usbcore: registered new interface driver usbhid
[    1.191466] usbhid: USB HID core driver
[    1.195987] NET: Registered protocol family 17
[    1.196237] 9pnet: Installing 9P2000 support
[    1.196331] Key type dns_resolver registered
[    1.196958] registered taskstats version 1
[    1.197002] Loading compiled-in X.509 certificates
[    1.197365] tegra-bpmp bpmp: Adding to iommu group 4
[    1.197843] tegra-bpmp bpmp: firmware: 69fa4e41a01fc02a4db1adf71922a54c
[    1.200370] max77620 0-003c: PMIC Version OTP:0x45 and ES:0x8
[    1.206359] max77620-sd0: supplied by VDD_5V0_SYS
[    1.206597] VDD_DDR_1V1_PMIC: Bringing 1125000uV into 1100000-1100000uV
[    1.208955] max77620-sd1: supplied by VDD_5V0_SYS
[    1.209990] max77620-sd2: supplied by VDD_5V0_SYS
[    1.211092] max77620-sd3: supplied by VDD_5V0_SYS
[    1.212334] max77620-ldo0: supplied by VDD_5V0_SYS
[    1.212727] max77620-ldo1: supplied by VDD_5V0_SYS
[    1.213790] max77620-ldo2: supplied by VDD_5V0_SYS
[    1.215193] max77620-ldo3: supplied by VDD_5V0_SYS
[    1.216133] max77620-ldo4: supplied by VDD_1V8
[    1.216209] VDD_RTC: Bringing 800000uV into 1000000-1000000uV
[    1.217241] max77620-ldo5: supplied by VDD_5V0_SYS
[    1.217327] VDDIO_SDMMC3_AP: Bringing 1800000uV into 2800000-2800000uV
[    1.218181] max77620-ldo6: supplied by VDD_1V8
[    1.219254] max77620-ldo7: supplied by AVDD_DSI_CSI_1V2
[    1.219334] VDD_HDMI_1V05: Bringing 1000000uV into 1050000-1050000uV
[    1.220272] max77620-ldo8: supplied by AVDD_DSI_CSI_1V2
[    1.220337] VDD_PEX_1V05: Bringing 1000000uV into 1050000-1050000uV
[    2.396019] max77686-rtc max77620-rtc: registered as rtc0
[    2.411115] random: fast init done
[    3.664208] random: crng init done
[    3.959266] VDD_1V8_AP: supplied by VDD_1V8
[    3.962047] tegra-xusb-padctl 3520000.padctl: failed to read
calibration fuse: -517
[    3.965934] tegra-pcie 10003000.pcie: Adding to iommu group 5
[    3.966435] tegra-pcie 10003000.pcie: 4x1, 1x1 configuration
[    3.968057] tegra-pcie 10003000.pcie: probing port 0, using 4 lanes
[    3.970121] tegra-pcie 10003000.pcie: probing port 1, using 0 lanes
[    3.972183] tegra-pcie 10003000.pcie: probing port 2, using 1 lanes
[    5.260316] tegra-pcie 10003000.pcie: link 1 down, ignoring
[    6.479410] tegra-pcie 10003000.pcie: link 2 down, ignoring
[    6.479579] tegra-pcie 10003000.pcie: PCI host bridge to bus 0000:00
[    6.479602] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    6.479627] pci_bus 0000:00: root bus resource [mem 0x50100000-0x57ffffff]
[    6.479646] pci_bus 0000:00: root bus resource [mem
0x58000000-0x7fffffff pref]
[    6.479668] pci_bus 0000:00: root bus resource [bus 00-ff]
[    6.479850] pci 0000:00:01.0: [10de:10e5] type 01 class 0x060400
[    6.479887] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x4 may corrupt adjacent RW1C bits
[    6.479916] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x4 may corrupt adjacent RW1C bits
[    6.479993] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x3e may corrupt adjacent RW1C bits
[    6.480041] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x52 may corrupt adjacent RW1C bits
[    6.480118] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    6.480141] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x4c may corrupt adjacent RW1C bits
[    6.482485] pci 0000:00:01.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[    6.482521] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x3e may corrupt adjacent RW1C bits
[    6.482576] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x3e may corrupt adjacent RW1C bits
[    6.482607] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x3e may corrupt adjacent RW1C bits
[    6.482635] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x6 may corrupt adjacent RW1C bits
[    6.482794] pci 0000:01:00.0: [10de:128b] type 00 class 0x030000
[    6.482931] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00ffffff]
[    6.482976] pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x07ffffff
64bit pref]
[    6.483022] pci 0000:01:00.0: reg 0x1c: [mem 0x00000000-0x01ffffff
64bit pref]
[    6.483056] pci 0000:01:00.0: reg 0x24: [io  0x0000-0x007f]
[    6.483087] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    6.483313] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth,
limited by 5 GT/s x1 link at 0000:00:01.0 (capable of 32.000 Gb/s with
5 GT/s x8 link)
[    6.483463] pci 0000:01:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=none,locks=none
[    6.483556] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300
[    6.483648] pci 0000:01:00.1: reg 0x10: [mem 0x00000000-0x00003fff]
[    6.485344] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    6.485368] pci_bus 0000:00: 1-byte config write to 0000:00:01.0
offset 0x1a may corrupt adjacent RW1C bits
[    6.485411] pci 0000:00:01.0: BAR 15: assigned [mem
0x58000000-0x63ffffff 64bit pref]
[    6.485431] pci 0000:00:01.0: BAR 14: assigned [mem 0x50800000-0x51ffffff]
[    6.485448] pci 0000:00:01.0: BAR 13: assigned [io  0x1000-0x1fff]
[    6.485471] pci 0000:01:00.0: BAR 1: assigned [mem
0x58000000-0x5fffffff 64bit pref]
[    6.485510] pci 0000:01:00.0: BAR 3: assigned [mem
0x60000000-0x61ffffff 64bit pref]
[    6.485547] pci 0000:01:00.0: BAR 0: assigned [mem 0x51000000-0x51ffffff]
[    6.485569] pci 0000:01:00.0: BAR 6: assigned [mem
0x50800000-0x5087ffff pref]
[    6.485588] pci 0000:01:00.1: BAR 0: assigned [mem 0x50880000-0x50883fff]
[    6.485610] pci 0000:01:00.0: BAR 5: assigned [io  0x1000-0x107f]
[    6.485631] pci 0000:00:01.0: PCI bridge to [bus 01]
[    6.485648] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
[    6.485668] pci 0000:00:01.0:   bridge window [mem 0x50800000-0x51ffffff]
[    6.485691] pci 0000:00:01.0:   bridge window [mem
0x58000000-0x63ffffff 64bit pref]
[    6.485760] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host
bridge
[    6.485857] pcieport 0000:00:01.0: Adding to iommu group 5
[    6.485930] pcieport 0000:00:01.0: enabling device (0000 -> 0003)
[    6.486051] pcieport 0000:00:01.0: PME: Signaling with IRQ 40
[    6.486378] pcieport 0000:00:01.0: AER: enabled with IRQ 40
[    6.486714] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    6.488429] printk: console [ttyS0] disabled
[    6.488494] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 23,
base_baud = 25500000) is a Tegra
[    8.274504] printk: console [ttyS0] enabled
[    8.280831] tegra_rtc c2a0000.rtc: registered as rtc1
[    8.285923] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock
[    8.310453] sdhci-tegra 3400000.sdhci: Got CD GPIO
[    8.315311] sdhci-tegra 3400000.sdhci: Got WP GPIO
[    8.373916] mmc0: SDHCI controller on 3440000.sdhci [3440000.sdhci]
using ADMA 64-bit
[    8.390274] mmc1: CQHCI version 5.10
[    8.421160] mmc1: SDHCI controller on 3460000.sdhci [3460000.sdhci]
using ADMA 64-bit
[    8.429306] SD_CARD_SW_PWR: supplied by VDD_3V3_SYS
[    8.436338] VDD_HDMI_5V0: supplied by VDD_5V0_SYS
[    8.441647] VDD_USB0: supplied by VDD_5V0_SYS
[    8.446328] VDD_USB1: supplied by VDD_5V0_SYS
[    8.452028]  usb3-0: usb3-0 supply vbus not found, using dummy regulator
[    8.465559] tegra-xusb 3530000.usb: Firmware timestamp: 2019-07-08
19:32:42 UTC
[    8.473136] tegra-xusb 3530000.usb: xHCI Host Controller
[    8.478628] tegra-xusb 3530000.usb: new USB bus registered,
assigned bus number 1
[    8.487255] tegra-xusb 3530000.usb: hcc params 0x0184fd25 hci
version 0x100 quirks 0x0000000000010010
[    8.496685] tegra-xusb 3530000.usb: irq 33, io mem 0x03530000
[    8.503386] hub 1-0:1.0: USB hub found
[    8.507405] hub 1-0:1.0: 4 ports detected
[    8.511897] tegra-xusb 3530000.usb: xHCI Host Controller
[    8.517417] tegra-xusb 3530000.usb: new USB bus registered,
assigned bus number 2
[    8.525069] tegra-xusb 3530000.usb: Host supports USB 3.0 SuperSpeed
[    8.531671] usb usb2: We don't know the algorithms for LPM for this
host, disabling LPM.
[    8.541006] hub 2-0:1.0: USB hub found
[    8.545647] hub 2-0:1.0: 3 ports detected
[    8.551861] sdhci-tegra 3400000.sdhci: Got CD GPIO
[    8.556926] sdhci-tegra 3400000.sdhci: Got WP GPIO
[    8.602946] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci]
using ADMA 64-bit
[    8.613332] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    8.650221] mmc1: Command Queue Engine enabled
[    8.654676] max77686-rtc max77620-rtc: setting system clock to
2000-01-02T01:56:45 UTC (946778205)
[    8.663700] mmc1: new HS400 MMC card at address 0001
[    8.669069] mmcblk1: mmc1:0001 032G34 29.1 GiB
[    8.670182] ALSA device list:
[    8.673798] mmcblk1boot0: mmc1:0001 032G34 partition 1 4.00 MiB
[    8.676572]   No soundcards found.
[    8.686655] mmcblk1boot1: mmc1:0001 032G34 partition 2 4.00 MiB
[    8.693651] mmcblk1rpmb: mmc1:0001 032G34 partition 3 4.00 MiB,
chardev (235:0)
[    8.704320]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
[    8.723772] Waiting for root device /dev/mmcblk2p1...
[    8.850853] usb 1-2: new high-speed USB device number 2 using tegra-xusb
[    8.928906] mmc2: new ultra high speed SDR104 SDHC card at address 0001
[    8.935898] mmcblk2: mmc2:0001 SD32G 29.0 GiB
[    8.948924]  mmcblk2: p1 p2
[    9.018797] hub 1-2:1.0: USB hub found
[    9.023150] hub 1-2:1.0: 4 ports detected
[    9.139364] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using
tegra-xusb
[    9.176816] hub 2-1:1.0: USB hub found
[    9.181354] hub 2-1:1.0: 4 ports detected
[    9.300221] EXT4-fs (mmcblk2p1): recovery complete
[    9.308115] EXT4-fs (mmcblk2p1): mounted filesystem with ordered
data mode. Opts: (null)
[    9.314844] usb 1-2.1: new full-speed USB device number 3 using tegra-xusb
[    9.316224] VFS: Mounted root (ext4 filesystem) on device 179:97.
[    9.333279] devtmpfs: mounted
[    9.337465] Freeing unused kernel memory: 5312K
[    9.342075] Run /sbin/init as init process
[    9.346166]   with arguments:
[    9.346167]     /sbin/init
[    9.346168]   with environment:
[    9.346170]     HOME=/
[    9.346171]     TERM=linux
[    9.429475] input: 2.4G Mouse as
/devices/platform/3530000.usb/usb1/1-2/1-2.1/1-2.1:1.0/0003:1EA7:0064.0001/input/input1
[    9.440583] input: 2.4G Mouse as
/devices/platform/3530000.usb/usb1/1-2/1-2.1/1-2.1:1.0/0003:1EA7:0064.0001/input/input2
[    9.451600] hid-generic 0003:1EA7:0064.0001: input: USB HID v1.10
Mouse [2.4G Mouse] on usb-3530000.usb-2.1/input0
[    9.542846] usb 1-2.2: new low-speed USB device number 4 using tegra-xusb
[    9.549748] udevd[218]: starting version 3.2.9
[    9.613608] udevd[219]: starting eudev-3.2.9
[    9.666365] input: USB USB Keyboard as
/devices/platform/3530000.usb/usb1/1-2/1-2.2/1-2.2:1.0/0003:1A2C:2C27.0002/input/input3
[    9.735146] hid-generic 0003:1A2C:2C27.0002: input: USB HID v1.10
Keyboard [USB USB Keyboard] on usb-3530000.usb-2.2/input0
[    9.750489] input: USB USB Keyboard Consumer Control as
/devices/platform/3530000.usb/usb1/1-2/1-2.2/1-2.2:1.1/0003:1A2C:2C27.0003/input/input4
[    9.823088] input: USB USB Keyboard System Control as
/devices/platform/3530000.usb/usb1/1-2/1-2.2/1-2.2:1.1/0003:1A2C:2C27.0003/input/input5
[    9.836014] hid-generic 0003:1A2C:2C27.0003: input: USB HID v1.10
Device [USB USB Keyboard] on usb-3530000.usb-2.2/input1
[    9.898044] tegra-hda 3510000.hda: Adding to iommu group 6
[    9.963273] input: jetson-tx2-hda HDMI/DP,pcm=3 as
/devices/platform/3510000.hda/sound/card0/input6
[    9.973149] input: jetson-tx2-hda HDMI/DP,pcm=7 as
/devices/platform/3510000.hda/sound/card0/input7
[   10.117602] dwc-eth-dwmac 2490000.ethernet: Adding to iommu group 7
[   10.124019] dwc-eth-dwmac 2490000.ethernet: no reset control found
[   10.143356] dwc-eth-dwmac 2490000.ethernet: User ID: 0x10, Synopsys ID: 0x41
[   10.150406] dwc-eth-dwmac 2490000.ethernet:  DWMAC4/5
[   10.155457] dwc-eth-dwmac 2490000.ethernet: DMA HW capability
register supported
[   10.162843] dwc-eth-dwmac 2490000.ethernet: RX Checksum Offload
Engine supported
[   10.170228] dwc-eth-dwmac 2490000.ethernet: TX Checksum insertion supported
[   10.177179] dwc-eth-dwmac 2490000.ethernet: Wake-Up On Lan supported
[   10.183541] dwc-eth-dwmac 2490000.ethernet: TSO supported
[   10.188935] dwc-eth-dwmac 2490000.ethernet: Enable RX Mitigation
via HW Watchdog Timer
[   10.196842] dwc-eth-dwmac 2490000.ethernet: Enabled Flow TC (entries=8)
[   10.203448] dwc-eth-dwmac 2490000.ethernet: TSO feature enabled
[   10.209360] dwc-eth-dwmac 2490000.ethernet: SPH feature enabled
[   10.215271] dwc-eth-dwmac 2490000.ethernet: Using 40 bits DMA width
[   10.221708] libphy: stmmac: probed
[   12.885866] nouveau 0000:01:00.0: Adding to iommu group 5
[   12.891373] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[   12.897619] nouveau 0000:01:00.0: NVIDIA GK208B (b060b0b1)
[   13.086682] nouveau 0000:01:00.0: bios: version 80.28.a6.00.10
[   13.288626] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[   14.749542] [TTM] Zone  kernel: Available graphics memory: 3986272 KiB
[   14.756096] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[   14.762626] [TTM] Initializing pool allocator
[   14.766999] [TTM] Initializing DMA pool allocator
[   14.771750] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[   14.776808] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[   14.782147] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[   14.787905] nouveau 0000:01:00.0: DRM: DCB version 4.0
[   14.793053] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030
[   14.799504] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011f62 00020010
[   14.805948] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022f10 00000000
[   14.812393] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031
[   14.818056] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[   14.823724] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[   14.831977] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[   14.841690] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.848322] [drm] Driver supports precise vblank timestamp query.
[   15.136647] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb:
0x80000, bo 00000000d53241e4
[   17.146929] nouveau 0000:01:00.0: DRM: core notifier timeout
[   19.146846] nouveau 0000:01:00.0: DRM: base-0: timeout
[   19.147554] Console: switching to colour frame buffer device 240x67
[   19.446311] nouveau 0000:01:00.0: DRM: GPU lockup - switching to
software fbcon
[   19.501043] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device
[   19.523471] [drm] Initialized nouveau 1.3.1 20120801 for
0000:01:00.0 on minor 0
[   19.666266] EXT4-fs (mmcblk2p1): re-mounted. Opts: discard
[   19.692357] EXT4-fs (mmcblk2p1): re-mounted. Opts: discard
[   19.742824] Adding 4160488k swap on /dev/mmcblk2p2.  Priority:-2
extents:1 across:4160488k SS
[   19.799112] CPU1: shutdown
[   19.801921] psci: CPU1 killed (polled 0 ms)
[   19.835071] CPU2: shutdown
[   19.837876] psci: CPU2 killed (polled 0 ms)
[   28.550823] 8021q: 802.1Q VLAN Support v1.8
[   28.731099] cfg80211: Loading compiled-in X.509 certificates for
regulatory database
[   28.734427] cfg80211: Loaded X.509 cert 'sforshee:
00b28ddf47aef9cea7'
[   28.741182] platform regulatory.0: Direct firmware load for
regulatory.db failed with error -2
[   28.741186] platform regulatory.0: Falling back to sysfs fallback
for: regulatory.db
[   28.741659] cfg80211: failed to load regulatory.db
[   28.811574] dwc-eth-dwmac 2490000.ethernet eth0: PHY [stmmac-0:00]
driver [Generic PHY] (irq=POLL)
[   28.813147] dwmac4: Master AXI performs any burst length
[   28.813175] dwc-eth-dwmac 2490000.ethernet eth0: No Safety Features
support found
[   28.813288] dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008
Advanced Timestamp supported
[   28.813395] dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
[   28.813422] dwc-eth-dwmac 2490000.ethernet eth0: configuring for
phy/rgmii link mode
[   28.814189] 8021q: adding VLAN 0 to HW filter on device eth0
[   33.917866] dwc-eth-dwmac 2490000.ethernet eth0: Link is Up -
1Gbps/Full - flow control rx/tx
[   34.063886] NET: Registered protocol family 10
[   34.064952] Segment Routing with IPv6
[   38.682841] VDD_RTC: disabling
[   38.682847] VDDIO_SDMMC3_AP: disabling
[   38.683022] VDD_HDMI_1V05: disabling
[   38.683027] VDD_HDMI_5V0: disabling
[   38.683029] VDD_USB0: disabling

st 6. 5. 2020 v 16:00 odes?latel Ilia Mirkin <imirkin at alum.mit.edu>
napsal:>
> In general it should be possible. If you're having issues, please
include dmesg.
>
> One issue that has come up is that the PCIe controllers on such boards
> have very narrow memory windows, not enough to map certain (required)
> BARs of NVIDIA GPUs (or other GPUs, I'd expect). This comes up in
> dmesg with PCI-related errors.
>
> Cheers,
>
>   -ilia
>
> On Wed, May 6, 2020 at 9:53 AM Milan Bu?ka <milan.buska at gmail.com>
wrote:
> >
> > Hi to all.
> > I'm experimenting with running a
https://www.zotac.com/us/product/graphics_card/geforce%C2%AE-gt-710-1gb-pcie-x-1
card on an Nvidia Jetson TX2 arm64 device.
> > Possible?
> > Linux kernel aarch64 5.6.10.
> > Because Nvidia did not list drivers for this architecture, I'm
experimenting with a nouveau driver.
> > The Jetson TX2 has a default driver for the host1x framebuffer for
output from the board via HDMI.
> > I changed the video kernel parameter to nouveau. Booting the system OK
only there is no output on the monitor.
> > The device can only be controlled via the serial console.
> > Can anyone advise me where to start setting up - (if something needs
to be set up)
> >
> > Greeting
> >
> > Milan Bu?ka
> >
> > --
> >
> > Remember, no question is too stupid and no problem too small
> >        -- We've all been beginners
> > _______________________________________________
> > Nouveau mailing list
> > Nouveau at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/nouveau


-- 

Remember, no question is too stupid and no problem too small
       -- We've all been beginners


-- 

Remember, no question is too stupid and no problem too small
       -- We've all been beginners

Lucas Stach

2020-May-06 14:38 UTC

head link

[Nouveau] GeForce(R) GT 710 1GB PCIE x 1 on arm64

Am Mittwoch, den 06.05.2020, 10:26 -0400 schrieb Ilia
Mirkin:> [please keep list cc'd in your replies]
> 
> On Wed, May 6, 2020 at 10:15 AM Milan Bu?ka <milan.buska at
gmail.com> wrote:
> > [    0.000000] Linux version 5.6.10-zotac (root at saux) (gcc version
9.3.0 (SAUX Aarch64)) #1 SMP PREEMPT Tue May 5 22:16:40 CEST 2020
> > [    0.000000] Machine model: NVIDIA Jetson TX2 Developer Kit
> 
> [...]
> 
> > [    3.965934] tegra-pcie 10003000.pcie: Adding to iommu group 5
> > [    3.966435] tegra-pcie 10003000.pcie: 4x1, 1x1 configuration
> > [    3.968057] tegra-pcie 10003000.pcie: probing port 0, using 4 lanes
> > [    3.970121] tegra-pcie 10003000.pcie: probing port 1, using 0 lanes
> > [    3.972183] tegra-pcie 10003000.pcie: probing port 2, using 1 lanes
> > [    5.260316] tegra-pcie 10003000.pcie: link 1 down, ignoring
> > [    6.479410] tegra-pcie 10003000.pcie: link 2 down, ignoring
> > [    6.479579] tegra-pcie 10003000.pcie: PCI host bridge to bus
0000:00
> > [    6.479602] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
> > [    6.479627] pci_bus 0000:00: root bus resource [mem
0x50100000-0x57ffffff]
> > [    6.479646] pci_bus 0000:00: root bus resource [mem
0x58000000-0x7fffffff pref]
> > [    6.479668] pci_bus 0000:00: root bus resource [bus 00-ff]
> > [    6.479850] pci 0000:00:01.0: [10de:10e5] type 01 class 0x060400
> > [    6.479887] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x4 may corrupt adjacent RW1C bits
> > [    6.479916] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x4 may corrupt adjacent RW1C bits
> > [    6.479993] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x3e may corrupt adjacent RW1C bits
> > [    6.480041] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x52 may corrupt adjacent RW1C bits
> > [    6.480118] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot
D3cold
> > [    6.480141] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x4c may corrupt adjacent RW1C bits
> > [    6.482485] pci 0000:00:01.0: bridge configuration invalid ([bus
00-00]), reconfiguring
> > [    6.482521] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x3e may corrupt adjacent RW1C bits
> > [    6.482576] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x3e may corrupt adjacent RW1C bits
> > [    6.482607] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x3e may corrupt adjacent RW1C bits
> > [    6.482635] pci_bus 0000:00: 2-byte config write to 0000:00:01.0
offset 0x6 may corrupt adjacent RW1C bits
> > [    6.482794] pci 0000:01:00.0: [10de:128b] type 00 class 0x030000
> > [    6.482931] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00ffffff]
> > [    6.482976] pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x07ffffff
64bit pref]
> > [    6.483022] pci 0000:01:00.0: reg 0x1c: [mem 0x00000000-0x01ffffff
64bit pref]
> > [    6.483056] pci 0000:01:00.0: reg 0x24: [io  0x0000-0x007f]
> > [    6.483087] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff
pref]
> > [    6.483313] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth,
limited by 5 GT/s x1 link at 0000:00:01.0 (capable of 32.000 Gb/s with 5 GT/s x8
link)
> > [    6.483463] pci 0000:01:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=none,locks=none
> > [    6.483556] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300
> > [    6.483648] pci 0000:01:00.1: reg 0x10: [mem 0x00000000-0x00003fff]
> > [    6.485344] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated
to 01
> > [    6.485368] pci_bus 0000:00: 1-byte config write to 0000:00:01.0
offset 0x1a may corrupt adjacent RW1C bits
> > [    6.485411] pci 0000:00:01.0: BAR 15: assigned [mem
0x58000000-0x63ffffff 64bit pref]
> > [    6.485431] pci 0000:00:01.0: BAR 14: assigned [mem
0x50800000-0x51ffffff]
> > [    6.485448] pci 0000:00:01.0: BAR 13: assigned [io  0x1000-0x1fff]
> > [    6.485471] pci 0000:01:00.0: BAR 1: assigned [mem
0x58000000-0x5fffffff 64bit pref]
> > [    6.485510] pci 0000:01:00.0: BAR 3: assigned [mem
0x60000000-0x61ffffff 64bit pref]
> > [    6.485547] pci 0000:01:00.0: BAR 0: assigned [mem
0x51000000-0x51ffffff]
> > [    6.485569] pci 0000:01:00.0: BAR 6: assigned [mem
0x50800000-0x5087ffff pref]
> > [    6.485588] pci 0000:01:00.1: BAR 0: assigned [mem
0x50880000-0x50883fff]
> > [    6.485610] pci 0000:01:00.0: BAR 5: assigned [io  0x1000-0x107f]
> > [    6.485631] pci 0000:00:01.0: PCI bridge to [bus 01]
> > [    6.485648] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
> > [    6.485668] pci 0000:00:01.0:   bridge window [mem
0x50800000-0x51ffffff]
> > [    6.485691] pci 0000:00:01.0:   bridge window [mem
0x58000000-0x63ffffff 64bit pref]
> > [    6.485760] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate
host bridge
> > [    6.485857] pcieport 0000:00:01.0: Adding to iommu group 5
> > [    6.485930] pcieport 0000:00:01.0: enabling device (0000 ->
0003)
> > [    6.486051] pcieport 0000:00:01.0: PME: Signaling with IRQ 40
> > [    6.486378] pcieport 0000:00:01.0: AER: enabled with IRQ 40
> > [    6.486714] pci 0000:01:00.1: D0 power state depends on
0000:01:00.0
> 
> Hm, I can't say that I've ever seen that "2-byte config
write" errors.
> However it does appear to have assigned the BARs correctly, so there's
> that.
> 
> > [   12.885866] nouveau 0000:01:00.0: Adding to iommu group 5
> > [   12.891373] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
> > [   12.897619] nouveau 0000:01:00.0: NVIDIA GK208B (b060b0b1)
> > [   13.086682] nouveau 0000:01:00.0: bios: version 80.28.a6.00.10
> > [   13.288626] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
> > [   14.749542] [TTM] Zone  kernel: Available graphics memory: 3986272
KiB
> > [   14.756096] [TTM] Zone   dma32: Available graphics memory: 2097152
KiB
> > [   14.762626] [TTM] Initializing pool allocator
> > [   14.766999] [TTM] Initializing DMA pool allocator
> > [   14.771750] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
> > [   14.776808] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
> > [   14.782147] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
> > [   14.787905] nouveau 0000:01:00.0: DRM: DCB version 4.0
> > [   14.793053] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02
00020030
> > [   14.799504] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011f62
00020010
> > [   14.805948] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022f10
00000000
> > [   14.812393] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031
> > [   14.818056] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
> > [   14.823724] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
> > [   14.831977] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer
copies
> > [   14.841690] [drm] Supports vblank timestamp caching Rev 2
(21.10.2013).
> > [   14.848322] [drm] Driver supports precise vblank timestamp query.
> > [   15.136647] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb:
0x80000, bo 00000000d53241e4
> > [   17.146929] nouveau 0000:01:00.0: DRM: core notifier timeout
> > [   19.146846] nouveau 0000:01:00.0: DRM: base-0: timeout
> > [   19.147554] Console: switching to colour frame buffer device 240x67
> > [   19.446311] nouveau 0000:01:00.0: DRM: GPU lockup - switching to
software fbcon
> > [   19.501043] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer
device
> > [   19.523471] [drm] Initialized nouveau 1.3.1 20120801 for
0000:01:00.0 on minor 0
> 
> So that "core notifier timeout" and subsequent GPU lockup
indicate
> that something's amiss. Most of the initialization was able to be
> completed, including reading EDID from your monitor (hence the
> non-default resolution), but we're not seeing values change properly /
> missing notifications. I'm actually wondering if we aren't
> initializing the GPU because we think it's already initialized. Could
> you boot with nouveau.config=NvForcePost=1 and see if that helps?
Note that PCIe is non-coherent on most ARM devices (including Tegra TX2
IIRC), so if the notifier BO isn't mapped as uncached memory, you
probably won't see the expected notifier content, as you are reading
stale cache line content.

Regards,
Lucas

Reasonably Related Threads

Search for more reasonably related threads

Nouveau - May 2020 - Fwd: GeForce(R) GT 710 1GB PCIE x 1 on arm64

[Nouveau] GeForce(R) GT 710 1GB PCIE x 1 on arm64

[Nouveau] GeForce(R) GT 710 1GB PCIE x 1 on arm64

[Nouveau] GeForce(R) GT 710 1GB PCIE x 1 on arm64

[Nouveau] Fwd: GeForce(R) GT 710 1GB PCIE x 1 on arm64

[Nouveau] GeForce(R) GT 710 1GB PCIE x 1 on arm64

Reasonably Related Threads