similar to: centos 6.8 creates install to sde instead of sda

Pete Batard <pete at akeo.ie> wrote: > On 2013.08.09 16:24, Bernd Blaauw wrote: > >> Sorry. If you are substituting any files you should substitute them all. > > > From where I stand, the idea that someone using an ISO will only ever > use it in optical media mode (either real or emulated) is a thing of > the past. > > These days, you can be almost certain

I must have really shot myself in the foot on this one. I reinstalled CentOS 4.4 (have to, for now) on my test machine, exactly the way it was before (same options anyway), but when it comes up, I get: Booting 'CentOS-4 x86_64 (2.6.9-42.ELsmp)' root(hd1,0) Filesystem type is ext2fs, partition type 0x83 kernel /vmlinuz-2.6.9-42.ELsmp ro root=LABEL=/ rhgb quiet Error 15: File not

Somewhere, mdadm is cacheing information. Here is my /etc/mdadm.conf file: more /etc/mdadm.conf # mdadm.conf written out by anaconda DEVICE partitions MAILADDR root ARRAY /dev/md0 level=raid1 num-devices=4 metadata=0.90 UUID=55ff58b2:0abb5bad:42911890:5950dfce ARRAY /dev/md1 level=raid1 num-devices=2 metadata=0.90 UUID=315eaf5c:776c85bd:5fa8189c:68a99382 ARRAY /dev/md2 level=raid1 num-devices=2

CentOS 4.6 Hi All: I am now officially stumped. I have tried everything that can think of and I have googled until I am blue in the face and tried just about everything that I could find that looked the least bit like it might apply and still no (or at least partial) joy. I am going to cram as much information into this email as I can and hope that someone out there can either tell me what I am

I just wants to thank the developers (s) of syslinux , and eventually the construction of your well explained HOWTO I am rather a newbie in informatics , but after several months (!) of efforts, training at learning and experimenting with the terminal & command line writing, I finally got succeful at creating a partedmagic live USB. the last step was rather creepy: I thought I had at last

Hi I would like to start a iso from my USB-Pendrive so I got a Hiren BootCD amd PartedMagic iso + GRUB 2 (1.98~20100115-1) on my USB-Pendrive. My problem it take up to 30sec until the ISO is booted my menu entry: linux16 /memdisk iso initrd16 /boot/iso/pmagic.iso Thanks for any hints M. Simon _________________________________________________________________

Hello all, I am trying to produce the closed-form Ait-Sahalia approximation to the log-likelihood function of a diffusion process but the function arguments I am passing to the function result in NaN being returned. I've checked the 'Transform','S' and 'M' functions and the problem doesn't seem to be with these. Does anyone have any ideas why this isn't working?

Hello, sorry if the question was asked a couple of times before but I couldn't find any useful hinds to this problem using google and the listman search-engine of the archive of this list. Somehow the ext3 filesystem on one of my machines died an after a reboot grub wouldn't come up again. What I did so far: fsck -y /dev/hda4 fsck 1.35 (28-Feb-2004) e2fsck 1.35 (28-Feb-2004)

This is CentOS-6x. I have cloned the HDD of a CentOS-6 system. I booted a host with that drive and received the following error: checking filesystems /dev/mapper/vg_voinet01-lv_root: clean, 128491/4096000 files, 1554114/16304000 blocks /dev/sda1: clean, 47/120016 files, 80115/512000 blocks /dev/mapper/vg_voinet01-lv_home: clean, 7429/204800 files, 90039/819200 blocks

On 09/20/2014 12:07 AM, Andreas Dilger wrote: > On Sep 19, 2014, at 7:56 PM, jd1008 <jd1008@gmail.com> wrote: >> I am reporting this on the advice of the Fedora Users Mailing List Member. >> >> This the mailing list exchange outlining the problem with specifying -S to mkfs, and it's subsequent consequences when fsck is run. >> >> I am reporting this per

I have a CentOS-6.8 system which has a suspected HHD failure. I have booted it into rescue mode from a CentOS-6.5 minimal install CD in order to run fsck -c on it. The system hosts several vms. I have activated the lvs associated with these vm using pvscan -s ; vgscan ; vgchange -ay. An lvscan shows the lvs as ACTIVE. None are mounted. When I try to run fsck on any of them I see the

I have a handful of new systems where I've seen unexpectedly low disk performance on an Avago SAS controller, when using CentOS 7. It looked like a regression, so I installed CentOS 6 on one of them and reloaded CentOS 7 on the other. Immediately after install, a difference is apparent in the RAID rebuild speed. The CentOS 6 system is initializing its software RAID5 array at somewhere

Hello, I've got a problem that is not solved after an e2fsck. What happens is that the kernel (vanilla 2.6.12) does this: journal_bmap: journal block not found at offset 1036 on hda6 Aborting journal on device hda6. ext3_abort called. The filesystem is mounted with errors=panic, so the system reboots. At boot-up an e2fsck is run on /dev/hda6. Sometimes it finds errors, sometimes not.

I would like to see that it is possible to specify which config file should be loaded. I would like to have an extension of the CONFIG command. Normally CONFIG loads the file that is specified after it. It should be nice if syslinux/isolinux/pxelinux/extlinux can choose which config file to load, based on the bootloader from which the current config is runned. If I will explain it with an

When trying to do a yum update, I am told I need more space in /boot. When I check the contents of /boot (ls -l /boot), there are no files. If I do a df -h, there is no available space yet it shows that it has a lot of used space. The fstab shows the following: # This file is edited by fstab-sync - see 'man fstab-sync' for details /dev/VolGroup00/LogVol00 /

Hi folks, For unknown cause I encounter following mounting problem; # /mnt/hda8 mount: wrong fs type, bad option, bad superblock on /dev/hda8, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so # dmesg | tail via82cxxx: timeout while reading AC97 codec (0x9A0000) via82cxxx: timeout while reading AC97 codec (0x9A0000)

Hi, I zero-filled first 10MiB of my SSD(dd if=/dev/zero of=/dev/sda bs=10M count=1). As expected, this wiped my primary GPD header and first partition. Before the wipe, GPT was following: Disk /dev/sda: 250069680 sectors, 119.2 GiB Logical sector size: 512 bytes Disk identifier (GUID): 2EFD285D-F8E6-4262-B380-232E866AF15C Partition table holds up to 128 entries First usable sector is 34, last

> > Well, i''m using here the qla2340 on several boxes. It works > > with Xen 2.0 but noch with Xen 3.0. as part of SUSE Linux 10.0: > > Interesting. If the driver really doews work flawlessly in > Xen 2, then I think the culprit has to be interrupt routeing. > > Under Xen 3, does /proc/interrupts show you''re receiving interrupts? I cannot boot with

> > Well, i''m using here the qla2340 on several boxes. It works > > with Xen 2.0 but noch with Xen 3.0. as part of SUSE Linux 10.0: > > Interesting. If the driver really doews work flawlessly in > Xen 2, then I think the culprit has to be interrupt routeing. > > Under Xen 3, does /proc/interrupts show you''re receiving interrupts? I cannot boot with

Hi, Can anyone guide me in building the lustre using pre-packaged lustre release.I''m using Ubuntu 7.10 I want to build lustre using RHEL2.6 rpms available on my system.I''m referring how_to in wiki. but in that no detailed step by step procedure is given for building lustre using pre-packed release. I''m in need of this. Thanks and Regards, Ashok Bharat -----Original