similar to: testing shutdown: pc not restarting; and "ups unavailable" messages

> Have you checked the BIOS option "Power on when AC Returns"? Yes, and I have set it to "always on" as opposed to "always off" or "last state". > Does the UPS unit perform a delayed power off some time after the box shuts > down? I have no idea. How would I find out? -------------- next part -------------- An HTML attachment was scrubbed...

Executive summary: I am installing a UPS with NUT on Ubuntu for the first time. I could follow the instructions up to "testing shutdowns" but on executing the recommended command the computer shuts down and never comes back on, contrary to what the instructions suggest. I am also seeing regular broadcast messages on the console that the UPS is unavailable (and in the? syslog that

> It actually occurred to me that I could try this with another (any other) computer here at work, so I did. I set the BIOS to "always on" after power cut. I booted ubuntu. I did "sudo shutdown -h now" from the console. The pc switched off as expected. Then I removed the power cable and then plugged it back in. According to the theory above, this should have caused the

On Wed, 8 Jan 2020, Gene Heskett wrote: > On Wednesday 08 January 2020 06:44:03 Roger Price wrote: >> I am surprised that there is no ups.delay.start for this UPS. > My new APC Smart-UPS_1500 doesn't have it either. Hello Gene, The NUT 2.7.2 "device dump library" entry for the APC Smart-UPS 1500 at https://networkupstools.org/ddl/APC/Smart-UPS_1500.html shows an entry

Dear Charles, thanks for your quick answer and your information! I didn't know there is a difference in the PR-series between old and new. So thanks for this valuable information! usbconfig dump_device_desc shows: ugen0.2: <CyberPower Systems product 0x0601> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (50mA)

> >> I see at http://networkupstools.org/ddl/Cyber_Power_Systems/Value_800E.html that >> the Value 800E does not have variables such as >> load.off.delay - Turn off the load with a delay (seconds) >> load.on.delay - Turn on the load with a delay (seconds) >> >> What does command ? upscmd -l <UPS> ? report? > > I'll try this tonight when

Hi ALL, Powercom Imperial IMP-525AP seems to be fully compatible with NUT. Unfortunately, I can not disable beeper. upscmd -u {NUT_USER} -p {NUT_PASSWORD} powercom beeper.toggle returns *OK*, however, ups.beeper.status=enabled Thank you, Sergey ========== Additional info: 1) $ upsc powercom battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 30 battery.date: 2010/01/01

Hey guys, :) recently, I installed Cyberpower PR2200ELCDRT2U, however, I have not managed to get this UPS working with FreeNAS 11, yet. According to compatibility list, PR2200 should work fine, when using powerpanel driver: http://networkupstools.org/ddl/Cyber_Power_Systems/ http://networkupstools.org/ddl/Cyber_Power_Systems/PR2200.html However, when trying to establish a connection between

The REDi Blazer 600VA (BLAZER600c) UPS found here [ro_RO]: http://www.emag.ro/ups-redi-blazer-600va-blazer600c/pd/EX5X2BBBM/ which is actually a Centralion Blazer 600VA [en_TW]: http://www.centralion.com/html/product/back-Product-ups-blazer400.htm works with the blazer_ser driver ----------shell output---------- # upsrw ups # upscmd -l ups Instant commands supported on UPS [ups]: beeper.toggle -

This UPS is already listed in the compatibility list. But I wanted to add the instant commands supported by upscmd: ============================ Instant commands supported on UPS [PW5125]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper load.on - Turn on the load immediately outlet.1.load.off - Turn off the load on

Hi all, I use an APC Back-UPS RS 800, overall my experience with NUT is very good but there is one feature I am missing: the ability to ask the UPS for a battery test. upscmd -l shows the following commands available: $ upscmd -l rs800 Instant commands supported on UPS [rs800]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS

Hello, I am having a heck of a time with false low battery alarms right now.  It has been going on for the last couple of months.  I originally started getting them with a UPS that was 1-2 years old so I thought it was time to change it out and buy a new one.  I'm still getting the false alarms with the brand new one.  The status is "OL LB" which is strange to me. I have a

Hello, Control HP R1500 G2 with nut via USB. Ubuntu 14.04.5 LTS (GNU/Linux 4.4.0-72-generic x86_64) nut V2.7.1 installed from repository /etc/nut/ups.conf [HPR1500] driver=usbhid-ups port=auto After dealing hours with this, hope this will help some : rename udev rule to higher priority and move it to its right location, reload udev rules mv /lib/udev/rules.d/52-nut-usbups.rules

On Wed, 14 Oct 2015, Davide Baldini wrote: > upsdrvctl shutdown > ... > instcmd(shutdown.return, [NULL]) > instcmd: FAILED > Shutdown failed! > Driver failed to start (exit status=1) > > This time /var/log/syslog doesn't register anything about the UPS after > issuing the command above. Instead, It logged some errors after a > upscmd -u admin -p mypass

On 1/31/15, Charles Lepple <clepple at gmail.com> wrote: > On Jan 31, 2015, at 3:09 PM, Melvin Call <melvincall979 at gmail.com> wrote: > >> One last question if you don't mind. I noticed the "default" POWERDOWNFLAG) >> is >> set to /etc/killpower, but I changed that to /tmp and modified my >> umountroot >> script to mount it read only

Hello list, just a quick email to report that the following UPS was supported (mostly) out of the box: Model: PowerWalker VI 850 LCD Driver: blazer_usb upsc Output (please note I have manually populated the high and low voltages): battery.charge: 100 battery.voltage: 13.50 battery.voltage.high: 13.5 battery.voltage.low: 10 battery.voltage.nominal: 12.0 beeper.status: enabled device.type: ups

Hello, we have a problem using APC Back-UPS CS 500 (connected via USB, usbhid-ups-apc) and UPS-NUT. We've tried different Versions of UPS-NUT (2.2.1 and 2.2.2), including the latest from SVN (28th November 2008). We've also tried apcupsd, which works fine for our requirements, but we don't want use it. What we need is simple: The UPS should turn off after power loss and shutdown

Hi, I have setup NUT in netserver mode on debian wheezy with two APC UPS units connected to it by usb. lsusb identifies the units as Smart-UPS 1000 and Smart-UPS C1500. It appears these do not use the smart protocol and usbhid-ups is the correct driver to use. System: Debian wheezy with stock version of nut (Version: 2.6.4-2.3+deb7u1) Everything works rather well, except that the

Network UPS Tools version 2.2.2-pre2 has been released. http://www.networkupstools.org/ Direct access: - Download: http://www.networkupstools.org/source/2.2/testing/nut-2.2.2-pre2.tar.gz - News: http://www.networkupstools.org/source/2.2/testing/new-2.2.2-pre2.txt - ChangeLog: http://www.networkupstools.org/source/2.2/testing/ChangeLog Arnaud and the NUT team -- Linux / Unix Expert R&D -

http://www.zigor.com/uk/index.php/en/products/upssystems/danubioseries Ships with UPSilon 2000 software, and appears to work with blazer_usb to a certain extent with the following config: [danubio] driver = blazer_usb langid_fix = 0x409 port = stupidly, I seem to have to set this even though it's ignored vendorid=0001 productid=0000 Yes, vendor 0001,