similar to: how to force outbound ssh through one network card

On Tue, Mar 08, 2016 at 09:41:43PM -0600, Gregory P. Ennis wrote: > Everyone, > > I am putting together a new gateway machine that controls all of the > traffic in and out of one of our offices. ?We we have a machine with > CentOS Linux release 7.2.1511 (Core)??with 3.10.0-327.10.1.el7.x86_64 > kernel which is now equipped with three nic cards. ? We decided to > change our

On 3/8/2016 8:13 PM, Fred Smith wrote: > though I have no personal experience with this, I'm guessing that > the term you want is "bonding" or "bonded interfaces". You can probably > find articles on how to do that with some judicious googling. > I know I've seen such articles, but haven't kept any records of where. NO. you can't bond two

Hi Here is documentation that may help http://lartc.org/howto/lartc.rpdb.multiple-links.html but as John mentions it is painful to get right. On Wed, Mar 9, 2016 at 5:17 PM, John R Pierce <pierce at hogranch.com> wrote: > On 3/8/2016 8:13 PM, Fred Smith wrote: > >> though I have no personal experience with this, I'm guessing that >> the term you want is

On 3/8/2016 8:47 PM, Clint Dilks wrote: > Here is documentation that may help > http://lartc.org/howto/lartc.rpdb.multiple-links.html but as John mentions > it is painful to get right. sadly, that document is like 15 years old, and hasn't been updated. the basics are still valid, but things like how to integrate that with RHEL startup scripts? nada, you're on your own.

Em 09-03-2016 01:54, John R Pierce escreveu: > On 3/8/2016 8:47 PM, Clint Dilks wrote: >> Here is documentation that may help >> http://lartc.org/howto/lartc.rpdb.multiple-links.html but as John >> mentions >> it is painful to get right. > > > sadly, that document is like 15 years old, and hasn't been updated. the > basics are still valid, but things

I did this once more than 10 years ago. If I was to do it again, I would probably get shorewall to do most of the heavy lifting: http://shorewall.net/MultiISP.html

With the current talk on bonding, I have a few questions of my own. I'm setting up a KVM host with CentOS 6.3 x86_64 on which I'd like to attach the VMs to a bonded interface. My target setup is one where two GigE NICs are bonded and then the KVM bridge interface is attached to the bonded interface. Initially I tried to use the balance-alb mode (mode6), but had little luck (receiving

Hi, I am currently struggling with the right way to configure a bonding device via kickstart (via PXE). I am installing servers which have "eno" network interfaces. Instead of the expected bonding device with two active slaves (bonding mode is balance-alb), I get a bonding device with only one active slave and an independent, non-bonded network device. Also the bonding device

Hello All, I was curious to know if I can do traffic shaping on abonded Interface? Ex: I have to interfaces eth1 and eth2 which i have bonded together as bond0 , now the question is can I do shaping on eth1 and eth2 ?? Thanks KartheeK --------------------------------- Here''s a new way to find what you''re looking for - Yahoo! Answers Send FREE SMS to your

I have to provision several dozen * users to a seperate building on our campus in the same subnet. Ordinarily, I'd just run a gigabit cat6 cable to another switch if it doesn't violate the 100 metre rule, but this building is several hundred metres away from my backbone. My only option for cabling to the remote building is copper. My plan is to provision them with a Linux bridge with 4

Hi, Hopefully this won''t be too off-topic (I''ve seen both bonding & vlan mentioned on the list, but not really together). I''ve tried to get bonding (2 x 100Mb EEPro, but will want to try on 1000BaseT) and vlans to work together, but without luck. I can get them working fine (seemingly at least - I didn''t tried bursting on the bonded port) individually.

I've just setup nic bonding on our server (DL585-G7 running Centos 5.5 x86_64) as detailed on the wiki: http://wiki.centos.org/TipsAndTricks/BondingInterfaces and all seems fine but from other "howto's" I've seen on the web, they're should be a /proc/net/bond0/info As far as I can see, I don't have one and I'm not sure if it should be there or its absence is a

Since I upgraded from 4.4 to 4.5 my system which has 2 sets of ALB bonded interfaces hangs on shutdown while doing an ifdown on these interfaces. Has anyone else seen this issue with 4.5 and bonding? Ross S. W. Walker Information Systems Manager Medallion Financial, Corp. 437 Madison Avenue 38th Floor New York, NY 10022 Tel: (212) 328-2165 Fax: (212) 328-2125 WWW: http://www.medallion.com

Hi guys, I am trying to get bonding work on a debian etch system. I searched already in the mailing list but unfortunately I couldnt find a proper solution. This is what i did so far. - Installed Debian Etch on my server - Installed the following packages for using Xen from the Debian repository: xen-hypervisor-3.0.3-1-i386-pae linux-image-2.6.18-5-xen-686 linux-image-2.6.18-5-xen-686 xen-tools

Hi, Is anyone using GlusterFS on Ubuntu in production? Specifically, I'm looking at using the NFS portion of it over a bonded interface. I believe I'll get better speed than user the gluster client across a single interface. Setup: 3 servers running KVM (about 24 VM's) 2 NAS boxes running Ubuntu (13.04 and 13.10) Since Gluster NFS does server side replication, I'll put

I was given the challenge recently of creating a LAN-LAN bridge between two buildings several hundred metres from each other, using only existing Cat 3 wiring and without having to resort to an expensive and finicky 5 Ghz wireless link. I was able to create a 90 megabit link for about $3,000 Cdn with new PC's, CentOS 4.1, and the newly avaliable Black Box VDSL Ethernet Extender, which

Dear List, I am still having difficulty installing a second ethernet card in a new CentOS 6.2 install. Tom Bishop was kind enough to give me an excellent link to figure out how to change the device names the way I need to have them. It looks to me that CentOS is recognizing the st1000spex card from StarTech but I am unable to get data to go in or out of it. The StarTech manual for this card

Trying to think this through, hope someone can lend a hand. I have 3 eths I want to bond together and that seems simple enough. eth0,1,2 <-> bond0 , though not sure how this would be for multiple ip addresses needed for the virtual machines... perhaps eth:0, eth:1 etc....to bond0:1, bond0:2 ? then I want to bridge to my virtual machines.... I am going to be using virtual machines, each

I have two servers with identical hardware ... TYAN i3210w system boards with dual intel gigabit interfaces, and a PCI intel gigabit nic. I'm running Centos 5.4, x86_64, 2.6.18-164.6.1.el5 Every other time I reboot, the nics initialize in a different order. anaconda had setup /etc/modprobe.conf with alias lines for the cards: alias eth0 e1000 alias eth1 e1000e alias eth2 e1000e However,

I four nodes setup to do active-backup bonding and the drivers loaded for the bonded network interfaces vary between tg3 and e100. All interfaces with the e100 driver loaded report errors much like what you see here: bonding: bond0: link status definitely down for interface eth2, disabling it e100: eth2: e100_watchdog: link up, 100Mbps, full-duplex bonding: bond0: link status definitely up for