similar to: Tripplite SNMP Webcard and NUT

These patches allow this device to function in nut.. diff --git a/trunk/drivers/tripplite-hid.c b/new/drivers/tripplite-hid.c index c36da98..dddd13c 100644 --- a/trunk/drivers/tripplite-hid.c +++ b/new/drivers/tripplite-hid.c @@ -71,6 +71,8 @@ static usb_device_id_t tripplite_usb_device_table[] = { { USB_DEVICE(TRIPPLITE_VENDORID, 0x2005), battery_scale_0dot1 }, /* e.g. TrippLite

With a little delay, here's the announcement for out 3.0.24 packages. English version below. Samba 3.0.24 ist soeben ver?ffentlicht worden. RPM-Pakete f?r diverse SUSE und RedHat-Versionen sowie f?r Debian GNU/Linux k?nnen von http://ftp.sernet.de/pub/samba/ heruntergeladen werden. Pakete f?r S390 folgen in K?rze. Dieses Samba-Release behebt einige Fehler, darunter: * einen

hi! sometimes we've on some client-servers hanging uninterruptible processes ("ps aux" stat is on "D" ) and on one the CPU wait I/O grows within some minutes to 100%. you are not able to kill such processes - also "kill -9" doesnt work - when you connect via "strace" to such an process, you wont see anything and you cannot detach it again. there

Hey, I am wondering if anyone gotten nut to work with a Tripp Light Smart Pro 2U Rack/Towers (SMART2200RMXL2U). If so which driver did you use, or what driver do you think I should try? Also when trying use a nut driver, do you have to be a nut user? Thanks, Ricky -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm running Fedora Core 6 and need to monitor a Tripp Lite SMART2200RMXL2U. I've loaded the nut-2.0.3-2.1 RPM. The UPS is connected via the provided USB cable, and that much appears to work: # dmesg | grep -i tripp hiddev96: USB HID v1.10 Device [Tripp Lite TRIPP LITE SMART2200RMXL2U ] on usb-0000:00:1f.4-2 # lspci | grep -i usb 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM

Hi again, I`m a bit confused how to store a SSHA256 password in the database and I can`t find any information in the wiki. Do I have to store the SHA256 hash and the salt separately (what would the password_query be like in this way) or just the final SSHA256 hash? Regards Patrick

Hello. I'm new to nut and don't know if I've missed something in setting it up or if my ups isn't quite supported. I'm using these: - svn version of nut (downloaded on 9/13/06) - a tripp lite SMART2200RMXL2U - debian sarge with 2.6.8 kernel - the tripplite_usb driver (newhidups says my ups is not supported) I figured out how to get the device perms correct.

Hello, I have found that I need to be able to control a TrippLite SMART2200RMXL2U ups, with an external battery. I found recently after trying to communicate that many of the bits I would care about (the output ports/loads) wheren't exposed in the current driver. I also happen to have the Web/SNMP card, which allows me to change many of the settings via ssh/http interfaces. I'm

Just built and installed nut 2.4.1 with a usb.conf that looks like [trippb] driver = usbhid-ups port = auto desc = "Tripp Lite SmartPro 2200RMXL2U" The OS is Ubuntu 8.04.2 with kernel version 2.6.24. When trying to start the driver I get $ sudo ./upsdrvctl start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Generic HID driver 0.34 (2.4.1)

I'm working on a gentoo server with Nut 2.0.5-r1 and libusb-0.1.12. I originally tried the hidups driver which seemed to work, but produced a large amount of unhandled events. Then I tried the newhidups which told me my ups wasn't supported. When I try using tripplite_usb -u root -DDDD /proc/bus/usb/002/002 I get that there isn't a match. But when I try using tripplite_usb -DDDD

Citeren Arnaud Quette <aquette op alioth.debian.org>: > Modified: trunk/drivers/tripplite-hid.c > ============================================================================== > --- trunk/drivers/tripplite-hid.c (original) > +++ trunk/drivers/tripplite-hid.c Sun Mar 1 19:56:31 2009 > @@ -84,6 +84,8 @@ > > /* HP R/T 2200 INTL (like SMART2200RMXL2U) */ > {

On Oct 15, 2013, at 3:40 PM, Eric Cobb wrote: > My name is Eric Cobb and I am a Product Specialist with Tripp Lite. We have tested your latest NUT distributions against our HID USB compatible UPS systems and would like to know what is needed and/or who is needed to contact in order to updated the listing of compatible Tripp Lite UPS systems in your HCL list? Hi Eric, From end users of NUT,

Hello, My name is Eric Cobb and I am a Product Specialist with Tripp Lite. We have tested your latest NUT distributions against our HID USB compatible UPS systems and would like to know what is needed and/or who is needed to contact in order to updated the listing of compatible Tripp Lite UPS systems in your HCL list? Best Regards, Eric K. Cobb Product Management Specialist [Tripp Lite] 1111

> > battery.charge: 3 > battery.charge.low: 10 > battery.charge.warning: 30 > battery.runtime: 93 > battery.temperature: 32.9 > battery.type: PbAC > battery.voltage: 46.4 > battery.voltage.nominal: 48.0 Is it possible that battery.charge is really 30% rather than 3%? The 3016 protocol models have issues with scaling on some of the voltages and frequencies. You can see

I'm happy to have had a quick look at this thread... 2007/5/17, Peter Selinger <selinger at mathstat.dal.ca>: > ... > as you know, I haven't had much time to work on NUT. Now my wife is > expecting our first baby in 1 week, so I don't think I will get back > to it in the foreseeable future. I didn't knew before! what a good news: all my congratulations to you

Hi, Peter Lister <P.Lister at sychron.com> schrieb am 06.02.02: > In way way better and easier? When I have criticised pxelinux I think > I've always stated *why* etherboot seems better for our environment. > > I'm not trying to be religious, or get anyone to change a working system > - I'm genuinely interested what differences others perceive. I've looked

Has anyone had any success with the HP T/R2200 G2? I have used the T/R2200 with nut a few times before and it works great, but the G2 doesn't want to talk to me. I have tried bcmxcp from 2.0.4, 2.2.2, and svn, as well as the usb drivers. Maybe the G2 isn't a rebadged powerware unit? Thanks James

Has anyone had any success with the HP T/R2200 G2? I have used the T/R2200 with nut a few times before and it works great, but the G2 doesn't want to talk to me. I have tried bcmxcp from 2.0.4, 2.2.2, and svn, as well as the usb drivers. Maybe the G2 isn't a rebadged powerware unit? Thanks James

I'm constructing a Web server which may require restricted areas of the site to be used from public places where a password might be sniffed. The damage that could be done by taking snapshots of the content from one session with a spy program is minimal. What the owner of the server does NOT want, though, is to allow unauthorized parties to gain unfettered access by stealing the password via

Hello, I wanted to see if there's any chance that NUT will support a few new TrippLite UPSes that we just bought: Sep 9 01:42:25 miko /kernel: uhid0: TRIPP LITE TRIPP LITE OMNIVS1500XL, rev 1.1 I grabbed the devel sources via cvs, but am having trouble building it when I enable the "newhidups" driver: gmake[1]: Leaving directory `/usr/local/src/nut/common' drivers/