similar to: UPS is not turned off in slave-only configuration?

On Mittwoch, 22. Juni 2016 17:50, Roger Price wrote: On Wed, 22 Jun 2016, Andr? H?nsel wrote: > > Now, what I see is that when the UPS feeding server-1 goes LB, > > server-1 is indeed shut down, but it seems that the UPS is never switched off. > > > > This is a problem because when power is restored after shutdown, but > > before the battery runs out (with no

Hi I'm having a problem with the bcmxcp_usb driver FSD command: everything seems to work apart from: upsmon -c fsd Environment: Ubuntu 7.04, nut 2.0.5-1, nut-usb 2.0.5-1, Powerware 3105 UPS. upsd appears to send the FSD command to the UPS, upsmon then runs my NOTIFYCMD (which halts my PC) but the UPS just doesn't turn off. Here are the /var/log/daemon.log entries: Jul 24 23:13:16

Hello, I'm experiencing a strange early shutdown behavior with the following system: * */OS/*: Slackware Linux 14.2 x86_64 * */NUT/*: 2.7.4 (from my own package <https://sotirov-bg.net/slackpack/pack.cgi?id=4083>) * */UPS/*: MGE Ellipse PRO 1600 <powerquality.eaton.com/Products-services/Backup-Power-UPS/Ellipse-PRO.aspx> (bought in September 2017) */Problem

I have three APC SmartUPS 5000s. Two of them are AP9617 and one is AP9619. I have a RS-232 connections from my monitor host to all three. All three report status and give information. One of the two AP9617 - ups3-1 - does not shut down when FSD is sent. It did when I first set this system up a year or two ago but it's stopped doing so since then. Resetting the management interface does not

Hi, I'd like to better understand the merits of NUT clients (slaves) properly authenticating with the NUT server (master). NUT allows clients to retrieve UPS status (upsc ups at 10.10.10.1) without authenticating, shutdowns are properly trigger via polling. From testing one apparent benefit of authenticating is the client receives the shutdown event more quickly rather than the polling

upsmon.conf on server:  https://pastebin.com/z4CrUTxb nut.conf on server:  https://pastebin.com/540ShZH7 Permissions for /etc/nut:  https://hastebin.com/qecolodapi.diff On the Synology (I didn’t edit any of these files): ups.conf:  https://hastebin.com/dedereqizi.shell upsd.conf:  https://hastebin.com/pupeseweda.css upsd.users:  https://hastebin.com/ocenamecex.cs I don’t think I am able to run

On Feb 9, 2015, at 6:48 AM, PERE (yahoo.es) <pererivers at yahoo.es> wrote: > 0.028188 Can't set USB configuration: could not set config 1: Device or resource busy > 0.029246 detached kernel driver from USB device... > 0.030559 USB device [0001:0000] opened > 0.866216 read: (8 bytes) => 03 00 00 00 00 00 00 00 > 0.866413 reply[0] = 0x03

I've googled and RTFM'ed, but still can't solve this one. I hope you folks can. This affects my entire computer cluster, but let's start simple: I've got a computer running NUT; OS is Scientific Linux 5.5; kernel 2.6.18-274.12.1.el5xen. It connects to an APC SMART-UPS via an APC SmartCard using the snmp-ups driver. It generally works: upsmon will detect if the battery is low

On Jan 9, 2014, at 4:00 PM, Lonnie Abelbeck wrote: > Hi, > > I'd like to better understand the merits of NUT clients (slaves) properly authenticating with the NUT server (master). > > NUT allows clients to retrieve UPS status (upsc ups at 10.10.10.1) without authenticating, shutdowns are properly trigger via polling. > > From testing one apparent benefit of

I have the latest version of the Windows port of NUT installed on my Windows?7?machine. The UPS is connected via serial cable to the Windows machine. I also have my Synology NAS (which uses NUT) connected over the local network as a slave to the Windows NUT master. The Synology slave is configured to immediately go into "safe mode" whenever an FSD or OB+LB indication is received from the

Hi thanks Roger. Well I'm just using Ubuntu Server 16.04 LTS I only ran that command as a few guides say that's how to establish if a daemon is compiled with tcp wrappers: https://www.cyberciti.biz/faq/tcp-wrappers-hosts-allow-deny-tutorial/ I haven't really used TCP wrappers before so I'm not even sure if my hosts.allow entries are correct: upsd : ipaddressofclientgoeshere ups

Dear Chales, Thanks for your quick reply. I have Raspberry with last Kernel [Linux pi1 3.18.6+ #753 PREEMPT Sun Feb 8 14:47:22 GMT 2015 armv6l GNU/Linux] If <upsdrvctl>, <upsd> and <upsmon> are stopped <nutdrv_atcl_usb> Works well without any error as "Device or resource busy". If I run <upsc> command never receive any value from my ups <upsc ups at

On Wed, 22 Jun 2016, Andr? H?nsel wrote: > Now, what I see is that when the UPS feeding server-1 goes LB, server-1 is > indeed shut down, but it seems that the UPS is never switched off. > > This is a problem because when power is restored after shutdown, but before > the battery runs out (with no load, it continues for quite a while), > server-1 is not rebooted. I'm

Try ALL:ALL in /etc/hosts.allow temporarily. If that still doesn't work, it's likely something else. If it does, only then screw with creating narrow rules . . . - Tim On November 25, 2016 6:37:02 AM CST, Roger Price <roger at rogerprice.org> wrote: >On Fri, 25 Nov 2016, Jonah Naylor wrote: > >> upsd : ipaddressofclientgoeshere > >If it were me I would write >

An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20120104/34be491b/attachment.html>

Greetings! I have successfully installed and configured nut package. All i want now is to power off ups. If i run upsmon -c fsd as root - everything goes fine, system and ups gracefully shutting down. If i unplug power cable from an ups, then system is down, but ups still on load. Any help would be appreciated. Debian Lenny x86 ups.conf [ippon] driver = megatec port = /dev/ttyS0

Bill S wrote, On 4/15/2014 11:18 AM: > The problem is that when I run upsset.cgi I first get a prompt for > user name and password. I then enter the same username and password > as I established in upsd.users and it seems to accept it. upsset.cgi doesn't check that user/password is valid, it just tries it when doing a command. I just tested it, it is working for me on a remote and

Hi, usually I use rsync with -a but recently I used it without this option and discovered that the same files are synced over and over again (as shown by -v). Of course the rsync algorithm avoids the traffic but the files are all listed. As soon as I use -a for one time those files are not transferred again, even when I remove the -a again. So I suspect, when building the file list, rsync

Hi thanks Roger, I've amended my hosts.allow file to your suggested one - thanks for that. I'm still getting "Connection refused on the client cgi screen as well as in the shell it gives me UPS upsname at ipaddresshere is unavailable... Any ideas what I can try next to debug why it's not working. Also should the "allowfrom = clientIPaddresshere" line be in my monuser

Hi thanks for helping. I don't think nut is built with TCP wrappers support, although the package is listed as depending on libwrap... I ran this command: ldd /sbin/upsd | grep libwrap.so and it has returned no output. Does this mean I have to compile from source or is there a way to add the tcp wrapper support? Thanks again. On 24 November 2016 at 22:40, Roger Price <roger at