similar to: UPS Reboots when Pi Reboots!

Thank you Roger, I appreciate the response. I'll have to check my commands, I believe I started it with those systemctl commands you provided. What I can say is that oddly enough after completing the server config and after two more reboots a reboot of the Pi doesn't seem to be causing the UPS to reboot anymore. I have a bit more config to do on slave machines tomorrow but after that

Hi, I?m currently setting up a samba Server on a Raspberry PI 4 with an external 8TB HDD. Since this is rather low end hardware, I?m trying to figure out which performance optimizations are still relevant today, since a lot has chanced in the past years and quite a few options are now set by default. The default values seem to work well for Windows but I?m having lots of issues with macOS.

I've searched the listserv archive, to no avail, so I hope I'm not duplicating a previous problem. I am anxious to get this working, so I'm open to uninstalling what I have and starting over. One note which may not be meaningful is that this UPS pre-dates the Raspberry Pi I've got connected to it, and I used to use it with the CyberPower software, which requires logging in with a

On Oct 26, 2020, at 9:01 AM, I wrote: > >> battery.voltage.nominal: 24 > > I don't have the citation handy, but I think another user reported that the battery.voltage returned by the UPS is a constant 24.0 V, regardless of the actual battery voltage. Here's what I was thinking of:

Thanks so much for all the help! It looks like at present I've at least got a working configuration that I need to test and fine-tune, am I interpreting this correctly? On Mon, Oct 26, 2020 at 9:47 AM Charles Lepple <clepple at gmail.com> wrote: > On Oct 26, 2020, at 9:01 AM, I wrote: > > > >> battery.voltage.nominal: 24 > > > > I don't have the

On Sun, 16 Aug 2020, James Fischl wrote: > Thank you Roger, I appreciate the response. I'll have to check my commands, I > believe I started it with those systemctl commands you provided. What I can > say is that oddly enough after completing the server config and after two more > reboots a reboot of the Pi doesn't seem to be causing the UPS to reboot > anymore. I have

Hi everyone, I'm pleased to announce version 0.6.0 of CELT, with many quality improvements. This includes better stereo coupling, better handling of transients, and better handling of highly tonal signals. In addition, packet loss robustness has been improved through the optional use of independent (intra) frames. CELT now supports a larger dynamic range, suitable for encoding 24-bit audio

Charles Lepple writes: > On Nov 12, 2017, at 10:08 AM, Sam Varshavchik wrote: > > > > The HCL has an entry for a Cyberpower model CP1500AVRLCD. Not listed is > the CP1500PFCLCD model, a newer, premium version of the unit; but the HCL > does have an entry for the CP1000PFCLCD model. > > > > Pretty sure that the CP1500PFCLCD will work; but figure I ask if anyone

https://bugzilla.netfilter.org/show_bug.cgi?id=1475 Bug ID: 1475 Summary: Array of addresses wrongly processed Product: nftables Version: unspecified Hardware: x86_64 OS: All Status: NEW Severity: major Priority: P5 Component: nft Assignee: pablo at netfilter.org

Hello, I have a CyberPower CP1500PFCLCD and I'm trying to get nut to see it under OpenIndiana. All search online suggested that it basically can't happen, but I decided to ask again, maybe things have changed since then. The UPS can be seen by the system: # /usr/sbin/cfgadm -lv usb9/1.1 Ap_Id Receptacle Occupant Condition Information When Type

Anyone familiar with Cyberpower's model numbers? I finally got sick of my Tripplite's USB port going south, all the time, so I'm looking to replace it. The HCL has an entry for a Cyberpower model CP1500AVRLCD. Not listed is the CP1500PFCLCD model, a newer, premium version of the unit; but the HCL does have an entry for the CP1000PFCLCD model. Pretty sure that the CP1500PFCLCD

Charles Lepple writes: > still looking for volunteers to test the libusb-1.0 code on FreeBSD and > other systems. On Fedora 27, running commit 2999c95f0: # nut-scanner Cannot load USB library (/usr/lib64/libusb-1.0.so.0.1.0) : /usr/lib64/libusb-1.0.so.0.1.0: undefined symbol: usb_get_string_simple. USB search disabled. There's also a bug in the configure script on 64 bit

Hai, My plan was to release the all of the coming builds of 4.11.1 today.. But... There are still processes building.. So whats new, what is there and what is not there. The 4.11.1 is based on the Debian Testing 4.11.0. My changes. * d/control changes: - Package samba, added acl to Recommends, obligated for member and AD-DC's. - re-enabled trackers to allow spotlight to

Dear NUT users, I have installed OmniOS+ napp-it on a HP Proliant n54l. This box is powered by a cyberpower CP1500PFCLCD ups. I have installed nut thanks to that link: http://wiki.openindiana.org/oi/Network+UPS+Tools+(NUT)+and+NUT+Monitor The issue is that the driver does not load at startup - but it does if i start it as root using upsdrvctl -u root start. Beside the startup driver launch,

[please use reply-all to include the list - the headers are not mangled] On Oct 25, 2016, at 9:53 AM, Tomasz Przychodzie? wrote: > > Hi, > > Another beginner question. I spend hours trying to find the solution for how to configure winnut properly but I' struggling to make it work. I want my QNAP NAS TS-231 to work as a master and send signal to the PC to shut it down during

I'm using Nas4Free, and I'm getting the following message all the time in the Daemon log: usbhid-ups[42466]: libusb_get_report: Unknown Error I'm running Nas4Free 9.2.0.1 Shigawire Driver usbhid-ups Nut Version is 2.7.1 Internal verion 0.38 UPS Info from Nas4Free Manufacturer:CP1500PFCLCD Model:CRCA102*AF1 The model UPS I'm running is a Cyber Power CP1500PFCLCD, other

No one knows anything about this? I've seen some references to this before, but no solutions? If there is more detailed information I can get from command line, please let me know what to run. Thanks! > Message: 1 > Date: Sat, 26 Apr 2014 13:43:11 -0700 > From: Everett Tsang <snufflebear87 at hotmail.com> > To: "nut-upsuser at lists.alioth.debian.org" >

On 12/03/2016 11:46 AM, Charles Lepple wrote: > > If you don't mind sending the full output of "upsc" and "upsrw", we can update the DDL page (it only has "upsc" output for an older version of NUT). This UPS provides some sort of serial number (doesn't match the label) in the device.model (and mirrored at ups.model) variables, so if you want to mask off

On Nov 12, 2017, at 10:08 AM, Sam Varshavchik wrote: > > The HCL has an entry for a Cyberpower model CP1500AVRLCD. Not listed is the CP1500PFCLCD model, a newer, premium version of the unit; but the HCL does have an entry for the CP1000PFCLCD model. > > Pretty sure that the CP1500PFCLCD will work; but figure I ask if anyone knows for sure. > We have a bit of a backlog of HCL/DDL

On 11/12/2017 10:08 AM, Sam Varshavchik wrote: > Anyone familiar with Cyberpower's model numbers? > > I finally got sick of my Tripplite's USB port going south, all the time, so > I'm looking to replace it. > > The HCL has an entry for a Cyberpower model CP1500AVRLCD. Not listed is the > CP1500PFCLCD model, a newer, premium version of the unit; but the HCL