similar to: [Bug 108047] New: No recognition of DVI-D monitor

On Sun, Sep 23, 2018 at 12:26 PM, Wolfgang Rißler <wolle321 at freenet.de> wrote: > I try to send a friendly ping to my problem. > At the moment I'm running at 1600x1200 (monitor than has 1600x1200 > too), what looks better then 1920x1200 picture on that Monitor with > 960x1200. > I cant get 1920x1200 working, but I'm shure, that the monitor has this > native

Hello , I'm new here but I hope I can describe my problem exactly. I'm trying to get my DVI-Monitor to work with nouveau. The monitor is automatically reported as not connected. LVDS is detected. Forcing it on Xorg.conf didn't work, KMS does: video=DVI-D-1:1920x1200e video=LVDS-1:d X started with 1024x768, but could switch by xrandr to 1920x1200. The viewed picture now is

Am 05.01.2016 um 11:41 schrieb poma: > > append to kernel cmdline: > drm_kms_helper.edid_firmware=DVI-I-1:edid/edid.bin > > $ cat /proc/cmdline > ... drm_kms_helper.edid_firmware=DVI-I-1:edid/edid.bin ... > Well, no banana. Yes, the kernel loads the edid, but the screen keeps blank if I switch the monitor to the system after bootstrap. )-: [ 20.319271] [drm] Got

Hi folks, I don't seem to be able to enable the DVI-I output of an old FX 5200 behind a KVM switch. Autodetection works fine if the FX 5200 DVI output is switched to the monitor, but when it is not, I have not found a way to force-enable it. Here is what I tried: *) used the video=DVI-I-1:1280x1024-24 at 60e kernel parameter (framebuffer still sits at 1024x768) *) used "options

https://bugs.freedesktop.org/show_bug.cgi?id=69083 Priority: medium Bug ID: 69083 Assignee: nouveau at lists.freedesktop.org Summary: using DVI to VGA adapter for CRT and specifying supported "PreferredMode" >EDID preferred mode, screen output is compressed into small fraction of top scan

Am Sonntag, den 23.09.2018, 12:55 -0400 schrieb Ilia Mirkin: > On Sun, Sep 23, 2018 at 12:26 PM, Wolfgang Rißler > <wolle321 at freenet.de> wrote: [snip] > > That's not extremely surprising ... force-enabling an output I think > might kill the resolution detection, and 1024x768 is the default. Why > are you force-enabling/disabling video outputs? That should not >

Am Freitag, den 07.09.2018, 22:11 +0200 schrieb wolle321 at freenet.de: > Hello , > > I'm new here but I hope I can describe my problem exactly. > > I'm trying to get my DVI-Monitor to work with nouveau. The monitor > is > automatically reported as not connected. LVDS is detected. Forcing it > on Xorg.conf didn't work, KMS does: > >

https://bugs.freedesktop.org/show_bug.cgi?id=43939 Bug #: 43939 Summary: DVI monitor connected via HDMI is blank / standby (NV96 / 9500GS) Classification: Unclassified Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal

For an unknown reason both my monitors ended up with a corrupted EDID. They both provide VGA and DVI input. The VGA input works fine, while DVI is broken because of the EDID issue. Using these [1] instructions I have been able to read the EDID and fix it. Unfortunately I'm not able to write it back to the eeprom. I always get this message: i2c i2c-1: sendbytes: NAK bailout. This is what I

Hi List, I'm stuck how to get a dual head monitor solution to work with Nouveau, running openSUSE 13.1 on my hp8710w mobile workstation equipped with a Nvidia graphical card. Beyond the built-in WUXGA display, an external WQHD monitor is connected to the HDMI port on the graphical card and/or to the dual link DVI-D on a hp docking station. To compare with SLED11/Nvidia driver running in

I have a Dell 2007FP monitor. NV43 (GeForce 6600) can not use the native resolution. 1600x1200 is listed under "DDC gathered Modelines" with the rest of the info, but then is missing from "probed modes". I have a secondary card, NV4a (GeForce 6200, PCI). It works with this card. This card does not show "DDC gathered modelines" at all, and 1600x1200 is listed

https://bugs.freedesktop.org/show_bug.cgi?id=89571 Bug ID: 89571 Summary: XFX 7300 GS - Black screen with DVI when KMS(nouveau) starts - VGA working Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: All Status: NEW Severity: blocker Priority: medium

I have a Gigabyte GeForce 1050 connected by DVI to a monitor (1920x1200 resolution @ 59.9502 Hz) and a TV via HDMI (3840x2160 @30 Hz). The problem is the TV used to work at 59.9685 Hz but then it started showing "No signal" on the TV. I was changing settings trying to get it to work again and I happened to change it to 30Hz and it worked. The specs are here:

https://bugs.freedesktop.org/show_bug.cgi?id=30589 Summary: Dual screen connected with VGA works, but not with DVI on G94 [GeForce 9600GT] Product: xorg Version: git Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau

Hi, > > Try your luck here > http://lists.freedesktop.org/mailman/listinfo/dri-devel The major problem is that there is no way to tell the nouveau kernel module to enforce a specific output. There is a video=XXX kernel parameter, but this only applies to the VGA framebuffer but not to the nouveau framebuffer. > BTW what is actual KVM switch device, vendor/product? This is an

These patches are adding support for outputting 2560x1440 at 56 over HDMI. This needs a pixel clock of 225 MHz which was not supported before. This was tested in a dual monitor setup with a GF114 (GTX 560 TI) and one HDMI monitor running with 2560x1440 at 56 and one DVI monitor running with 1920x1200 at 60. This still needs testing on other graphics cards and with dual link DVI. There is no

https://bugs.freedesktop.org/show_bug.cgi?id=54681 Bug #: 54681 Summary: Connecting TV to second DVI port of 9600GT card causes GPU lockup and Xorg crash Classification: Unclassified Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity:

https://bugs.freedesktop.org/show_bug.cgi?id=29820 Summary: Nouveau doesn't handle VGA-OUT correctly on a 9400M (Macbook Unibody), but DVI-OUT works !?!?! Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium

I guess the DVI adapter is passive. $ xrandr --props Screen 0: minimum 320 x 200, current 4480 x 1440, maximum 8192 x 8192 XWAYLAND1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 290mm ??? non-desktop: 0 ??? ??? supported: 0, 1 ?? 1920x1080???? 59.96*+ XWAYLAND4 connected 2560x1440+1920+0 (normal left inverted right x axis y axis) 600mm x 340mm ??? non-desktop:

------------------------ From: Efrem Mc <efremmc2 at gmail.com> Date: Tue, 1 Mar 2016 00:27:52 -0500 > 'Normally, the monitor-edid, can report the options as well as the > journalctl -k on boot. I have a GTX 960, and it has a DVI-I, DVI-D, > DP 1.2, HDMI, and it names the ports as follows, DVI-I as > (DVI-I-1/DFP-0, DFP-1 (HDMI-1), DFP-2 (DVI-D-1/DFP-2), and for the >