similar to: Heartbeat validation of NUT integrity

I've built NUT 2.8.0 from source. When the nut-monitor runs: fopen upsmon.pid fails. I'm running as root, upsmon has root:root permissions as well as the other daemons and .conf files. I've tried configuring with and without --prefixpath --prefixaltpath. Is there something I am missing? Please see attached. Dan -------------- next part -------------- An HTML attachment was

Now that upsstats.cgi works, I've noticed that dummy-ups changes state every 5 minutes between OL and OB (probably when the 300 second timer expires). The UPS state stays online. Also "online" and "onbatt" are broadcast to the console probably via WALL. (The state changes don't seem to be form the ups as upsshed-cmd doesn't run). Upssched-cmd does run when the UPS

Hi, I have been running nut successfully for a long time with my Debian 11 server. I upgraded my server to Debian 12 today, which upgraded nut also from 2.7.4-13 to 2.8.0-7. I noticed that after upgrade there was a upssched process running and taking 100% cpu time. I checked if there were any changes to configuration file formats with nut upgrade and only differences I noticed were a terminology

Hi, I ran the strace command while upssched was 100% CPU hungry. This is what I got: 1686633611.702798 read(7, "", 1) = 0 <0.000004> 1686633611.702816 read(7, "", 1) = 0 <0.000004> 1686633611.702834 pselect6(11, [7 10], NULL, NULL, {tv_sec=1, tv_nsec=0}, NULL) = 1 (in [7], left {tv_sec=0, tv_nsec=999998800}) <0.000006> 1686633611.702862 read(7,

Hi, I ran the strace command while upssched was 100% CPU hungry. This is what I got: 1686633611.702798 read(7, "", 1) = 0 <0.000004> 1686633611.702816 read(7, "", 1) = 0 <0.000004> 1686633611.702834 pselect6(11, [7 10], NULL, NULL, {tv_sec=1, tv_nsec=0}, NULL) = 1 (in [7], left {tv_sec=0, tv_nsec=999998800}) <0.000006> 1686633611.702862 read(7,

On Tue, 4 Apr 2017, Arnaud Quette wrote: > Hi Jon, Stuart and the list > > 2017-04-04 1:09 GMT+02:00 Stuart Gathman <stuart at gathman.org>: > Which NOTIFYCMD is run when there is an ALARM? > Have you specified that in your upsmon.conf? > > And that is the question of the hour.? How do you specify that?? Note > that this is not the REPLBATT

Dear list, Can't make upssched notify me on event occured. OS: Debian, 2.6.26-1-amd64 Nut: 2.4.3-1.1squeeze1 UPS: Ippon Smart Winner 3000 connected via COM On event ( plug out the cord from UPS ) upsmon detect's status change to OB and gives WALL and syslog notify, but no script starting. In syslog no errors and no upssched process occured, just upsmon. There're no PIPE and LOCK

I've not been able to connect to my ups using NUT 2.7.4 or NUT 2.8.0. 2.7.4 was installed as a package, 2.8.O was compiled from source. I've messed with permissons, everything is root:root and has the approprate read/execute permissons. I've tried two differnt UPS(es) APC & CyperPower. I'm running PI OS (Raspbian) on a Raspberry Pi3 model B. The port 3493 is open (UFW). I can

Hello All, I'm trying to establish a MASTER SLAVE configuration of UPS using NUT Driver. I'm able to shutdown the master after UPS is on BATTERY ( POWER BLACKOUT) .However I'm trying to shutdown the other SLAVE MACHINES BEFORE MASTER. But at the remote side ( Slaves ) shutdown after UPS blackout does not happen. My configuration in Master are /usr/etc/upsd.users

Hi, I want to test the events off my UPS. I define In upsmon.conf: RUN_AS_USER root NOTIFYCMD /sbin/upssched NOTIFYMSG ONLINE "UPS %s on line power" NOTIFYMSG ONBATT "UPS %s on battery" NOTIFYMSG LOWBATT "UPS %s battery is low" # NOTIFYMSG FSD "UPS %s: forced shutdown in progress" NOTIFYMSG COMMOK "Communications with UPS %s established"

On 04/04/17 14.10, Roger Price wrote: > On Tue, 4 Apr 2017, Arnaud Quette wrote: > [cuuuuut] > Hi Arnaud, It seems to me that, looking out into the future, there are three > things upsmon needs: > > 1. A fall-through <notify type> of "UNKNOWN" so that all status changes, no > matter how wierd, can be caught. Such a catch-all <notify type> would also

Hi, I was trying to hack the /etc/rc.d/init.d/halt script under RH 9.0 in a way to achieve a clean shutdown: - commanding the RAID arrays to readonly mode - turning off my hardware watchdog, ... etc. See details below. At the end of all this preparation, and very close to the last lines of the halt script, I would then issue: 1. /usr/bin/belkinunv -x wait /dev/ttyS0 2. (OR, with a smart ups:

Was /etc/nut/upssched-cmd automatically installed? I don't have it on my raspberry pi. :-( On 2019-04-03 1:54 p.m., Mike wrote: > I figured this out and it is working now.  This fix seems strange to me > and is possibly a bug.  I'm sharing in case it might help others. > > I had to uncomment all of the NOTIFYFLAG statements whether I was > changing them or not. 

I've setup nas4free (latest version 11.0.0.4, which has NUT 2.7.4) in a VM and configured it via webinterface to my APC UPS and set "shutdown mode" to "UPS goes on battery" with a timer of 30s. Then I started runtime calibration on the UPS and after 30s nas4free has shut down! I think this is not the correct behavior, since the status was "OB CAL". The system

> What do your configuration files look like? Setting MINSUPPLIES to 2 should work. You can run upsmon with a debug level of 3 or greater, and it will print the current and minimum "power value", which is what determines when to shut down. > > Also, if you don't want to wait for both UPSes to drain to the low battery state, you can set up a pair of dummy-ups drivers. I'm

Greetings! I have successfully installed and configured nut package. All i want now is to power off ups. If i run upsmon -c fsd as root - everything goes fine, system and ups gracefully shutting down. If i unplug power cable from an ups, then system is down, but ups still on load. Any help would be appreciated. Debian Lenny x86 ups.conf [ippon] driver = megatec port = /dev/ttyS0

Hi all, I would like to check two UPS in two different buildings with an ubuntu server. I use SNMP on both UPS. The cgi-page displayed all information as expected, but if I pull the fuse for one UPS in building A, none action occur. I expected that I get a mail "UPS A on Batt" and that after 5 minutes the shotdownscript starts. But no action. I saw that there is no upsmon process

those mails list are from last century but i give it a try ! created : https://github.com/networkupstools/nut/issues/563 Hello all, Trying to run an EATON 850pro via USB on a Debian Stretch Stable. I have letsencrypt certificate installed and working. When trying to manage the EATON device, i got: upsmon Can not initialize SSL context When 850pro is connected via USB, i can: lsusb Bus 009

Now I have this in /etc/nut/upsmon.conf (my QNAP NAS wants admin and 123456 or not working) RUN_AS_USER root MONITOR qnapups at localhost 1 admin 123456 master MONITOR qnapups at 192.168.222.252 3493 admin 123456 slave MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG /etc/killpower NOTIFYFLAG ONLINE SYSLOG+EXEC