similar to: testing shutdown: pc not restarting; and "ups unavailable" messages

> When a UPS unit performs a delayed power off (NUT sets the delay to 20 seconds > by default) it deconnects its power outlets which in some UPS units produces an > audible "clunk". The display of lights on the front panel changes, and the > beeping stops. The delayed power off can be demonstrated with a light bulb or a > mains circuit tester connected to one of the

Executive summary: I am installing a UPS with NUT on Ubuntu for the first time. I could follow the instructions up to "testing shutdowns" but on executing the recommended command the computer shuts down and never comes back on, contrary to what the instructions suggest. I am also seeing regular broadcast messages on the console that the UPS is unavailable (and in the? syslog that

> It actually occurred to me that I could try this with another (any other) computer here at work, so I did. I set the BIOS to "always on" after power cut. I booted ubuntu. I did "sudo shutdown -h now" from the console. The pc switched off as expected. Then I removed the power cable and then plugged it back in. According to the theory above, this should have caused the

Hi Everyone, I recently bought a Tripp-Lite SMART1500LCD for my Linux Mint 19.3 machine, connected via a USB cable. I installed Nut 2.7.4 from the Mint package repository via sudo apt update && sudo apt install nut. Everything works great: NUT issues low battery warning when it reaches the set low battery point and then issues shutdown commands...computer shuts down..then the UPS shuts

Hi, I'm not sure if it is a bug or a feature. I'm running Ubuntu 20.04 on my RPi4 which connects to the UPS over USB. I have noticed whenever I reboot my RPi4. It resets the UPS ( I can hear the relay) -- Powerloss. Any pointers to disable this annoying bug / feature. ups.conf: --8<---- [tripp] driver = usbhid-ups port = auto vendorid = 09ae productid = 2009 bus

> >> I see at http://networkupstools.org/ddl/Cyber_Power_Systems/Value_800E.html that >> the Value 800E does not have variables such as >> load.off.delay - Turn off the load with a delay (seconds) >> load.on.delay - Turn on the load with a delay (seconds) >> >> What does command ? upscmd -l <UPS> ? report? > > I'll try this tonight when

Crossed random effects: > lmer( y ~ (1 | i1) + (1|i2) ,data=dta) Linear mixed-effects model fit by REML Formula: y ~ (1 | i1) + (1 | i2) Data: dta AIC BIC logLik MLdeviance REMLdeviance 91.18 94.84 -42.59 85.2 85.18 Random effects: Groups Name Variance Std.Dev. i1 (Intercept) 0.068224 0.26120 i2 (Intercept) 0.463112

But runs normally if started. On a rpi4 running an uptodate raspbian buster, how do I set it to auto start at boot time? Thanks. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D.

On Fri, 2 Feb 2018, nut.user.u830 at neverbox.com wrote: > I have an older box set up this way for continuous integration, and it needs to see more than a few seconds of power loss for the "always turn > on" BIOS setting to work. I forget how many different intervals I tried, but 30 seconds of off time is reliable for that particular box. > > Thanks. This

On Jun 7, 2017, at 1:14 PM, Roger Price wrote: > > 2. On the NAS, use command > > upsrw -s battery.charge.low=80 -u upsmaster -s sekret UPS Robbie, The "upsrw" command contacts upsd, so it sounds like you should be able to add a user to upsd.users on the NAS, and then run something like this on the Mac: upsrw -s battery.charge.low=80 -u upsmaster -s sekret UPS at

On Thu, 8 Jun 2017, Robbie van der Walle wrote: > The "upsrw" command contacts upsd, so it sounds like you should be able to add a user to upsd.users on the NAS, and then run something like > this on the Mac: > > ??upsrw -s battery.charge.low=80 -u upsmaster -s sekret UPS at synology > > Per?http://networkupstools.org/docs/man/upsd.users.html?,

I am having trouble with the rfImpute function in the randomForest package. Here is a sample... clunk.roughfix<-na.roughfix(clunk) > > clunk.impute<-rfImpute(CONVERT~.,data=clunk) ntree OOB 1 2 300: 26.80% 3.83% 85.37% ntree OOB 1 2 300: 18.56% 5.74% 51.22% Error in randomForest.default(xf, y, ntree = ntree, ..., do.trace = ntree, : NA not

Is anyone in the leadership of the R-project going to contact the New York Times and clarify that the article gave remarkably short shrift to the people who designed the user interface for R, to a large extent AT&T researchers from an earlier generation? It would be the appropriate thing to do. The R team did not develop the user interface for R, the designers of the S programming language

Anyone familiar with Cyberpower's model numbers? I finally got sick of my Tripplite's USB port going south, all the time, so I'm looking to replace it. The HCL has an entry for a Cyberpower model CP1500AVRLCD. Not listed is the CP1500PFCLCD model, a newer, premium version of the unit; but the HCL does have an entry for the CP1000PFCLCD model. Pretty sure that the CP1500PFCLCD

Hi I have just purchased a Cyberpower CP1300EPFCLCD UPS. It is not listed in your Compatibility List http://networkupstools.org/stable-hcl.html I am very new to all this but do have a background in IT. I have been retired for 18 years so am a bit out of touch so please excuse if I am a bit fuzzy. I will try my best to explain my issue below. When I plug my UPS into my Synology NAS

Hi, Another noob here I am afraid! I have a questuin about the current_user method that comes with AAA. I have AAA set up and working fine and if i put <%= self.current_user.login %> into a view it shows the login name as expected on the page. What I cant work out is how to record this into the database when the user completes a form. My app so far only has two models.

Hi, I'm a MGE Evolution 650 owner and, after putting in place a basic configuration for controlling my UPS, I'm going to tune a little bit better NUT for my needs. First of all let me describe my little (SOHO) scenario: I have the ISP modem/switch (providing VoIP too, so it's important to keep it running as much as possible), a small low power home server and a much hungrier PC.

Hello All, Yesterday, one of our customer's cluster(2 box) server goes down after a I/O error during the backup procedure. When we turn on the cluster again, the 600M database file have been lost, disapear. Now, I'm with one of the disks (the other was used to rebuild the database server) and need to know how can I recover any piece of data from the disk. After the crash we mount the

I think I'm going to have the slightly rejigger the tripplite-hid.c driver to 'properly' support all of the data I know about it's outlets. A given UPS may have 'n' output loads. I could have 5, I could have 10, I won't know until I actually ask the UPS. But in order to use the hid to nut struct, I'm actually going to have to modify that struct dynamically, or

Charles Lepple writes: > On Nov 12, 2017, at 10:08 AM, Sam Varshavchik wrote: > > > > The HCL has an entry for a Cyberpower model CP1500AVRLCD. Not listed is > the CP1500PFCLCD model, a newer, premium version of the unit; but the HCL > does have an entry for the CP1000PFCLCD model. > > > > Pretty sure that the CP1500PFCLCD will work; but figure I ask if anyone