similar to: No GUI with CentOS-7.2

Sylvain CANOINE wrote: > Could you share your whole Xorg.0.log ? Do you use a custom xorg.conf, or > custom xorg.conf.d files ? Opensource Ati driver, ou proprietary blobs ? Thank you for your interest. I am running CentOS-7 installed from CentOS-7-x86_64-LiveKDE-1503.iso and later upgraded to CentOS-7.2. The only packages I have installed have been from CentOS and Epel repos. I'm sure

Hello Timothy, On 5 January 2016 at 07:55, Timothy Murphy <gayleard at eircom.net> wrote: > When I re-booted my HP MicroServer into CentOS-7.2 > I was given a text console. > When I run "startx" I get the response on screen [edited]: > ===================== > [tim at alfred ~]$ startx > xauth: file /home/tim/.serverauth.21307 does not exist > X.Org X Server

> No error is given in /var/log/Xorg.0.log. > It seems to find an appropriate ATI Radeon driver, > but it has the warnings > (WW) Falling back to old probe method for modesetting > (WW) Falling back to old probe method for fbdev > (WW) Falling back to old probe method for vesa Could you share your whole Xorg.0.log ? Do you use a custom xorg.conf, or custom xorg.conf.d files ?

Maybe there is a better place to post this message but as my question was still CentOS related thought I would start here. Please advise if there is a better forum of which to ask this question. I am playing around with making a "desktop" workstation out of a Raspberry PI3. I have had no problems installing the OS and pretty much have everything working except a Gnome desktop. I

Hi again, It works :-) Reclocking, however, is another kettle of fish. Trying #echo 0f > /sys/kernel/debug/dri/0/pstate hangs X. Trying the same with no X running reveals: Dec 7 10:08:42 dell-smo kernel: [ 728.831020] nouveau 0000:08:00.0: clk: unable to find matching pll values a number of time as then soft lockup. Very much akin to

Hi, With drm-next from http://kernel.ubuntu.com/~kernel-ppa/mainline/drm-next/2016-12-08/ I don't get the error messages, but I still get a soft cpu lockup. What info would you need from me to get it working? Best regards, Sune Mølgaard On 2016-12-08 08:10, Karol Herbst wrote: > hi, > > give the drm-next kernel tree a try. Sadly the reclocking improvements didn't land with

Aha! That seems to do it. If I interpret correctly, it doesn't set it quite to full power, though, but it's certainly an improvement: 07: core 405 MHz memory 810 MHz 0a: core 270-1124 MHz memory 1600 MHz 0f: core 270-1124 MHz memory 2002 MHz AC DC * AC: core 1012 MHz memory 2002 MHz A short run of glmark2 shows aver 100% improvement to ~550 FPS. Interestingly, it's still nowhere

I'm only getting a text console with CentOS-7.2 on my (oldish) HP MicroServer. The only explicit error I see in Xorg.0.log is that no driver is found for my Pixart USB optical mouse. My query is: would that be sufficient to prevent a graphic console? Incidentally, I can use X apps, eg xpdf, if I ssh in from my laptop. As always, any advice gratefully received. -- Timothy Murphy

So, 1. I installed a minimal CentOS-7. 2. I then installed epel-release. 3. I then installed etckeeper from epel. 4. I then ran yum update -y. 5. I then rebooted (kernel update). 6. I then ran "yum groups install "X Window System" 7. I then ran "yum groups "MATE Desktop" 8. I then ran startx. Result: Graphical destop wallpaper appears, spinning disc in center for

Hello, The idea was to use the modesetting DDX instead of Nouveau’s one for Maxwell+ as EXA was [broken][1]. But you can give a try at Ilia’s [patches][2], which fix the Nouveau DDX for GM10x and GM20x (I don’t think it has been tested on a GM108 yet). Best regards, Pierre Moreau [1]: https://cgit.freedesktop.org/nouveau/xf86-video-nouveau/commit/?id=3e2e0faa2ee1cce9c1bb5c7ad80d0592460f3edc

Hi, It would seem like it (attachments are from 4.9-rc1, btw), but it doesn't look like there is any support in the Xorg driver. How can I help with that? Best regards, Sune Mølgaard Translucent ApS On 2016-04-22 09:33, Pierre Moreau wrote: > Hello, > > A patch was merged yesterday to recognise GM108 (see >

hi, give the drm-next kernel tree a try. Sadly the reclocking improvements didn't land with 4.9, so 4.10 is required. Greetings. On 7 December 2016 10:26:44 a.m. GMT+01:00, "Sune Mølgaard" <smo at translucent.dk> wrote: >Hi again, > >It works :-) > >Reclocking, however, is another kettle of fish. > >Trying #echo 0f > /sys/kernel/debug/dri/0/pstate

also you can't change the clocks when there is nothing running on the GPU. I have some patches pending for this in another series, but maybe I may be able toe extract those fixes. Changing the clocks while something is running shouldn't cause any troubles. Alternatively if you don't care about power consumption, you can boot with nouveau.runpm=0 so that the gpu is always on.

you can boot with nouveau.config=NvBoost=2 to enable higher clocks, but that won't fill in the difference compared to Intel. For this there are some changes needed on the mesa side regarding scheduling. Also keep in mind, that PCIe is an important bottleneck here, because the GPU can't push frames fast enough through the bus, that's why any "high FPS" benchmark will be in

Thanks for the help so far, I have already solved the main problem, but sadly it seems I can't find out the last step. I hope you can help me there... Here ist the important part: It is trying to load some nvidia module, although i have already done apt-get purge nvidia* [ 4.636] (II) LoadModule: "glx" [ 4.638] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [

Hello, I'm new here, and I hope I can get any help. At first I thought this is a support mailing list, but it looks more like one for developers. I'm using Nouveau in ubuntu bionic. My problem is, when I connect a second Monitor to my Laptop on DVI-D connector, the monitor is not detected, Nouveau reports it as "disconnected". The Hardware works, because the BIOS uses the

> Maybe there is a better place to post this message but as my question > was still CentOS related thought I would start here. Please advise if > there is a better forum of which to ask this question. > > I am playing around with making a "desktop" workstation out of a > Raspberry PI3. I have had no problems installing the OS and pretty much > have everything working

Thanks for the help so far, I have already solved the main problem, but sadly it seems I can't find out the last step. I hope you can help me there... Here ist the important part: It is trying to load some nvidia module, although i have already done apt-get purge nvidia* [ 4.636] (II) LoadModule: "glx" [ 4.638] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [

https://bugs.freedesktop.org/show_bug.cgi?id=48464 Bug #: 48464 Summary: Crash when GLXVBlank set to true Classification: Unclassified Product: xorg Version: git Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau

I am using xorg-git,mesa-git and xf86-nouveau-git. I noticed that when I turn on compositions (kwin4) there are some problems with screen update, windows,menus are flashing.When I leave from kde to console I got crash.Here is xorg.0.log with crash and the end. [ 4324.923] 1 XSELINUXs still allocated at reset [ 4324.923] TOTAL: 0 objects, 0 bytes, 0 allocs [ 4324.924] 1 CLIENTs still