similar to: Low Battery Problems

> *From:* Charles Lepple [mailto:clepple at gmail.com] > *To:* Mike Dillinger <miked at softtalker.com> > *Cc:* nut-upsuser at alioth-lists.debian.net > *Date:* Monday, June 22, 2020, 5:19 AM PDT > *Subject:* [Nut-upsuser] Low Battery Problems > > I’d recommend a battery test. Starting the test via the front panel should be sufficient, or you might be able to do it with

Was /etc/nut/upssched-cmd automatically installed? I don't have it on my raspberry pi. :-( On 2019-04-03 1:54 p.m., Mike wrote: > I figured this out and it is working now.  This fix seems strange to me > and is possibly a bug.  I'm sharing in case it might help others. > > I had to uncomment all of the NOTIFYFLAG statements whether I was > changing them or not. 

Hi I have just purchased a Cyberpower CP1300EPFCLCD UPS. It is not listed in your Compatibility List http://networkupstools.org/stable-hcl.html I am very new to all this but do have a background in IT. I have been retired for 18 years so am a bit out of touch so please excuse if I am a bit fuzzy. I will try my best to explain my issue below. When I plug my UPS into my Synology NAS

Anyone familiar with Cyberpower's model numbers? I finally got sick of my Tripplite's USB port going south, all the time, so I'm looking to replace it. The HCL has an entry for a Cyberpower model CP1500AVRLCD. Not listed is the CP1500PFCLCD model, a newer, premium version of the unit; but the HCL does have an entry for the CP1000PFCLCD model. Pretty sure that the CP1500PFCLCD

This was very helpful for me, thank you! On Sat, Oct 24, 2020 at 9:06 AM Charles Lepple <clepple at gmail.com> wrote: > The easiest way to tell if upsd is working is to run "upsc -l" on the same > system, which will list the NUT UPS names, and then run e.g. "upsc mge" > (replacing "mge" with the name returned by "upsc -l") > Here was the

Charles Lepple writes: > On Nov 12, 2017, at 10:08 AM, Sam Varshavchik wrote: > > > > The HCL has an entry for a Cyberpower model CP1500AVRLCD. Not listed is > the CP1500PFCLCD model, a newer, premium version of the unit; but the HCL > does have an entry for the CP1000PFCLCD model. > > > > Pretty sure that the CP1500PFCLCD will work; but figure I ask if anyone

On Sat, Oct 31, 2020 at 2:42 PM Tim Dawson <tadawson at tpcsvc.com> wrote: > I'm going to guess that since your test runtime of 305 is very close to > the low limit of 300, that's the warning. Not yet a fail, but very, very > close. > I tried setting override.battery.runtime.low = 60 in ups.conf, and waited for the UPS to reach 100% charge, and ups.status to report only

Cyber Power UPS Model LX1500GU *upsc output:* root at freenas:~ # upsc ups at localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 5670 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 24.0 battery.voltage.nominal: 24 device.mfr: CPS device.model: LX1500GU device.serial: QAKGP2000252 device.type: ups driver.name:

On Monday 26 October 2020 09:01:31 Charles Lepple wrote: > On Oct 25, 2020, at 11:52 AM, Robert Stocker <kneadtoknow at gmail.com> wrote: > > Init SSL without certificate database > > battery.charge: 100 > > battery.charge.low: 10 > > battery.charge.warning: 20 > > battery.mfr.date: CPS > > battery.runtime: 15690 > > battery.runtime.low: 300

Arjen, all, I just built and installed network-ups-tools-git-v2.7.4.r161.g7bf209a on Archlinux for a CyberPower CP1350PFCLCD ups. After hitting the FAQ 29. "My USB UPS is supported but doesn?t work!" udev issue because the UPS was plugged in when nut was installed bug, running upsc I get: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS

The Hardware Compatibility List page on our website said to report any omissions in the list to this address. I bought a CyberPower UPS Model *LX1500GU*. It looks similar to the *CP1500AVRLCD*. My intention is to configure it in FreeNAS (FreeBSD). The FreeNAS user guide says it uses NUT to provide UPS support an contains a link to your website for a list of drivers of supported UPS devices. I

Hi all, I am doing some final testing of the libusb-1.0 branch (specifically https://github.com/zykh/nut.git branch libusb-1.0+0.1 @ dfd514e7), and I am running across a regression in usbhid-ups relative to the previous libusb-0.1 code running on FreeBSD. Basically, the master (2.7.4+; c703fa75) code was able to start running as root, drop privileges (usually to uucp, the default for the ports

On Monday 22 June 2020 08:19:15 Charles Lepple wrote: > > On Jun 18, 2020, at 12:39 PM, Mike Dillinger wrote: > > > > ups.test.result: No test initiated > > I’d recommend a battery test. Starting the test via the front panel > should be sufficient, or you might be able to do it with upscmd. from man pi at rpi4:~ $ upscmd -l myups Instant commands supported on UPS

Hey guys, :) recently, I installed Cyberpower PR2200ELCDRT2U, however, I have not managed to get this UPS working with FreeNAS 11, yet. According to compatibility list, PR2200 should work fine, when using powerpanel driver: http://networkupstools.org/ddl/Cyber_Power_Systems/ http://networkupstools.org/ddl/Cyber_Power_Systems/PR2200.html However, when trying to establish a connection between

On Oct 26, 2020, at 9:01 AM, I wrote: > >> battery.voltage.nominal: 24 > > I don't have the citation handy, but I think another user reported that the battery.voltage returned by the UPS is a constant 24.0 V, regardless of the actual battery voltage. Here's what I was thinking of:

> On Dec 3, 2016, at 12:31 PM, Jack McGee <jack at greendesk.net> wrote: >> so this is progress. Thanks! Anything else to check to know it is working as it should? http://networkupstools.org/docs/user-manual.chunked/ar01s06.html#Testing_shutdowns The "FSD" test is more for the NUT logic, which isn't too complicated with only one UPS and one server. If you want to