similar to: upsmon fails to start

On Saturday, 1 September 2018 17:50:13 BST Charles Lepple wrote: > I don’t have the code in front of me at the moment, but my guess is that the > config parser stopped parsing at the “#” character. I suspected a rogue character was being interpreted and used `backticks`, 'single quotes' and then "double quotes", but all failed. I ended up removing the offending #

I've googled and RTFM'ed, but still can't solve this one. I hope you folks can. This affects my entire computer cluster, but let's start simple: I've got a computer running NUT; OS is Scientific Linux 5.5; kernel 2.6.18-274.12.1.el5xen. It connects to an APC SMART-UPS via an APC SmartCard using the snmp-ups driver. It generally works: upsmon will detect if the battery is low

those mails list are from last century but i give it a try ! created : https://github.com/networkupstools/nut/issues/563 Hello all, Trying to run an EATON 850pro via USB on a Debian Stretch Stable. I have letsencrypt certificate installed and working. When trying to manage the EATON device, i got: upsmon Can not initialize SSL context When 850pro is connected via USB, i can: lsusb Bus 009

On Sep 11, 2014, at 10:38 AM, Rob Groner <rgroner at RTD.com> wrote: > I?m still getting the onbattery, online, comm good, comm bad, etc system messages. Clearly there is some default behavior going on. How do I keep these system messages from happening? From http://www.networkupstools.org/docs/man/upsmon.conf.html: "NOTIFYFLAG type flag[+flag][+flag]? By default, upsmon sends

Hi, I cant seem to get my upssched to get called by upsmon. Upsmon -c fsd just shuts down without the message I set or the one in upssched-cmd /etc/ups/upsmon.conf: MONITOR ups6 at localhost 1 <user> <pass> master MONITOR ups8 at localhost 1 <user> <pass> master SHUTDOWNCMD "/sbin/shutdown -h +0" NOTIFYCMD /usr/sbin/upssched NOTIFYMSG

hi: my testing server has two power supply and attach to two ups. one of the ups is connect to the server with usb. my upsmon.conf like below: # for two ups MONITOR ftups at localhost 1 monmaster nutmaster master MONITOR ftups at 10.1.1.2 1 monslave nutslave slave MINSUPPLIES 1 # for early shutdown NOTIFYFLAG ONBATT EXEC+WALL+SYSLOG NOTIFYFLAG ONLINE EXEC+WALL+SYSLOG NOTIFYCMD

Hallo group, I am running openSUSE 10.3 with nut-2.2.0-20 installed. I have configured it as mentioned in /usr/share/doc/packages/nut/README.SUSE. on starting nut using "rcupsd start" i get following: # Starting NUT UPS monitor done Broadcast Message from root at pane (somewhere) at 22:27 ... Communications with UPS myups at localhost

I've built NUT 2.8.0 from source. When the nut-monitor runs: fopen upsmon.pid fails. I'm running as root, upsmon has root:root permissions as well as the other daemons and .conf files. I've tried configuring with and without --prefixpath --prefixaltpath. Is there something I am missing? Please see attached. Dan -------------- next part -------------- An HTML attachment was

I've followed the config setup docs and also the excellent guide from Roger Price. I'm using openSUSE 13.1 and built NUT 2.7.2 from the sources (latest stable). I'm hooked up to a dummy UPS that basically just cycles from fully charged down to about 20% discharged. I was pleased when I started seeing the messages on my screen indicating the UPS was online or on-battery. Given how

Dear Chales, Thanks for your quick reply. I have Raspberry with last Kernel [Linux pi1 3.18.6+ #753 PREEMPT Sun Feb 8 14:47:22 GMT 2015 armv6l GNU/Linux] If <upsdrvctl>, <upsd> and <upsmon> are stopped <nutdrv_atcl_usb> Works well without any error as "Device or resource busy". If I run <upsc> command never receive any value from my ups <upsc ups at

Now I have this in /etc/nut/upsmon.conf (my QNAP NAS wants admin and 123456 or not working) RUN_AS_USER root MONITOR qnapups at localhost 1 admin 123456 master MONITOR qnapups at 192.168.222.252 3493 admin 123456 slave MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG /etc/killpower NOTIFYFLAG ONLINE SYSLOG+EXEC

I have only RS-232 on the box (meanwhile, it was manufactured on march of 2011) Here is my configs: nut.conf: * * MODE = netserver ups.conf: * * [KIN1500] driver = powercom port = notUsed desc = "Powercom KING PRO KIN-1500AP RM" upsd.conf: * * LISTEN 192.168.1.2 3493 upsd.users: * * [monuser] password = xxxxxxxx upsmon master

Hello. I've tried to configure Windows (complete port, Beta): Windows MSI installer 2.6.0-1 with my Powerware 5115 connected via USB port but have no luck. Here is my config files: *nut.conf:* MODE = netserver *ups.conf:* [PW5115] driver = bcmxcp_usb port = notUsed desc = "PowerWare 5115" *upsd.conf:* LISTEN 192.168.1.12 3493 *upsd.users:* [monuser]

Bonjour Openbsd 6.6 - NUT 2.7.4 from source - Eaton Ellipse Pro Installation OK upsc OK upsmon -c fsd OK (shutdown effective) I suppose mistake in upsmon config : # upsmon.conf MONITOR ellipse at localhost 1 upsmon pass master MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -p -h now 'Sylvebarbe killed'" POLLFREQ 60 POLLFREQALERT 60 HOSTSYNC 120 DEADTIME 180 POWERDOWNFLAG

Hi, I have been running nut successfully for a long time with my Debian 11 server. I upgraded my server to Debian 12 today, which upgraded nut also from 2.7.4-13 to 2.8.0-7. I noticed that after upgrade there was a upssched process running and taking 100% cpu time. I checked if there were any changes to configuration file formats with nut upgrade and only differences I noticed were a terminology

P.S.2 Today I experienced something weird. As I was working, the system started a shutdown and did shut down, then the UPS got powered off and then back on - an expected behavior for a power fail situation. However there was no power failure! I ran nut-journal to check what happened: Previous complete boot through shutdown Oct 29 10:09:33 i7 upsdrvctl[1966]: Using subdriver: MGE HID

I've not been able to connect to my ups using NUT 2.7.4 or NUT 2.8.0. 2.7.4 was installed as a package, 2.8.O was compiled from source. I've messed with permissons, everything is root:root and has the approprate read/execute permissons. I've tried two differnt UPS(es) APC & CyperPower. I'm running PI OS (Raspbian) on a Raspberry Pi3 model B. The port 3493 is open (UFW). I can

Hello All, I'm trying to establish a MASTER SLAVE configuration of UPS using NUT Driver. I'm able to shutdown the master after UPS is on BATTERY ( POWER BLACKOUT) .However I'm trying to shutdown the other SLAVE MACHINES BEFORE MASTER. But at the remote side ( Slaves ) shutdown after UPS blackout does not happen. My configuration in Master are /usr/etc/upsd.users

HI in centos: C="/usr/bin/upssched-cmd" here is the output of that file: # more /tmp/NUT.report NUT configuration 2016-05-10 03:02:20 UTC ########### /etc/ups/nut.conf ########### MODE=netserver ########### /etc/ups/ups.conf ########### [cyberpower] #driver = powerpanel #port = auto driver = usbhid-ups port = auto vendorid = 0764 desc = " My main

Hi, I'm using debian sarge on my server and connected a MGE-ups ellipse via the serial port. I searched the internet for the answer, but can't find it. My config files: <upsd.users> [admin] password = pwd allowfrom = 127.0.0.1/32 actions = set instcmds = all [upsmon] password = pwd allowfrom = 127.0.0.1/32 10.0.0.224/32 upsmon master [upsslave] password