similar to: USB Connected Voice Recorders

Am attempting, so far without success, to access an Olympus Digital Recorder. It is connected to my PC by USB cable but is not recognised in Linux. Olympus do not provide software for Linux use. Have installed Digital Wave Player, the windows program supplied by Olympus, in Wine and have had a USB drive installed in Wine Configuration but when I run Digital Wave Player there is no communication

Usage: usbversion=1|2|3 (default=0, no usb controller defined) Specifies the type of an emulated USB bus in the guest. 1 for usb1, 2 for usb2 and 3 for usb3, it is available only with upstream qemu. The old usb and usbdevice parameters cannot be used with this. Changes from v6: - now usbversion cannot be used with usb and usbdevice parameters - now default is 0 (no usb controller defined) Will be

Hi Folks, CentOS 5.5 x86_64 Asrock-Board with 2 USB3 plugs. Normally USB3-drive is detected. But occasionaly after "umount" next time this drive or other ones will not be detected. I have to boot the PC - than it works - till next unrecognition. On USB2 plugs all works correct. No messages in /var/log/messages nor dmesg. What happens here? Board failure - or other reasons? Some

Always Learning wrote: > >> Used a VCR or Cassette Player lately? > > My VCR broke. Replaced it with a DVD/HDD & USB3 unit. Replaced cassette > player and tape recorders with broadcast quality handheld recorder > DR-100mk3 and an amazingly good Sony PX440. But how do you play all your old VCR tapes? As I said, I want to burn them to disk, but I still have a working VCR.

On Thu, Jan 15, 2015 at 10:18:18PM +0100, Gerd Hoffmann wrote: > Hi, > > > QEMU side is still undergoing polishing, but is already testable. > > Looked art the qemu side for now, commenting here due to qemu patches > not being posted to the list yet (guess that is at least partly already > on your todo list): Absolutely. > * Both legacy and modern should be

On Thu, Jan 15, 2015 at 10:18:18PM +0100, Gerd Hoffmann wrote: > Hi, > > > QEMU side is still undergoing polishing, but is already testable. > > Looked art the qemu side for now, commenting here due to qemu patches > not being posted to the list yet (guess that is at least partly already > on your todo list): Absolutely. > * Both legacy and modern should be

I am running Slackware 10 samba-3.0.5-i486-2 I get the following errors in my syslog, over and over and over... Jul 27 17:05:51 Olympus smbd[11471]: [2004/07/27 17:05:51, 0] rpc_server/srv_pipe.c:api_pipe_netsec_process(1397) Jul 27 17:05:51 Olympus smbd[11471]: failed to decode PDU Jul 27 17:05:51 Olympus smbd[11471]: [2004/07/27 17:05:51, 0]

When I plug in my device which is USB 2.0 into a 3.0 slot (cause that is all I have) [495042.943074] usb 5-2: new low-speed USB device number 6 using xhci_hcd [495043.100076] usb 5-2: device descriptor read/64, error -71 I receive the above error. Is there a flag or setting that tells the USB to in a 2.0 mode ? Thanks, Jerry

Hi all, We are having some problems getting a solaris 9(sparc) file server running samba 2.2.2 to authenticate aginst a windows NT 4 PDC. Let me say first that this was all working at one time, then we had some data corrumption on our NFS mounted /usr/local, and had to restore from tape. Due to some issues with solaris ufsdump and ufsrestore, stuff was not quite put back properly. We do

I replaced my development machine with 6 cores, 32 GB etc. I thought it would be simply inserting the existing HDDs and changing /etc/sysconfig/ifcfg-eth0 but, * in the UEFI "BIOS" USB2 and USB3 work. * in C5.11 USB2 works but USB3 does not. * in C6.5 (my install disk; OS be updated to C6.8) USB2 works but USB3 does not. On both C5 and C6 lsusb shows an entry for the plugged-in

I'm shopping for a small/tiny audio recorder, the kind for recording in a class, interviews, etc... not really music, just voice. Per usual, a lot of these write their audio files in some Windows format, e.g., WMA. As a confirmed Linux guy, I'd want to offload the audio files in some format that Linux can read/play natively. I've read a sketchy suggestion that there's a Linux

Hi, I have an IBM xSeries server... and the digium card is sharing IRQ with USB and giving me crackling audio. >>> cat /proc/interrupts >>> >>> It brings up these results: >>> 0: 10566547 IO-APIC-edge timer >>> 1: 9 IO-APIC-edge i8042 >>> 2: 0 XT-PIC cascade >>> 8: 1

If you have any of the devices listed below, please test with a recent -stable or -current. They will stop working in 4.9 and 5.2 although old behavior can _temporarily_ be enabled by adding "options DA_OLD_QUIRKS" to your kernel config. If I don't hear from anyone, they'll be going away permanently after the releases. -Nate #ifdef DA_OLD_QUIRKS /* Below a list of

On Aug 6, 2019, at 7:04 AM, Stephen John Smoogen <smooge at gmail.com> wrote: > > On Mon, 5 Aug 2019 at 19:49, Warren Young <warren at etr-usa.com> wrote: > >> On Aug 5, 2019, at 11:25 AM, Stephen John Smoogen <smooge at gmail.com> >> wrote: >>> >>> On Mon, 5 Aug 2019 at 13:17, Jerry Geis <jerry.geis at gmail.com> wrote:

I get the following: wine start Olympus/setup.exe fixme:exec:SHELL_execute flags ignored: 0x00000100 jwl at blackie:~$ err:ntdll:RtlpWaitForCriticalSection section 0x7bc9fc44 "loader.c: loader_section" wait timed out in thread 001f, blocked by 001e, retrying (60 sec) err:seh:raise_exception Unhandled exception code c0000194 flags 0 addr 0x7bc3549f When it starts up I see a small window

All, The attached script is causing the following error message ... bash-3.00# ./zmon_bug.d dtrace: error on enabled probe ID 2 (ID 4394: fbt:genunix:copen:entry): invalid address (0xfd91747f) in predicate at DIF offset 120 dtrace: error on enabled probe ID 2 (ID 4394: fbt:genunix:copen:entry): invalid address (0xfef81a3f) in predicate at DIF offset 120 Any ideas? thxs Joe --

After saving a particular VM running WinXP, any attempt to resume it (even when no other VM's are running) generates the following error: olympus ~ # virsh restore /var/lib/libvirt/qemu/save/WinXP.save error: Failed to restore domain from /var/lib/libvirt/qemu/save/WinXP.save error: internal error: Failed to reserve port 5908 This started sometimes towards the end of last year with only the

Hi All, Scientific Linux 7.2 # rpm -qa \*kvm\* qemu-kvm-1.5.3-105.el7_2.3.x86_64 pcp-pmda-kvm-3.10.6-2.el7.x86_64 qemu-kvm-common-1.5.3-105.el7_2.3.x86_64 libvirt-daemon-kvm-1.2.17-13.el7_2.3.x86_64 Question: when I set "Controller USB" to "USB3", what USB3 driver do I use to install Window 7? Many thanks, -T -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Computers are like

Hello, We recently upgraded to the latest Samba3 version v3.0.23c. If the Samba system and the AD belong to the same domain, I am able to perform a 'net ads join' by supplying either a 'Domain Admins' or a 'Domain Users' credential. However if the Samba system and the AD belong to different domain, I can perform the 'net ads join' by supplying a 'Domain

On Fri, Mar 13, 2015 at 12:35 PM, Daniel P. Berrange <berrange@redhat.com> wrote: > On Fri, Mar 13, 2015 at 10:32:14AM +0100, Dominique Ramaekers wrote: >> Dear Daniel, my XML's: >> >> Note: It seems I was to quick, the Windows 8.1 isn't fixed... >> >> Windows Server 2015 R2 >> >> <domain type='kvm' id='146'> >>