similar to: nouveau doesn't recognize my hdmi monitor

This xrandr output only represents outputs on your Intel iGPU, not your NVIDIA G98 dGPU. You may find reading http://nouveau.freedesktop.org/wiki/Optimus instructional. Cheers, -ilia On Thu, Dec 29, 2016 at 8:48 PM, Terra Frost <terrafrost at gmail.com> wrote: > I have an ASUS UX50V laptop with a "NVIDIA Corporation: G98M [GeForce G > 105M]" video card. Linux Mint 18.1

I got 1920x1200 at 59.95Hz via DVI and 3840x2160 at 60.00Hz via HDMI at the same time with the proprietary nvidia driver. I get flickering on the 1920x1200 at 59.95 with the nouveau driver (it doesn't flicker if I lower it to 1920x1080 at 59.96). Any idea why? proprietary: $ xrandr Screen 0: minimum 8 x 8, current 5760 x 2160, maximum 32767 x 32767 DVI-D-0 connected primary 1920x1200+0+0

I think I may have updated the tv firmware between when it worked and when it didn't. I wonder it it has to do with bit depth. I use lubuntu and it doesn't let me pick the bit depth so I don't know what it using.

https://bugs.freedesktop.org/show_bug.cgi?id=70389 Dennis Favro <dfavro at gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |dfavro at gmail.com --- Comment #3 from Dennis Favro <dfavro at gmail.com> --- Getting what appears to be a

> > OK, so I think that these are not the HDMI/DP outputs connected to > your secondary device. They are the ones connected to your primary > device (might not be pinned out, or might only be available via an > optional dock). Normally there'd be an extra -1- in the name of such > outputs. But who knows with modesetting - perhaps it doesn't stick > that in and sticks

https://bugs.freedesktop.org/show_bug.cgi?id=94826 Bug ID: 94826 Summary: Cannot set external display as primary in optimus mode Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau

Hi, Distribution: openSUSE 42.2 Beta, Kernel: 4.4. The box is a Dell Precision T7500 with an nVidia Quadro 4000 card and a displayport connected iiyama B2783QSU 2560x1440 monitor identified as DP-1. Problem: The monitor is detected as 1920x1080 and not 2560x1440. See Xorg log file at http://rogerprice.org/Xorg.0.log . There is no file /etc/X11/xorg.conf and in the directory

> > No, that line is actually expected (just means accel won't work, since > NVIDIA hw now requires signed firmware, but they won't release the > ctxsw fw). Are you absolutely sure that you're seeing the outputs in > xrandr? Could you provide the output of xrandr as well as an Xorg log? > > Thanks, > > -ilia Many thanks for you help. All data below :

Hi Ilia, with 'xrandr --output LVDS1 --auto --output VGA-1-2 --auto --left-of LVDS1' it seems to work properly. Thank you. Do you know about a tool which integrates well in Ubuntu? Maybe a GUI for xrandr? The other option would be to use some bash script, which also is okay for me. Just for your information the outputs of 'xrandr -q' and 'xrandr --listproviders': nicolas

On Thu, Jan 12, 2017 at 3:51 AM, Sylvain Fabre <sylvain at lahiette.com> wrote: > xrand > > Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 > eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y > axis) 344mm x 194mm > 1920x1080 60.02*+ 47.99 > 1400x1050 59.98 > 1280x1024 60.02 > 1280x960 60.00

I'm running nut 2.0.1 with an MGE pulsar evolution 3000 with the mge-utalk (serial) driver on NetBSD 3.1 . I had a very strange occurance in my basement datacenter this early AM. the following was logged by upslog: 20080219 023452 100.0 123.0 049.0 [OL CHRG] NA 60.00 20080219 023522 100.0 122.8 049.0 [OL CHRG] NA 60.00 20080219 023552 098.0 123.0 049.0 [OL DISCHRG] NA 60.00 20080219 023622

https://bugs.freedesktop.org/show_bug.cgi?id=90682 Bug ID: 90682 Summary: failed to idle channel 0xcccc0001 then crash Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau Assignee:

Hi there, a few days ago I installed Ubuntu Gnome 14.04 on my Thinkpad W530. It has the following specifications: Intel Core i7-3820QM Intel HD 4000 and nVidia Quadro K2000M 15,6" FHD RGB 1920x1080 I selected "Optimus" in the BIOS settings to activate both graphic cards. After installing the nouveau driver on Ubuntu via 'apt-get install xserver-xorg-video-nouveau' I was

I am running opensuse Leap 15 on an Alienware laptop. When I plug a monitor into the HDMI socket xrandr shows that is disconnected. How can I get the system to send an event or something so it will look and see that a monitor is there. If I cycle power on the computer with the monitor connected both monitors come up connected. The command xrandr --auto does not bring the disconnected monitor

Since commit 39e6c8208d7b ("net: solve a NAPI race") napi has been able to be rescheduled within napi_complete_done() even in non-busypoll case, but virtnet_poll() always enabled interrupts before complete, and when napi was rescheduled within napi_complete_done() it did not disable interrupts. This caused more interrupts when event idx is disabled. According to commit cbdadbbf0c79

Since commit 39e6c8208d7b ("net: solve a NAPI race") napi has been able to be rescheduled within napi_complete_done() even in non-busypoll case, but virtnet_poll() always enabled interrupts before complete, and when napi was rescheduled within napi_complete_done() it did not disable interrupts. This caused more interrupts when event idx is disabled. According to commit cbdadbbf0c79

https://bugs.freedesktop.org/show_bug.cgi?id=99841 Bug ID: 99841 Summary: Switching to VT freezes X only on a dual screen Product: xorg Version: unspecified Hardware: Other OS: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau Assignee: nouveau at

https://bugs.freedesktop.org/show_bug.cgi?id=100139 Bug ID: 100139 Summary: [DRI2][PRIME] nouveau driver cannot find any connected connector Product: Mesa Version: 10.3 Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: normal Priority: medium Component:

So here goes... First some back story -Centos 5 with latest updates as of yesterday. kernel is 2.6.18-238.19.1.el5 -setup is raid 1 for /boot and lvm over raid6 for everything else - The / partition (lvm "RootVol") had run out of room... (100% full, things where falling appart...) I resized the root volume (from 20GiB to 50GiB). This was done from a fedora 15 livecd,

https://bugs.freedesktop.org/show_bug.cgi?id=106994 Bug ID: 106994 Summary: [PATCH] Fix null pointer dereference in drmmode_output_dpms Product: xorg Version: git Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: major Priority: medium Component: