similar to: Save VGA console log

Hi I am running a pxe diskless node in f13 and I have some proposals to make ovirt-early working in this version. nash is no more available (nash/mkinitrd is replaced by dracut), so this following command fails : "echo "network --device $DEVICE --bootproto dhcp" | nash" it makes the network configuration incomplete. I replace the linuxrc command by dhclient and it's

Hi, I am trying to boot syslinux with an SD-Card on COMe-mBTi10 board, it works perfect with syslinux 4-06(as BIOS supports booting from SD-CARD), but hangs with syslinux-6.03 during 'Loading vmlinuz ... '. I tried various ways in which I could debug but no hints, just one time I got the error below the loading screen. 'Loading vmlinuz0 ... CHS: Error 8001 reading sector 34(0/3/3)

Hi, Trying to get vga console and a serial console to both work. I can get either one to fully work but not both. When using serial, I do still get a login prompt on the vga, But not all the boot up output. Seems like half to the vga and the rest to the serial port I added lines to /etc/inittab # console port T0:12345:respawn:/sbin/agetty -L ttyS0 115200 And added to /etc/lilo.conf

I''m trying to run Xen on Arch Linux with UEFI boot. I followed the steps for Xen in the Arch Linux Wiki https://wiki.archlinux.org/index.php/Xen I get the following when attempting to boot: Loading Xen 4.2.2 ... WARNING: no console will be available to the OS Loading Linux linux ... Loading initial ramdisk ... Unfortunately there is no console so I cannot determine what has gone wrong,

On Tue, May 20, 2008 at 6:55 AM, Keir Fraser <keir.fraser@eu.citrix.com> wrote: > Hey, I''m not on xen-users. Please post a new thread on xen-devel with a > clear explanation of the problem for those who haven''t seen the xen-users > context. ok. $$$ sez i get barked at for cross-posting ;-) > On 5/17/08, snowcrash+xen@gmail.com

This is most exceedingly weird boot/shutdown sequence that I used once, and can't find a way to adapt to initramfs. Since you guys are trying to adapt all mechanisms that use initrd to using initramfs, this should interest you. initrd has (all binaries static): /bin: init halt mount poweroff pivot_root reboot sh umount /etc: fstab haltrc /dev: null zero tty tty0 tty1 console->tty0 hda1

I used to upgrade samba3 to samba4 with almost successful with one problem, administrator can't access. As administrator, by default it is the only user account that is given full control over the system. My query is how to change the administrator password? we have one account which can join to the samba 4 AD based on the migrated data but the problem can't change the administrator or

Hi, I''ve installed xen-2.0.5 from source on gentoo, but the xen dom0 kernel doesn''t find the root device: ############################# snip ###################################### Kernel panic: VFS: Unable to mount root fs on unknown-block (3,3) ############################# snap ###################################### grub.conf: ############################# snip

Harcoding default content of initramfs in the gen_initramfs_list.sh script seems ackward. Move it to a file named: usr/initramfs.default This also fixes a small bug when no arguments was passed to CONFIG_INITRAMFS_SOURCE (-d was passed twice to the script) Idea and bug report from: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> ---

Dear List maybe a simple question. We have a pxelinx server in our network which only sent the output on a serial console. Now we want both output on VGA and serial console. I think pxelinux redirect the output default on VGA. So I think the only changes I have made is to add "tty0" into the "label" section in the "default" file. Is this correct? Mit freundlichem

Generate dependencies almost like done by fixdep in the kernel. This teaches make to rebuild cpio image when content has changed. Also restructured usr/Kbuild a little so we better utilise parallel makes (dash, gzip, utils and kinit are now build in parallel). Signed-off-by: Sam Ravnborg <sam@ravnborg.org> --- patch is on top of hpa's linux tree, so path differ if applied to the klibc

Hey all, I've downloaded the latest CentOS 5.0 and the md5sums look good. I loop-back mounted the ISOs and pulled all of the RPMs out into a single dir. I have an existing PXE environment with several different distros to which I added 5.0. RPMs are served from my HTTPS server. I used the isolinux.cfg that was provided and all *looks* good. The problem is that on 4 *very* different

Hi, First of all thank you so much for your prompt suggestions/help. I really appreciate this. Here is the syslinux.cfg which works perfect with syslinux-4.06 ---- PROMPT 0 TIMEOUT 50 SERIAL 0 DEFAULT mylabel LABEL mylabel KERNEL vmlinuz0 APPEND initrd=initrd.img root=/dev/mmcblk0p2 rootwait rootfstype=ext3 console=tty0 console=ttyS0,9600 ---- To further round off the error possibilities I used

Fix usr/Kbuild so it utilise the new gen_initramfs.sh script which will rebuild initramfs when the content has changed. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> --- usr/Kbuild | 74 +++++++++++++++++++---------------------------------------------- 1 file changed, 22 insertions(+), 52 deletions(-) This patch shall not be applied until my kbuild.git tree is merged upstream. Or it

Alle, After upgrading from 6.4 to 6.5, our serial console configuration non longer work. We have the following upstart file: [cwfox at hilo ~]$ cat /etc/init/ttyS0.conf # ttyS0 - agetty # # This service maintains a agetty on ttyS0. stop on runlevel [S016] start on runlevel [23] respawn exec agetty -h -L -w /dev/ttyS0 115200 vt100 [cwfox at hilo ~]$ And the following in /etc/securetty:

gen_initramfs_list.sh failed to generate a dependency list when it was supplied the -d option. Restructured gen_initramfs_list.sh to support dependency info with -d. This also fixes a bug where we did not properly process when more than one dir was specified. Finally update dependency info for the -d case (list_default_initramfs) In usr/Kbuild remove "" around CONFIG_RAMFS_SOURCE so the

let''s try this with a shorter subject, which was originally this, which probably tripped the list-admin-approval triggers.... Xen 3.2 Debian 2.6.18 on Dual Xeon with Remote Serial access - grub.conf config advice needed the subject says it all - anyone who knows the answer can stop reading and hit "send" with a few lines of grub.conf - however, for those people who are bored,

Basic infrastructure for building klibc. Signed-off-by: H. Peter Anvin <hpa at zytor.com> --- commit 5bba564a5c133369b3e83e5827d053a98cb3c59a tree 11f2acc1f9d845e8764fa790f522b79ea1106b80 parent 378abd8f4d39024ea6c87eb5b54155238f647f0d author H. Peter Anvin <hpa at zytor.com> Sun, 25 Jun 2006 16:58:08 -0700 committer H. Peter Anvin <hpa at zytor.com> Sun, 25 Jun 2006 16:58:08

Hey Guys ! I am trying to install Xen 4.0.1 on Ubuntu 10.04 LTS on a 64-bit machine. Basically the issue that I am facing is that when I try to boot up my Domain0, my video display driver crashes and the system simply hangs. I am using an Intel graphics card: $ lspci -v | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) I

CentOS 7 How do I print something on the text-mode console right after the OS has finished booting? I've a virtual instance and I need to know its IP address after it has finished booting up, to know where to ssh into it. I've tried adding "ip -4 addr > /dev/tty0" to rc.local, but that obviously doesn't work, because the login prompt overwrites everything I do. --