similar to: Monitoring Legrand Niky S

Good morning, my name is Stefano Pongiluppi and I'm a Legrand marketing manager, specialized in UPS management systems. About two years ago, my ex colleague Gabriele Taormina, that was in touch with Daniele Pezzini, sent to you the drivers for Legrand UPS (a copy of them are in attachment), but I see that these drivers are not yet included in the Master branch of the NUT project. Could you

Hi all, I have an UPS by Legrand, model Daker DK 1 kVA, i have tried to use "nutdrv_qx" driver with usb but have no success. I will send you all the information you need to try to solve or write the correct driver. Hope to be useful. regards Andrea

Hello I am using Freenas 11.3 (freebsd like) with a GREENCELL usb ups. with nut 2.7.4_13 pre installed But, this ups is not detected as "blazer_usb" on port "auto" neither "ugen0.4"! Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Megatec/Q1 protocol USB driver 0.12 (2.7.4) No supported devices found. detail below. Another info : This

> I have an UPS by Legrand, model Daker DK 1 kVA, i have tried to use > "nutdrv_qx" driver with usb but have no success. It should be supported out-of-the-box in the next release: https://github.com/networkupstools/nut/issues/616 Meanwhile, you could try the `blazer_usb` driver, with the `krauler` USB subdriver.

On Oct 9, 2020, at 8:07 PM, Rusty Bower wrote: > > Hey all, > > I've read through as many relevant mailing list posts and public blog posts as I could, but I can't seem to find an answer to my issue. > > I currently have 2x Tripp Lite SMART1500LCDXLs, and I am attempting to monitor both of them with the same Raspberry Pi using NUT. The problem I have is there

Hello, When I issue upsdrvctl status I see a NUT version 2.6.4. I've installed NUT via apt-get install nut-server on the my Raspberry Pi running Debian Jessie. I've been looking at different monitoring systems to use. I really like the look of Open Monitoring Distribution (OMD). OMD bundles Nagios together with many addons including check_mk. I've installed the check_mk agent on

I've not been able to connect to my ups using NUT 2.7.4 or NUT 2.8.0. 2.7.4 was installed as a package, 2.8.O was compiled from source. I've messed with permissons, everything is root:root and has the approprate read/execute permissons. I've tried two differnt UPS(es) APC & CyperPower. I'm running PI OS (Raspbian) on a Raspberry Pi3 model B. The port 3493 is open (UFW). I can

Hi, I'm setting up NUT on a raspberry pi 4, following the guide here: https://melgrubb.com/2016/12/11/rphs-v2-ups/ OS version: Raspian Buster NUT version: 2.7.4.8 Installed via: apt package install Device: Legrand Keor Multiplug connected via USB The problem I am experiencing is that *NOTIFYCMD* never runs. I can connect to the device via *upsc*, and I receive WALL messages when I connect

[forwarded without attachments, for real this time] > Begin forwarded message: > > From: Gabriele TAORMINA <gabriele.taormina at legrand.com <mailto:gabriele.taormina at legrand.com>> > Subject: Re: [Nut-upsdev] Adding drivers to NUT? > Date: August 27, 2018 at 6:03:55 AM EDT > To: Daniele Pezzini <hyouko at gmail.com <mailto:hyouko at gmail.com>> >

>I just went through the same issue. Take a look at my thread. >Double check that upsmon.conf:NOTIFYCMD /sbin/upssched is not still commented. Thanks for the response, can you link to it? I'm not finding it in the search. I'm not using /sbin/upssched, I have NOTIFYCMD set up as: NOTIFYCMD /home/pi/Documents/scripts/ups-log.py and it's not commented out. On Tue, Feb 11, 2020

Hi All, I downloaded: http://mirror.centos.org/altarch/7/isos/armhfp/ for the PI3 This article says the PI3 runs X. http://news.softpedia.com/news/centos-7-linux-officially-released-for-raspberry-pi-2-banana-pi-and-cubietruck-497891.shtml When I groupinstall Gnome desktop and reboot, then run startx I get an error about no screens found. Whats the trick to get X on the PI3? Thanks, Jerry

Hey all, I've read through as many relevant mailing list posts and public blog posts as I could, but I can't seem to find an answer to my issue. I currently have 2x Tripp Lite SMART1500LCDXLs, and I am attempting to monitor both of them with the same Raspberry Pi using NUT. The problem I have is there doesn't seem to be any way in the nut.conf to differentiate between the two UPS via

I just went through the same issue. Take a look at my thread. Double check that upsmon.conf:NOTIFYCMD /sbin/upssched is not still commented. On Tue, Feb 11, 2020 at 7:00 AM <nut-upsuser-request at alioth-lists.debian.net> wrote: > Send Nut-upsuser mailing list submissions to > nut-upsuser at alioth-lists.debian.net > > To subscribe or unsubscribe via the World Wide

> When you run that command, does "some text" appear in the system log? When I run Documents/scripts/ups-log.py manually I do see the expected text echo'ed to the command line. It actually appends to a Google Sheet, not the internal log files. When I would expect to see it triggered by NOTIFYCMD, I don't see any text printed and nothing shows up at the google sheets. If

hello, i've got a problem with the notifycmd here is a part of my upsmon.conf : NOTIFYCMD /usr/local/ups/bin/nut_notify NOTIFYMSG ONLINE "UPS %s is getting line power" NOTIFYMSG ONBATT "UPS %s is on battery" NOTIFYMSG REPLBATT "The UPS %s battery is bad and needs to be replaced" NOTIFYMSG LOWBATT "UPS %s is being shutdown by the master" NOTIFYMSG FSD

Dear Daniele, I have some news regarding the Driver: I applied the patch you sent me (https://github.com/zykh/nut/tree/issue-441) and it works correctly (obviously in Level 5 of Debug I see "missing CR...etc.."). As for now there are 2 modification I'd like to suggest you: - For Online Type UPSs the Megatec protocol describes that the battery voltage is provided in the form of V

Dear Daniele, thanks a lot for your support, i have some things that are not so clear for me: - I can send you the whole sources for our UPSs, do you need only Headers and C files or also other files (i suppose Driver list)? - Seen that we had some problems with the Blazer driver (the battery voltage calculation were not correct for our UPSs) we copied it and modified a bit while changing the

[apparently the list didn't get the message, probably because it exceeds the 40kb threshold, so here it is in all its glory with my reply] On Mon, 3 Sep 2018 at 14:32, Gabriele TAORMINA <gabriele.taormina at legrand.com> wrote: > > Dear Daniele, > > > "I fixed a few issues, and pushed your changes (amended) to this > > temporary branch:

Hello, I have a Legrand Keor T [1] monitored via snmp, everything seems to work fine, upsc output looks good [2] except that I can?t get the low battery state "OB LB? as usual (it works fine with others UPS like APC or Dell). Here is the configuration : [lgups] driver = snmp-ups port = 192.168.99.60 community = public snmp_version = v2c mibs = auto

On Jan 21, 2015, at 3:41 AM, Maurizio Iacaruso <maurizio.iacaruso at gmail.com> wrote: > The ?device? is this http://www.dlink.com/it/it/business-solutions/network-storage/network-video-recorders/dnr-322l-cloud-network-video-recorder , a NVR with USB port for monitoring UPS. It doesn?t support monitoring by LAN. > So, my aim is to ?replicate? the state of the UPS, in the sense that