similar to: TV cards

Dear All, Can anyone recommend a TV-tuner card that works well on 4.x or 5.x Thanks in advance Regards Dmitry

Hi all, Thought I''d share my success with VT-d. I picked up an Asus P5E-VM DO motherboard as it was relatively cheap and had an extra PCI slot compared to the Intel Q35 board. The people on #xen IRC were very helpful. I wasted 2 days trying to get things working on Ubuntu and OpenSUSE with forward patched versions of Xen for newer kernels. Ended up using CentOS 5.1 which has the requred

I'm looking for the highest performance 2d/3d video card that is supported out of the box by Centos 4.2 with open source drivers. I would need for both 2d and 3d to work. No tv tuner, tv in, tv out etc. is needed. I think my best candidate would be a 9800 series radeon. Any comments? Thanks, Steve

Hi List, Does anyone know of any type of radio tuner software available for CentOS in either 32 or 64-bit versions? The card is an ATI X600. I've got the video driver from ATI installed, but they do not have any other user level software available. I think I remember reading something about some software being available for the BT chipset, but I'm a tad out of date on that.

There are three optional ways to watch satellite tv on your pc (http://www.buydvb.net/blog/how-to-watch-satellite-tv-channels-on-computer.html), we?ll explore on this page, you can choose the most suitable way for yourself. Option 1: Connect a satellite dish directly to your PC Option 2: Connect your satellite box to a PC Option 3: Watch satellite TV channels over the Internet Option 1: Direct

I have a Dell Inspiron 8100 laptop (or I8K) with a NVidia Geforce2 Go (or NV11) with an embedded CH7007A chip, and am seeing the following after getting ch7006 kernel driver/module loaded: # dmesg |grep ch7006 -i --- Snip --- [ 21.191147] nouveau [ I2C][0000:01:00.0] detected TV encoder: ch7006 [ 21.404731] ch7006 1-0075: ch7006_probe: [ 21.411672] ch7006 1-0075: Detected version

Hi All, This might be a stupid question, but I have two PCI devices that I want to pass-thru to a PV domU. I can pass one of them, but not both. I''m sure it''s a stupid syntax issue within my configuration file. When I do a "lspci" in the domU, (CentOS 5.1), only one of the devices shows up. (e.g.) 00:00.0 Multimedia video controller: Internext Compression Inc

Hello, Jeremy: See the included patch. If it''s OK it''d be nice to get it into xen/stable-2.6.32.x branch. Thanks Nathanael! -- Pasi ----- Forwarded message from Nathanael Rensen <nathanael@polymorpheus.com> ----- From: Nathanael Rensen <nathanael@polymorpheus.com> To: Pasi Kärkkäinen <pasik@iki.fi> Cc: n_iwamatsu@jp.fujitsu.com Date: Mon, 3 Jan 2011

On Thu, Aug 30, 2012 at 6:33 PM, Konrad Rzeszutek Wilk <konrad@kernel.org>wrote: Hi, > > I''ve just upgraded a server of mine from a Core i3 2100T to an i7 3770, > in order > > to do full virtualization with VTd. > > > > I''m using kernel 3.5.2 and Xen from git://xenbits.xen.org/xen.git @ > commit > >

Hi, I have played previously with VMWare and HyperV based solutions for virtualization but not with Xen so forgive me if this question has an obvious answer or has been asked before. Google has not provided me with an obvious answer on this so... I have a home pc with a tv tuner card in it which I was hoping that after setting up Xen I could map that piece of hardware to a specific virtual

Hi, i'm trying to get my VIA Epia with VIA Rhine ethernet device to boot PXELinux. I have done this before, but now i can't get it to work. The machine loads pxelinux.0, i see some messages. But it fails just after trying reading the first config file (the one with the mac address). It kinda says this (transcribed): CLIENT IP: 192.168.1.23 MASK: 255.255.255.0 DHCP IP: 192.168.1.93

https://bugs.freedesktop.org/show_bug.cgi?id=39866 Summary: Incorrectly detects Analog outputs as TV out on Apple Cards Product: xorg Version: git Platform: PowerPC OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at

I ran into a problem with "subset" while working at home that I am not sure is a bug or not. I defined a custom function to take a data frame of tree positions, sizes, and types (containing the columns TRT, COMP, PLOT, X, Y, DBH and CON) and wanted to make a stem map of the plot using different symbols and colors to represent the different types of tree stems. I copied a bit of the

On Fri, Feb 02, 2018 at 09:38:17AM +0000, Nux! wrote: > Is it a Realtek chipset? yes it is. > I've had problems with it on CentOS as the system will load up the DVB drivers (for TV tuner) thus interfering with the SDR. > What worked for me is blacklisting them & reboot. Give it a try. Ah, thanks, that's the trick. works now. > > cat

Hi All, So I''ve got a DVB-S PCI Express card ($30 USD Twinhan AD-SE200 off eBay) that''s being passed via VT-d/pciback in Xen 3.2.1 under CentOS 5.2 to a Windows XP SP3 which works! ... except for one small issue... Motherboard is an Intel DQ35JO that much people has had success with and an Intel E8400 CPU. The issue is that when dealing with FTA MPEG-2 transport streams (DVB-S

My tuneR sawtooth wave function generator is broken. When I use the sine function, I get exactly what I expect: a sine wave whose frequency is defined by the freq parameter. In particular, higher frequencies have shorter wavelengths (more cycles per second means shorter waves). When I create a sawtooth wave, the opposite seems to occur: higher frequencies result in longer waves. But that?s not

Hi. I'm trying to export a .wav file using the writeWave function from tuneR package in a different folder than the default getwd(). After reading through the manuals of some audio packages I couldn't figure it out. I'm picking one 3-hour .wav file and asking the function to take a sample of 1 minute (from minute 100 to minute 101 of the 3-hour file) and saving it in an object

Ccing the maintainer if the tuneR package. Looks to me like sawtooth (and square) don't behave as expected when using xunit="samples". Workaround is to use xunit="time" instead: sawtooth(110,duration=1/100,samp.rate=sample_rate,xunit="time") I looked at the code but found it to be opaque. -- Sent from my phone. Please excuse my brevity. On November 12, 2017

Looking for a radio tuner for my audio server. Needs to do AM. Any hardware reccomendations? -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - - Jason Pyeron PD Inc. http://www.pdinc.us - - Principal Consultant 10 West 24th Street #100 - - +1 (443) 269-1555 x333

https://bugs.freedesktop.org/show_bug.cgi?id=54681 Bug #: 54681 Summary: Connecting TV to second DVI port of 9600GT card causes GPU lockup and Xorg crash Classification: Unclassified Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: