thr3ads.net - CentOS - [CentOS] Non-Gnome desktop [Nov 2014]

If this information is useful, please help other people find it:
Share via:

James B. Byrne

2014-Nov-10 19:35 UTC

[CentOS] Non-Gnome desktop

So,

1. I installed a minimal CentOS-7.
2. I then installed epel-release.
3. I then installed etckeeper from epel.
4. I then ran yum update -y.
5. I then rebooted (kernel update).
6. I then ran "yum groups install "X Window System"
7. I then ran "yum groups "MATE Desktop"
8. I then ran startx.

Result: Graphical destop wallpaper appears, spinning disc in center for 2-3
seconds then this:

X.Org X Server 1.15.0
Release Date: 2013-12-27
 . . .
(==) Using config directory "etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Initializing built-in extension . . .
Initializing built-in extension DR12
Loading extension GLX
waiting for X server to shut down (EE) Server terminated successfully (0).
Closing log file.

Said log file (/var/log/Xorg.0.log) contains:

X.Org X Server 1.15.0
Release Date: 2013-12-27
[    76.833] X Protocol Version 11, Revision 0
[    76.833] Build Operating System:  2.6.32-220.17.1.el6.x86_64
[    76.833] Current Operating System: Linux lanet126.hamilton.harte-lyne.ca
3.10.0-123.9.3.el7.x86_64 #1 SMP Thu Nov 6 15:06:03 UTC 2014 x86_64 [   
76.833] Kernel command line:
BOOT_IMAGE=/vmlinuz-3.10.0-123.9.3.el7.x86_64
root=/dev/mapper/centos_lanet126-root ro crashkernel=auto
rd.lvm.lv=centos_lanet126/root vconsole.font=latarcyrheb-sun16
vconsole.keymap=us rd.lvm.lv=centos_lanet126/swap rhgb quiet LANG=en_GB.UTF-8
[    76.833] Build Date: 10 June 2014  01:29:18AM
[    76.833] Build ID: xorg-x11-server 1.15.0-7.el7
[    76.833] Current version of pixman: 0.32.4
[    76.833] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    76.833] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    76.834] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 10
12:05:30 2014
[    76.844] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    76.844] (==) Using system config directory
"/usr/share/X11/xorg.conf.d" [
   76.858] (==) No Layout section.  Using the first Screen section. [   
76.858] (==) No screen section available. Using defaults.
[    76.858] (**) |-->Screen "Default Screen Section" (0)
[    76.858] (**) |   |-->Monitor "<default monitor>"
[    76.859] (==) No monitor specified for screen "Default Screen
Section".
	Using a default monitor configuration.
[    76.859] (==) Automatically adding devices
[    76.859] (==) Automatically enabling devices
[    76.859] (==) Automatically adding GPU devices
[    76.862] (==) FontPath set to:
	catalogue:/etc/X11/fontpath.d,
	built-ins
[    76.862] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    76.862] (II) The server relies on udev to provide the list of input
devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    76.862] (II) Loader magic: 0x812020
[    76.862] (II) Module ABI versions:
[    76.862] 	X.Org ANSI C Emulation: 0.4
[    76.862] 	X.Org Video Driver: 15.0
[    76.862] 	X.Org XInput driver : 20.0
[    76.862] 	X.Org Server Extension : 8.0
[    76.862] (II) xfree86: Adding drm device (/dev/dri/card0)
[    76.864] (--) PCI:*(0:0:2:0) 8086:2e12:17aa:3048 rev 3, Mem @
0xfc000000/4194304, 0xe0000000/268435456, I/O @ 0x00001c70/8, BIOS @
0x????????/131072
[    76.864] (--) PCI: (0:0:2:1) 8086:2e13:17aa:3048 rev 3, Mem @
0xfc400000/1048576, BIOS @ 0x????????/65536
[    76.864] Initializing built-in extension Generic Event Extension [   
76.864] Initializing built-in extension SHAPE
[    76.864] Initializing built-in extension MIT-SHM
[    76.864] Initializing built-in extension XInputExtension
[    76.864] Initializing built-in extension XTEST
[    76.864] Initializing built-in extension BIG-REQUESTS
[    76.864] Initializing built-in extension SYNC
[    76.864] Initializing built-in extension XKEYBOARD
[    76.864] Initializing built-in extension XC-MISC
[    76.864] Initializing built-in extension XINERAMA
[    76.864] Initializing built-in extension XFIXES
[    76.864] Initializing built-in extension RENDER
[    76.865] Initializing built-in extension RANDR
[    76.865] Initializing built-in extension COMPOSITE
[    76.865] Initializing built-in extension DAMAGE
[    76.865] Initializing built-in extension MIT-SCREEN-SAVER
[    76.865] Initializing built-in extension DOUBLE-BUFFER
[    76.865] Initializing built-in extension RECORD
[    76.865] Initializing built-in extension DPMS
[    76.865] Initializing built-in extension Present
[    76.865] Initializing built-in extension X-Resource
[    76.865] Initializing built-in extension XVideo
[    76.865] Initializing built-in extension XVideo-MotionCompensation [   
76.865] Initializing built-in extension SELinux
[    76.866] Initializing built-in extension XFree86-VidModeExtension [   
76.866] Initializing built-in extension XFree86-DGA
[    76.867] Initializing built-in extension XFree86-DRI
[    76.868] Initializing built-in extension DRI2
[    76.868] (II) "glx" will be loaded by default.
[    76.868] (WW) "xwayland" is not to be loaded by default. Skipping.
[
76.868] (II) LoadModule: "dri2"
[    76.868] (II) Module "dri2" already built-in
[    76.868] (II) LoadModule: "glamoregl"
[    76.897] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[    76.975] (II) Module glamoregl: vendor="X.Org Foundation"
[    76.975] 	compiled for 1.15.0, module version = 0.5.1
[    76.975] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    76.975] (II) LoadModule: "glx"
[    76.975] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [   
76.977] (II) Module glx: vendor="X.Org Foundation"
[    76.977] 	compiled for 1.15.0, module version = 1.0.0
[    76.977] 	ABI class: X.Org Server Extension, version 8.0
[    76.977] (==) AIGLX enabled
[    76.977] Loading extension GLX
[    76.977] (==) Matched intel as autoconfigured driver 0
[    76.977] (==) Matched intel as autoconfigured driver 1
[    76.977] (==) Matched modesetting as autoconfigured driver 2
[    76.977] (==) Matched fbdev as autoconfigured driver 3
[    76.977] (==) Matched vesa as autoconfigured driver 4
[    76.977] (==) Assigned the driver to the xf86ConfigLayout
[    76.977] (II) LoadModule: "intel"
[    76.977] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [   
77.023] (II) Module intel: vendor="X.Org Foundation"
[    77.023] 	compiled for 1.15.0, module version = 2.21.15
[    77.023] 	Module class: X.Org Video Driver
[    77.023] 	ABI class: X.Org Video Driver, version 15.0
[    77.023] (II) LoadModule: "modesetting"
[    77.023] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so [
   77.025] (II) Module modesetting: vendor="X.Org Foundation"
[    77.025] 	compiled for 1.15.0, module version = 0.8.0
[    77.025] 	Module class: X.Org Video Driver
[    77.025] 	ABI class: X.Org Video Driver, version 15.0
[    77.025] (II) LoadModule: "fbdev"
[    77.025] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [   
77.031] (II) Module fbdev: vendor="X.Org Foundation"
[    77.031] 	compiled for 1.15.0, module version = 0.4.3
[    77.031] 	Module class: X.Org Video Driver
[    77.031] 	ABI class: X.Org Video Driver, version 15.0
[    77.031] (II) LoadModule: "vesa"
[    77.031] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so [   
77.035] (II) Module vesa: vendor="X.Org Foundation"
[    77.035] 	compiled for 1.15.0, module version = 2.3.2
[    77.035] 	Module class: X.Org Video Driver
[    77.035] 	ABI class: X.Org Video Driver, version 15.0
[    77.035] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4
Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
	HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
	HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
	HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD
Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    77.035] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [   
77.035] (II) FBDEV: driver for framebuffer: fbdev
[    77.035] (II) VESA: driver for VESA chipsets: vesa
[    77.035] (++) using VT number 1

[    77.047] (WW) Falling back to old probe method for modesetting [   
77.047] (WW) Falling back to old probe method for fbdev
[    77.047] (II) Loading sub module "fbdevhw"
[    77.047] (II) LoadModule: "fbdevhw"
[    77.047] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[    77.054] (II) Module fbdevhw: vendor="X.Org Foundation"
[    77.054] 	compiled for 1.15.0, module version = 0.0.2
[    77.054] 	ABI class: X.Org Video Driver, version 15.0
[    77.054] (WW) Falling back to old probe method for vesa
[    77.054] (II) intel(0): Creating default Display subsection in Screen
section
	"Default Screen Section" for depth/fbbpp 24/32
[    77.054] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    77.054] (==) intel(0): RGB weight 888
[    77.054] (==) intel(0): Default visual is TrueColor
[    77.054] (--) intel(0): Integrated Graphics Chipset: Intel(R) Q45/Q43 [   
77.054] (**) intel(0): Relaxed fencing enabled
[    77.054] (**) intel(0): Wait on SwapBuffers? enabled
[    77.054] (**) intel(0): Triple buffering? enabled
[    77.054] (**) intel(0): Framebuffer tiled
[    77.054] (**) intel(0): Pixmaps tiled
[    77.054] (**) intel(0): 3D buffers tiled
[    77.054] (**) intel(0): SwapBuffers wait enabled
[    77.054] (==) intel(0): video overlay key set to 0x101fe
[    77.098] (II) intel(0): Output VGA1 has no monitor section
[    77.100] (II) intel(0): Output HDMI1 has no monitor section
[    77.100] (II) intel(0): Output DP1 has no monitor section
[    77.148] (II) intel(0): EDID for output VGA1
[    77.148] (II) intel(0): Manufacturer: BNQ  Model: 7659  Serial#: 745 [   
77.148] (II) intel(0): Year: 2004  Week: 15
[    77.148] (II) intel(0): EDID Version: 1.3
[    77.148] (II) intel(0): Analog Display Input,  Input Voltage Level:
0.700/0.700 V
[    77.148] (II) intel(0): Sync:  Separate  Composite
[    77.148] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 27 [   
77.148] (II) intel(0): Gamma: 2.20
[    77.148] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color
Display
[    77.148] (II) intel(0): First detailed timing is preferred mode [   
77.148] (II) intel(0): redX: 0.637 redY: 0.344   greenX: 0.309 greenY: 0.582
[    77.148] (II) intel(0): blueX: 0.143 blueY: 0.100   whiteX: 0.313 whiteY:
0.329
[    77.148] (II) intel(0): Supported established timings:
[    77.148] (II) intel(0): 720x400 at 70Hz
[    77.148] (II) intel(0): 640x480 at 60Hz
[    77.148] (II) intel(0): 640x480 at 67Hz
[    77.148] (II) intel(0): 640x480 at 72Hz
[    77.148] (II) intel(0): 640x480 at 75Hz
[    77.148] (II) intel(0): 800x600 at 56Hz
[    77.148] (II) intel(0): 800x600 at 60Hz
[    77.148] (II) intel(0): 800x600 at 72Hz
[    77.148] (II) intel(0): 800x600 at 75Hz
[    77.148] (II) intel(0): 832x624 at 75Hz
[    77.148] (II) intel(0): 1024x768 at 60Hz
[    77.148] (II) intel(0): 1024x768 at 70Hz
[    77.148] (II) intel(0): 1024x768 at 75Hz
[    77.148] (II) intel(0): 1280x1024 at 75Hz
[    77.148] (II) intel(0): 1152x864 at 75Hz
[    77.148] (II) intel(0): Manufacturer's mask: 0
[    77.148] (II) intel(0): Supported standard timings:
[    77.148] (II) intel(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    77.148] (II) intel(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
[    77.148] (II) intel(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    77.148] (II) intel(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
[    77.148] (II) intel(0): Supported detailed timing:
[    77.148] (II) intel(0): clock: 108.0 MHz   Image Size:  338 x 270 mm [   
77.148] (II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1440
h_blank_end 1688 h_border: 0
[    77.148] (II) intel(0): v_active: 1024  v_sync: 1025  v_sync_end 1028
v_blanking: 1066 v_border: 0
[    77.148] (II) intel(0): Supported detailed timing:
[    77.148] (II) intel(0): clock: 25.2 MHz   Image Size:  304 x 228 mm [   
77.148] (II) intel(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end
800 h_border: 0
[    77.148] (II) intel(0): v_active: 350  v_sync: 387  v_sync_end 389
v_blanking: 449 v_border: 0
[    77.148] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max:
81 kHz, PixClock max 145 MHz
[    77.148] (II) intel(0): Monitor name: BenQ FP731&#65533;
[    77.148] (II) intel(0): EDID (in hex):
[    77.148] (II) intel(0): 	00ffffffffffff0009d15976e9020000
[    77.148] (II) intel(0): 	0f0e01036c221b78ea00a5a3584f9524
[    77.148] (II) intel(0): 	195054bfef80714f81908180818c0101
[    77.148] (II) intel(0): 	010101010101302a009851002a403070
[    77.148] (II) intel(0): 	1300520e1100001ed50980a0205e6310
[    77.148] (II) intel(0): 	1060520830e41000001a000000fd0038
[    77.148] (II) intel(0): 	4b1f510e000a202020202020000000fc
[    77.148] (II) intel(0): 	0042656e51204650373331a02020008b
[    77.148] (II) intel(0): Printing probed modes for output VGA1
[    77.148] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280
1328 1440
1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    77.148] (II) intel(0): Modeline "1280x1024"x76.0  141.81  1280
1376 1512
1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
[    77.148] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280
1296 1440
1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    77.148] (II) intel(0): Modeline "1280x1024"x72.0  132.84  1280
1368 1504
1728  1024 1025 1028 1067 -hsync +vsync (76.9 kHz)
[    77.148] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152
1216 1344
1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    77.148] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024
1040 1136
1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    77.148] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024
1048 1184
1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    77.148] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024
1048 1184
1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    77.148] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864
928 1152
624 625 628 667 -hsync -vsync (49.7 kHz e)
[    77.148] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856
976 1040
600 637 643 666 +hsync +vsync (48.1 kHz e)
[    77.148] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816
896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[    77.148] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840
968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[    77.148] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824
896 1024
600 601 603 625 +hsync +vsync (35.2 kHz e)
[    77.148] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656
720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[    77.148] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664
704 832
480 489 491 520 -hsync -vsync (37.9 kHz e)
[    77.148] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704
768 864
480 483 486 525 -hsync -vsync (35.0 kHz e)
[    77.148] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656
752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[    77.148] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738
846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[    77.148] (II) intel(0): Modeline "640x350"x70.1   25.17  640 656
752 800
350 387 389 449 +hsync -vsync (31.5 kHz e)
[    77.150] (II) intel(0): EDID for output HDMI1
[    77.150] (II) intel(0): EDID for output DP1
[    77.150] (II) intel(0): Output VGA1 connected
[    77.150] (II) intel(0): Output HDMI1 disconnected
[    77.150] (II) intel(0): Output DP1 disconnected
[    77.150] (II) intel(0): Using exact sizes for initial modes
[    77.150] (II) intel(0): Output VGA1 using initial mode 1280x1024 +0+0 [   
77.150] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise
stated.
[    77.150] (II) intel(0): Kernel page flipping support detected, enabling [ 
  77.150] (==) intel(0): DPI set to (96, 96)
[    77.150] (II) Loading sub module "fb"
[    77.150] (II) LoadModule: "fb"
[    77.150] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    77.162] (II) Module fb: vendor="X.Org Foundation"
[    77.162] 	compiled for 1.15.0, module version = 1.0.0
[    77.162] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    77.162] (II) Loading sub module "dri2"
[    77.162] (II) LoadModule: "dri2"
[    77.162] (II) Module "dri2" already built-in
[    77.162] (II) UnloadModule: "modesetting"
[    77.162] (II) Unloading modesetting
[    77.162] (II) UnloadModule: "fbdev"
[    77.162] (II) Unloading fbdev
[    77.162] (II) UnloadSubModule: "fbdevhw"
[    77.162] (II) Unloading fbdevhw
[    77.162] (II) UnloadModule: "vesa"
[    77.162] (II) Unloading vesa
[    77.162] (==) Depth 24 pixmap format is 32 bpp
[    77.172] (II) intel(0): [DRI2] Setup complete
[    77.172] (II) intel(0): [DRI2]   DRI driver: i965
[    77.172] (II) intel(0): Allocated new frame buffer 1280x1024 stride 5120,
tiled
[    77.183] (II) UXA(0): Driver registered support for the following
operations:
[    77.183] (II)         solid
[    77.183] (II)         copy
[    77.183] (II)         composite (RENDER acceleration)
[    77.183] (II)         put_image
[    77.183] (II)         get_image
[    77.183] (==) intel(0): Backing store enabled
[    77.183] (==) intel(0): Silken mouse enabled
[    77.183] (II) intel(0): Initializing HW Cursor
[    77.183] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[    77.183] (==) intel(0): DPMS enabled
[    77.183] (==) intel(0): Intel XvMC decoder enabled
[    77.183] (II) intel(0): Set up textured video
[    77.183] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    77.183] (II) intel(0): direct rendering: DRI2 Enabled
[    77.183] (==) intel(0): hotplug detection: "enabled"
[    77.191] (--) RandR disabled
[    77.196] (II) SELinux: Disabled by boolean
[    77.319] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    77.319] (II) AIGLX: enabled GLX_ARB_create_context
[    77.319] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    77.319] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [   
77.319] (II) AIGLX: enabled GLX_INTEL_swap_event
[    77.319] (II) AIGLX: enabled GLX_SGI_swap_control and
GLX_MESA_swap_control
[    77.319] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    77.319] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    77.319] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    77.319] (II) AIGLX: Loaded and initialized i965
[    77.319] (II) GLX: Initialized DRI2 GL provider for screen 0
[    77.319] (II) intel(0): Setting screen physical size to 338 x 270 [   
77.653] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[    77.653] (**) Power Button: Applying InputClass "evdev keyboard
catchall"
[    77.653] (**) Power Button: Applying InputClass "system-keyboard"
[
77.653] (II) LoadModule: "evdev"
[    77.653] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [   
77.658] (II) Module evdev: vendor="X.Org Foundation"
[    77.658] 	compiled for 1.15.0, module version = 2.8.2
[    77.658] 	Module class: X.Org XInput Driver
[    77.658] 	ABI class: X.Org XInput driver, version 20.0
[    77.658] (II) Using input driver 'evdev' for 'Power Button'
[    77.658] (**) Power Button: always reports core events
[    77.658] (**) evdev: Power Button: Device: "/dev/input/event1" [
77.658] (--) evdev: Power Button: Vendor 0 Product 0x1
[    77.658] (--) evdev: Power Button: Found keys
[    77.658] (II) evdev: Power Button: Configuring as keyboard
[    77.658] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    77.658] (II) XINPUT: Adding extended input device "Power Button"
(type:
KEYBOARD, id 6)
[    77.658] (**) Option "xkb_rules" "evdev"
[    77.658] (**) Option "xkb_model" "pc104"
[    77.658] (**) Option "xkb_layout" "us,gb"
[    77.658] (**) Option "xkb_variant" ","
[    77.700] (II) config/udev: Adding input device Video Bus
(/dev/input/event2)
[    77.700] (**) Video Bus: Applying InputClass "evdev keyboard
catchall" [
 77.700] (**) Video Bus: Applying InputClass "system-keyboard" [   
77.700]
(II) Using input driver 'evdev' for 'Video Bus'
[    77.700] (**) Video Bus: always reports core events
[    77.700] (**) evdev: Video Bus: Device: "/dev/input/event2"
[    77.700] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    77.700] (--) evdev: Video Bus: Found keys
[    77.700] (II) evdev: Video Bus: Configuring as keyboard
[    77.700] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input2/event2"
[    77.700] (II) XINPUT: Adding extended input device "Video Bus"
(type:
KEYBOARD, id 7)
[    77.700] (**) Option "xkb_rules" "evdev"
[    77.700] (**) Option "xkb_model" "pc104"
[    77.700] (**) Option "xkb_layout" "us,gb"
[    77.700] (**) Option "xkb_variant" ","
[    77.700] (II) config/udev: Adding input device Power Button
(/dev/input/event0)
[    77.700] (**) Power Button: Applying InputClass "evdev keyboard
catchall"
[    77.700] (**) Power Button: Applying InputClass "system-keyboard"
[
77.700] (II) Using input driver 'evdev' for 'Power Button'
[    77.700] (**) Power Button: always reports core events
[    77.700] (**) evdev: Power Button: Device: "/dev/input/event0" [
77.700] (--) evdev: Power Button: Vendor 0 Product 0x1
[    77.700] (--) evdev: Power Button: Found keys
[    77.700] (II) evdev: Power Button: Configuring as keyboard
[    77.700] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input0/event0"
[    77.700] (II) XINPUT: Adding extended input device "Power Button"
(type:
KEYBOARD, id 8)
[    77.700] (**) Option "xkb_rules" "evdev"
[    77.700] (**) Option "xkb_model" "pc104"
[    77.700] (**) Option "xkb_layout" "us,gb"
[    77.701] (**) Option "xkb_variant" ","
[    77.701] (II) config/udev: Adding drm device (/dev/dri/card0)
[    77.701] (II) config/udev: Adding input device HID 0b38:000e
(/dev/input/event3)
[    77.701] (**) HID 0b38:000e: Applying InputClass "evdev keyboard
catchall"
[    77.701] (**) HID 0b38:000e: Applying InputClass "system-keyboard"
[
77.701] (II) Using input driver 'evdev' for 'HID 0b38:000e'
[    77.701] (**) HID 0b38:000e: always reports core events
[    77.701] (**) evdev: HID 0b38:000e: Device: "/dev/input/event3" [
77.701] (--) evdev: HID 0b38:000e: Vendor 0xb38 Product 0xe
[    77.701] (--) evdev: HID 0b38:000e: Found keys
[    77.701] (II) evdev: HID 0b38:000e: Configuring as keyboard
[    77.701] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3/event3"
[    77.701] (II) XINPUT: Adding extended input device "HID 0b38:000e"
(type:
KEYBOARD, id 9)
[    77.701] (**) Option "xkb_rules" "evdev"
[    77.701] (**) Option "xkb_model" "pc104"
[    77.701] (**) Option "xkb_layout" "us,gb"
[    77.701] (**) Option "xkb_variant" ","
[    77.702] (II) config/udev: Adding input device HID 0b38:000e
(/dev/input/event4)
[    77.702] (**) HID 0b38:000e: Applying InputClass "evdev keyboard
catchall"
[    77.702] (**) HID 0b38:000e: Applying InputClass "system-keyboard"
[
77.702] (II) Using input driver 'evdev' for 'HID 0b38:000e'
[    77.702] (**) HID 0b38:000e: always reports core events
[    77.702] (**) evdev: HID 0b38:000e: Device: "/dev/input/event4" [
77.702] (--) evdev: HID 0b38:000e: Vendor 0xb38 Product 0xe
[    77.702] (--) evdev: HID 0b38:000e: Found 1 mouse buttons
[    77.702] (--) evdev: HID 0b38:000e: Found scroll wheel(s)
[    77.702] (--) evdev: HID 0b38:000e: Found relative axes
[    77.702] (II) evdev: HID 0b38:000e: Forcing relative x/y axes to exist. [ 
  77.702] (--) evdev: HID 0b38:000e: Found absolute axes
[    77.702] (II) evdev: HID 0b38:000e: Forcing absolute x/y axes to exist. [ 
  77.702] (--) evdev: HID 0b38:000e: Found keys
[    77.702] (II) evdev: HID 0b38:000e: Configuring as mouse
[    77.702] (II) evdev: HID 0b38:000e: Configuring as keyboard
[    77.702] (II) evdev: HID 0b38:000e: Adding scrollwheel support [   
77.702] (**) evdev: HID 0b38:000e: YAxisMapping: buttons 4 and 5 [    77.702]
(**) evdev: HID 0b38:000e: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    77.702] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4/event4"
[    77.702] (II) XINPUT: Adding extended input device "HID 0b38:000e"
(type:
KEYBOARD, id 10)
[    77.702] (**) Option "xkb_rules" "evdev"
[    77.702] (**) Option "xkb_model" "pc104"
[    77.702] (**) Option "xkb_layout" "us,gb"
[    77.702] (**) Option "xkb_variant" ","
[    77.702] (II) evdev: HID 0b38:000e: initialized for relative axes. [   
77.702] (WW) evdev: HID 0b38:000e: ignoring absolute axes.
[    77.702] (**) HID 0b38:000e: (accel) keeping acceleration scheme 1 [   
77.702] (**) HID 0b38:000e: (accel) acceleration profile 0
[    77.702] (**) HID 0b38:000e: (accel) acceleration factor: 2.000 [   
77.702] (**) HID 0b38:000e: (accel) acceleration threshold: 4 [    77.702]
(II) config/udev: Adding input device USB Optical Mouse (/dev/input/event5)
[    77.702] (**) USB Optical Mouse: Applying InputClass "evdev pointer
catchall"
[    77.702] (II) Using input driver 'evdev' for 'USB Optical
Mouse' [
77.702] (**) USB Optical Mouse: always reports core events
[    77.702] (**) evdev: USB Optical Mouse: Device:
"/dev/input/event5" [
77.702] (--) evdev: USB Optical Mouse: Vendor 0x192f Product 0x916 [   
77.702] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[    77.702] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[    77.702] (--) evdev: USB Optical Mouse: Found relative axes
[    77.702] (--) evdev: USB Optical Mouse: Found x and y relative axes [   
77.702] (II) evdev: USB Optical Mouse: Configuring as mouse
[    77.702] (II) evdev: USB Optical Mouse: Adding scrollwheel support [   
77.702] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [   
77.702] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    77.702] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5/event5"
[    77.702] (II) XINPUT: Adding extended input device "USB Optical
Mouse"
(type: MOUSE, id 11)
[    77.703] (II) evdev: USB Optical Mouse: initialized for relative axes. [  
 77.703] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [   
77.703] (**) USB Optical Mouse: (accel) acceleration profile 0 [    77.703]
(**) USB Optical Mouse: (accel) acceleration factor: 2.000 [    77.703] (**)
USB Optical Mouse: (accel) acceleration threshold: 4 [    77.703] (II)
config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[    77.703] (II) No input driver specified, ignoring this device. [   
77.703] (II) This device may have been added with another device file. [   
77.703] (II) config/udev: Adding input device HDA Intel Rear Mic
(/dev/input/event10)
[    77.703] (II) No input driver specified, ignoring this device. [   
77.703] (II) This device may have been added with another device file. [   
77.703] (II) config/udev: Adding input device HDA Intel Front Mic
(/dev/input/event11)
[    77.703] (II) No input driver specified, ignoring this device. [   
77.703] (II) This device may have been added with another device file. [   
77.703] (II) config/udev: Adding input device HDA Intel Front Headphone
(/dev/input/event7)
[    77.703] (II) No input driver specified, ignoring this device. [   
77.703] (II) This device may have been added with another device file. [   
77.704] (II) config/udev: Adding input device HDA Intel Line Out
(/dev/input/event8)
[    77.704] (II) No input driver specified, ignoring this device. [   
77.704] (II) This device may have been added with another device file. [   
77.704] (II) config/udev: Adding input device HDA Intel Line
(/dev/input/event9)
[    77.704] (II) No input driver specified, ignoring this device. [   
77.704] (II) This device may have been added with another device file. [   
77.704] (II) config/udev: Adding input device PC Speaker
(/dev/input/event6)
[    77.704] (II) No input driver specified, ignoring this device. [   
77.704] (II) This device may have been added with another device file. [   
78.284] (II) evdev: USB Optical Mouse: Close
[    78.284] (II) UnloadModule: "evdev"
[    78.284] (II) evdev: HID 0b38:000e: Close
[    78.284] (II) UnloadModule: "evdev"
[    78.284] (II) evdev: HID 0b38:000e: Close
[    78.284] (II) UnloadModule: "evdev"
[    78.284] (II) evdev: Power Button: Close
[    78.284] (II) UnloadModule: "evdev"
[    78.284] (II) evdev: Video Bus: Close
[    78.284] (II) UnloadModule: "evdev"
[    78.284] (II) evdev: Power Button: Close
[    78.284] (II) UnloadModule: "evdev"
[    78.356] (EE) Server terminated successfully (0). Closing log file

So, what is going one?  Does this Desktop work for anyone else without gnome3
installed?  What am I leaving out?  Am I suppose run some sort of X
configuration program?



-- 
***          E-Mail is NOT a SECURE channel          ***
James B. Byrne                mailto:ByrneJB at Harte-Lyne.ca
Harte & Lyne Limited          http://www.harte-lyne.ca
9 Brockley Drive              vox: +1 905 561 1241
Hamilton, Ontario             fax: +1 905 561 0757
Canada  L8E 3C3

Frank Cox

2014-Nov-10 19:57 UTC

head link

[CentOS] Non-Gnome desktop

On Mon, 10 Nov 2014 14:35:05 -0500
James B. Byrne wrote:
>  Does this Desktop work for anyone else without gnome3
> installed?  What am I leaving out?  Am I suppose run some sort of X
> configuration program?
I've done this a few times now, and it's worked every time:

Install the Centos 7 Live CD.

Install epel-release

Install Mate Desktop

Remove the parts of gnome that I don't use and that don't seem to be
required.

No choice of desktop is presented by gdm when I log in; the default and only
selection is Mate.

This are the portions of gnome I still have installed,  because I use them,
because something that I use appears to require them, or because I haven't
gotten around to removing it.

$ rpm -qa | grep gnome
gnome-devel-docs-3.8.1-2.el7.noarch
gnome-icon-theme-legacy-3.8.2-3.el7.noarch
gnome-menus-3.8.1-4.el7.x86_64
libobasis4.3-gnome-integration-4.3.3.2-2.x86_64
gnome-schedule-2.2.2-1.el7.centos.noarch
libgnome-2.32.1-9.el7.x86_64
libgnome-devel-2.32.1-9.el7.x86_64
gnome-color-manager-3.8.2-6.el7.x86_64
libgnome-keyring-3.8.0-3.el7.x86_64
libgnomeui-2.24.5-8.el7.x86_64
libgnome-keyring-devel-3.8.0-3.el7.x86_64
gnome-python2-gnomevfs-2.28.1-14.el7.x86_64
gnome-settings-daemon-3.8.6.1-9.el7_0.1.x86_64
gnome-desktop3-3.8.4-4.el7.x86_64
gnome-video-effects-0.4.0-6.el7.noarch
gnome-documents-3.8.5-10.el7.x86_64
gnome-dictionary-3.8.0-4.el7.x86_64
gnome-bluetooth-3.8.2.1-3.el7.x86_64
gnome-shell-3.8.4-32.el7_0.x86_64
gnome-keyring-3.8.2-8.el7.x86_64
libgnomekbd-3.6.0-4.el7.x86_64
libgnomeui-devel-2.24.5-8.el7.x86_64
gnome-session-3.8.4-11.el7.x86_64
libgnomecanvas-devel-2.30.3-8.el7.x86_64
gnome-games-3.4.2-2.el7.nux.x86_64
gnome-themes-standard-3.8.4-3.el7.x86_64
gnome-online-accounts-3.8.5-9.el7_0.1.x86_64
gnome-font-viewer-3.8.0-3.el7.x86_64
gnome-icon-theme-3.8.2-3.el7.noarch
gnome-python2-2.28.1-14.el7.x86_64
gnome-keyring-pam-3.8.2-8.el7.x86_64
gnome-python2-gconf-2.28.1-14.el7.x86_64
gnome-user-docs-3.8.2-4.el7.noarch
gnome-icon-theme-symbolic-3.8.2.2-2.el7.noarch
gnome-bluetooth-libs-3.8.2.1-3.el7.x86_64
gnome-clocks-3.8.2-8.el7.x86_64
gnome-terminal-3.8.4-8.el7.x86_64
gnome-python2-canvas-2.28.1-14.el7.x86_64
gnome-vfs2-devel-2.24.4-14.el7.x86_64
gnome-python2-bonobo-2.28.1-14.el7.x86_64
gnome-disk-utility-3.8.2-5.el7.x86_64
gnome-python2-gnome-2.28.1-14.el7.x86_64
gnome-chess-3.10.2-1.el7.centos.x86_64
gnome-calculator-3.8.2-4.el7.x86_64
gnome-vfs2-2.24.4-14.el7.x86_64
libgnomecanvas-2.30.3-8.el7.x86_64


-- 
MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com

Liam O'Toole

2014-Nov-10 20:00 UTC

head link

[CentOS] Non-Gnome desktop

On 2014-11-10, James B. Byrne <byrnejb at harte-lyne.ca>
wrote:> So,
>
> 1. I installed a minimal CentOS-7.
> 2. I then installed epel-release.
> 3. I then installed etckeeper from epel.
> 4. I then ran yum update -y.
> 5. I then rebooted (kernel update).
> 6. I then ran "yum groups install "X Window System"
> 7. I then ran "yum groups "MATE Desktop"
> 8. I then ran startx.
Can you confirm line 7 above? It might be a typo.
>
> Result: Graphical destop wallpaper appears, spinning disc in center for 2-3
> seconds then this:
>
> X.Org X Server 1.15.0
> Release Date: 2013-12-27
--- SNIP ---
> So, what is going one?  Does this Desktop work for anyone else without
gnome3
> installed?  What am I leaving out?  Am I suppose run some sort of X
> configuration program?
>
Try including the session manager in the startx invocation, e.g.,

	startx /usr/bin/mate-session

(Or whaterever the MATE session manager is called. I'm guessing the
above by analogy with gnome-session.)

-- 

Liam

Possibly Parallel Threads

Search for more possibly parallel threads

CentOS - Nov 2014 - Non-Gnome desktop

[CentOS] Non-Gnome desktop

[CentOS] Non-Gnome desktop

[CentOS] Non-Gnome desktop

Possibly Parallel Threads