similar to: Migrate Win2k3 to KVM

Hi, Here is the XML file of the my VM: <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit SJ-SIMISPC or other application using the libvirt API. --> <domain type='kvm'> <name>SJ-SIMISPC</name>

- What format is the image is? - Can you post an XML file of the VM config? Changing the driver to VirtIO via registry edits may exacerbate the problem. I've never done this but wouldn't it make sense to stick to the more supported IDE drive emulation until you get it booted and thus remove possible variables of it not booting? Are you able to boot the image any other way? On Sat, Jul

Hi, I made a disk image with CloneZilla from the original physical machine. That image was restored on an iSCSI volume. It isn't booting. I got BSOD. I tried IDE, SATA, SCSI disk type without any success. I tried to using virtio driver and if I use my image+W2k3 install CD+virtio VFD the Windows repair console see the disk and I can use the repair console with my image but the windows not

Hi, The error line is: *** STOP: 0x0000007B (0xF789AA94, 0xC0000034, 0x00000000, 0x00000000) Nothing more! (Of course there are some inrelevant text line about chkdsk, etc.) > Basically, what's required is the "STOP:" line + the image where it > fails (so, the line below). Image being likely to be NTOSKRNL.EXE > Nothing about NTOSKRNL.EXE on the blue screen! > >

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Having the BSOD value (first ID) should provide intel about what's getting wrong in your setup. It's likely that your storage stack is incomplete in your setup due to hardware change for HDD, and thus, Windows cannot find its boot device any longer. Reading this KB might help: https://support.microsoft.com/en-us/kb/314082 Once you get

Hi, Do you need the exact error message (the codes)? I don't want Virtio. I want to boot my image first. As I mentioned I can't use the mergeide.req on the physical machine but I can do anything with the image (if I don't het error messages from the virt-win-reg). I don't know if my restore to iSCSI volume was perfect. There wasn't any error messages and the imag is able to

Hi Pierre, I'm here now: root@amd1:/mnt1/WINDOWS/system32/config# chntpw -e SAM system security software chntpw version 0.99.6 110511 , (c) Petter N Hagen Hive <SAM> name (from header): <on1\WINDOWS\system32\config\sam> ROOT KEY at offset: 0x001020 * Subkey indexing type is: 666c <lf> File size 262144 [40000] bytes, containing 8 pages (+ 1 headerpage) Used for data:

Hi, Is that possible? If I start in normal VGA mode I can see yellow ! next to the 2nd and 3rd QXL card and Win complains about can't start (Code 10). If I want to change the normal VGA resolution in a higher res (for example 800x600) I got black screen in virt-manager. I use SPICE protocol (for more screens). Any solution? W2k3 R2 Ent. Ed. SP2 TIA, Ruzsi

Hi Pierre, On 11/07/2015 20:01, Ruzsinszky Attila wrote: > > The error line is: *** STOP: 0x0000007B (0xF789AA94, 0xC0000034, > > 0x00000000, 0x00000000) > > Perfect, this is what was expected. This should be easy to fix. > Good news! ;-) > Great, then, it opens possibilities. Let's try the following: > - - Install chntpw > Is that a Linux program? I use

Hi, I want to use nut-cgi from a centralized machine. There are two firewalls which run upsmon. upsmon connected to the real upsd which run two machines behind the firewall. So upsmon is using LAN for communicating to upsd. First problem: I can't connect to upsmon with upsstats.cgi because upsmon not listen on TCP port. Second problem: How can I check more upsd with upsmon? All upsd are

On Sat, Jul 11, 2015 at 9:28 AM, Ruzsinszky Attila < ruzsinszky.attila@gmail.com> wrote: > Hi, > > Do you need the exact error message (the codes)? > > The error message "No system disk" means the disk is booting from a KVM perspective so no. > I don't want Virtio. I want to boot my image first. > You already have it seems like. > As I mentioned I

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Regarding product activation, there's nothing I can do. You've to call Microsoft to re-activate your W2k3 licence. This is due to hardware change on virtualization. Regards, On 25/07/2015 20:54, Ruzsinszky Attila wrote: > Hi Pierre, > > I think the boot is working! ;-) I changed my image to IDE disk and > W2k3 started

Hi folks, Warning: I don't know if the result I am getting makes sense, so this may be a statistics question. The fitted values from my binomial lmer mixed model seem to consistently overestimate the cell means, and I don't know why. I assume I am doing something stupid. Below I include code, and a binary image of the data is available at this link:

On Wed 5/5/2010 3:28 AM Miller, Shao wrote, ---------------------------------------------- Good day again Matthew, As per (c=80) * (h=2) * (s=48) * (sect_size=512) = 3,932,160 bytes = 7,680 sectors: For Windows, you might enjoy: - "DD for Windows" by John Newbigin and chrysocome[1] - "ImDisk Virtual Disk Driver" and "Zero and Random Device Driver" by Olof

I search for long time to make works ghost floppy image "out of the box" with syslinux without success. The only solution i found is to modify the the file generated by ghost boot wizard. the ghost boot wizard generate a "file.sys" i made (with the help of irc helper) a script to modify this file : you have to put the file.sys without extension as parameter #!/bin/bash

Does someone know where I could get my hands on an ima that's larger than 2.88meg... I use winimage for all my ima's and stuff but i'm having trouble configuring a custom size. If anyone has a large ima I could utilize that would be great, preferably one fitting this memdisk supported size: 3,932,160 bytes (3840K) c=80 h=2 s=48 3.5" DSED (extended) If not instructions on making

Hello All, I have About 40 Bootable Floppy Images and would like to operate using "200MB.vfd" * Created "swd200MB.vfd" * * When Booted , passes the Remark > "No Default or UI configuration directive found! * * Requested to provide the Procedure to follow. Prof. S W Damle

Here is a P2V challenge I could use some advice with. I have a source Windows 2003 physical machine that was upgraded several years ago from Windows 2000. So its system is at C:\WINNT instead of C:\Windows. The target is a RHEV VM. Booting the source machine from the virt-p2v CD and trying virt-p2v-server fails apparently because the Windows directory is c:\WINNT. What about the

Hi, I am the guy who puts together the virtio-win package for Red Hat. I recently took over this role so I'm still in learning mode. On Wed, Oct 28, 2015 at 04:15:06PM +0200, Yan Vugenfirer wrote: >> On 28 Oct 2015, at 13:53, Roman Kagan <rkagan@virtuozzo.com> wrote: >> On Wed, Oct 28, 2015 at 12:10:19PM +1100, Vadim Rozenfeld wrote: >>>>>> To sum up, the

Hi, It is becoming a bad habit for big OEM vendors to sell computers & servers without floppy drives. Unfortunatly both Windows and Linux (RedHat) need a floppy drive to load storage drivers etc. during installation. This is what I was thinking: Use ISOLINUX and MEMDISK to load a floppy image of a driver disk into memory as a viritual floppy drive "A:"/"/dev/fda" And then