similar to: GP106M+Intel Skylake, Kernel 4.10-rc3 : No display on HDMI or DP

On Wed, Jan 11, 2017 at 4:48 AM, Sylvain Fabre <sylvain at lahiette.com> wrote: > Hi all, > > > > On my recent MSI Apache Pro laptop with Intel Skylake + GP106M Nvidia chip, > i am unable to use the external HDMI and DP outputs. The outputs are > available thru xrandr and can be activated, but the connected monitors > always show a black screen. > > > >

> > OK, so I think that these are not the HDMI/DP outputs connected to > your secondary device. They are the ones connected to your primary > device (might not be pinned out, or might only be available via an > optional dock). Normally there'd be an extra -1- in the name of such > outputs. But who knows with modesetting - perhaps it doesn't stick > that in and sticks

> > No, that line is actually expected (just means accel won't work, since > NVIDIA hw now requires signed firmware, but they won't release the > ctxsw fw). Are you absolutely sure that you're seeing the outputs in > xrandr? Could you provide the output of xrandr as well as an Xorg log? > > Thanks, > > -ilia Many thanks for you help. All data below :

On Thu, Jan 12, 2017 at 3:51 AM, Sylvain Fabre <sylvain at lahiette.com> wrote: > xrand > > Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 > eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y > axis) 344mm x 194mm > 1920x1080 60.02*+ 47.99 > 1400x1050 59.98 > 1280x1024 60.02 > 1280x960 60.00

On Fri, Jan 13, 2017 at 10:11 AM, Sylvain Fabre <sylvain at lahiette.com> wrote: > xrandr --setprovideroutputsource 1 0 seems to do nothing, either with a > monitor connected to HDMI-1 or not. The second monitor is detected and > available in the screen configuration tool of KDE, but it remains black, no > window, nothing. > > With a monitor conected in HDMI-1, here are the

We've seen a number of power management and secboot issues with the Pascal-series mobile GPUs. Without a command line it is hard to debug remotely, but see, as one possible example: https://bugs.freedesktop.org/show_bug.cgi?id=100228 Can you try booting with a kernel command line that includes "nouveau.runpm=0" as a debugging step. On Mon, 17 Sep 2018 at 17:46, don fisher <hdf3

I do not know how to debug this situation. Nothing appears in /var/log/messages. I miss the serial port:-( I executed a journalctl -r, and saw an error: kernel: nouveau 00001:01:00.0; Refused to change power state, currently in D3 The last message before reboot was: kernel: watchdog: Bug: soft lockup - CPU#0 stuck for 22s! [ntpd:3265] I have a pair of these Alienware 13 laptops, and would be

https://bugs.freedesktop.org/show_bug.cgi?id=100406 Bug ID: 100406 Summary: [GP106M - Prime] Stall while waking card with DRI_PRIME=1 app Product: xorg Version: git Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: normal Priority: medium Component:

Alienware 17 r5 also with same graphics (GP106M and Intel 3e9b) does boot from same disk. I look in hwinfo --gfxcard and it says both the Intel (on i915) and the Nvidia (nouveau) are both present. What command tells me which driver is being used? Thanks. Don

I had desire for a light laptop, so purchased an Alienware 13. I am currently unable to display on the external monitor, leaving me with the small 13" display. I am ignorant of how to proceed. I assume the Nouveau driver is being used, but am not sure. I it Intel or Nouveau? When I boot the following appears in dmesg: nouveau: detected PR support, will not use DSM nouveau

I just built a linux-4.18.7 kernel from kernel.org for opensuse linux 42.3. When I issued the command "sudo make modules_install install" I received a series of error messages: dracut: Possible missing firmware "nvidia/gv100/sec2/sig.bin" for kernel module "nouveau.ko" dracut: Possible missing firmware "nvidia/gv100/sec2/image.bin" for kernel module

CentOS 6.9 has support for the Haswell processor which is a subset of the Skylake. All Skylake server ancillary components work perfectly with CentOS 6.9. The AST2500 used with the Skylake is very good and will process UHD. However this is not backwards compatible with legacy variants. To make it work an ancillary graphics card is required which is less than $100. This will not break the

Hello, I have a pre-production Intel Skylake server using dual 8176 processors (28 core @2.1Ghz) I have loaded from the DVD distribution CentOS 7.3 and RHEL 7.4 with no problems. When I try and load CentOS 6.9 the boot process hangs just as the Anaconda graphics is started for CentOS configuration. If I use a secondary graphics card then the process completes with no problems and CentOS boots

Hello, I have an Intel NUC6i5 (Skylake i5-6260u processor) running CentOS 6.9 and there are no real problems. However during boot an error occurs in dmesg where a PCH unknown device 0x9d48 is logged. How can I get rid of this error output? Thank you, Mark

You need at least a newer kernel. If you like you can try out http://elrepo.org/tiki/tiki-index.php <http://elrepo.org/tiki/tiki-index.php> With 3.10 I?m personal unsure kernel-lt-3.10.104-1.el6.elrepo.x86_64.rpm <http://elrepo.reloumirrors.net/kernel/el6/x86_64/RPMS/kernel-lt-3.10.104-1.el6.elrepo.x86_64.rpm> But got here centos with 4.11.3 running quiet well.

Hello, There was a support issue with the Intel Skylake and CentOS 6.* where the graphics hardware was not supported. Intel have now come up with a software solution to support the AST2500 graphics hardware on the Skylake. Regards, Mark Woolfson MW Consultancy Ltd Leeds LS18 4LY United Kingdom Tel: +44 113 259 1204 Mob: +44 786 065 2778 --- This email has been checked for viruses by AVG.

We were informed that many people were having issues on newer intel (Skylake) platforms installing the latest CentOS-7 and asked if we could find/fix the problem. We found that the latest kernel, kernel-3.10.0-327.10.1.el7, fixes this issue on some machines, so we rebuilt the installer for people having issues. Please see this mail for the new isos:

Hello Mark, which kernel you use? Sometimes it is only an ?information?. Sincerely Andy > Am 31.05.2017 um 10:00 schrieb Mark (Netbook) <mrw at mwcltd.co.uk>: > > Hello, > > I have an Intel NUC6i5 (Skylake i5-6260u processor) running CentOS 6.9 and there are no real problems. However during boot an error occurs in dmesg where a PCH unknown device 0x9d48 is logged. How

> > > > When I try and load CentOS 6.9 the boot process hangs just as the Anaconda > graphics is started for CentOS configuration. > CentOS 6.9 kernel does not have support for Skylake processors, I believe that there is an alternate arch SIG that "may" be able to compile 6.9 with a newer kernel or you may have to compile something using the kernel that is available

Hi, I have a JIT compiler using the legacy JIT on LLVM 3.5 that, when run on the Xeon v5 Skylakes produces "Cannot select: intrinsic %llvm.x86.sse41.round.sd". Note, this does not occur on i7 Kabylakes. To get this far I had to disable AVX512 code gen. Upgrading the system I am looking at from 3.5 to a later version is a big job that I'd prefer not to have on my critical path.