similar to: cannot get APC ups status change via usb cable from RaspberryPi

Displaying 20 results from an estimated 10000 matches similar to: "cannot get APC ups status change via usb cable from RaspberryPi"

2016 May 31
2
cannot get APC ups status change via usb cable from RaspberryPi
Hi All, I get very strange UPS problem from RspberryPI mode B (both version 2 and 3). Here is our environment: OS: Raspbian 8.0, Ubuntu 16.04 and Ubuntu 14.04 Platform: RaspberryPi Mode B version 2 and version 3 NUT: tested version 2.6.3, 2.7.1 and 2.7.2 (from
2016 Jun 01
0
cannot get APC ups status change via usb cable from RaspberryPi
On May 31, 2016, at 1:11 AM, Tomas Tang <myhnet at gmail.com> wrote: > > Hi All, > > > > I get very strange UPS problem from RspberryPI mode B (both version 2 and 3). > > > > Here is our environment: > > > > OS: Raspbian 8.0, Ubuntu 16.04 and Ubuntu 14.04 > >
2016 May 30
0
cannot get APC ups status via usb cable from RaspberryPi
Hi All, I get very strange UPS problem from RspberryPI mode B (both version 2 and 3). Here is our environment: OS: Ubuntu 16.04 and Ubuntu 14.04 Platform: RaspberryPi Mode B version 2 and version 3 NUT: tested version 2.6.3, 2.7.1 and 2.7.2 (from
2016 Feb 15
0
APC Back-UPS BX1400U
Sorry, I forgot this: torsten at raspberrypi:/ $ sudo /lib/nut/usbhid-ups -a UPS -x vendorid=051d -DD Network UPS Tools - Generic HID driver 0.38 (2.7.2) USB communication driver 0.32 0.000000 debug level is '2' 0.004718 upsdrv_initups... 0.007534 Checking device (051D/0002) (001/004) 0.008910 - VendorID: 051d 0.010030 - ProductID: 0002 0.011196
2016 Feb 15
2
APC Back-UPS BX1400U
Dear list, since some days I own an APC Back-UPS BX1400U. Now I try to connect my Raspberry Pi to it using NUT, but ... ;) The UPS is connected via an USB-cable, and "lsusb" shows an APC device. NUT is installed via "sudo apt-get install nut". My goal: a Synology DiskStation DS1515+ should "read" UPS-data provided from the Raspberry an shut-down itselt at 30%
2017 Apr 26
0
APC Back-UPS XS1300 battery behaviour on test shutdown
Hi there, Seeing an odd behaviour when running upsmon -c fsd to test my Raspberry Pi (running Jesse Lite) setup as a upsmon master, attached via USB to an APC Back-UPS XS1300. The Raspberry Pi is plugged into the Master outlet on the APC. The UPS clicks onto battery (and the fan spins up) for a few minutes, then resets, then repeats again, while finally remaining on AC power afterwards. The
2016 Feb 20
1
APC Back-UPS BX1400U
On Feb 16, 2016, at 12:57 AM, T. Ermlich <pelegrine at gmail.com> wrote: > > Sorry for the email only send to you, Charles! > Here's the one for the list. I realize it is no longer a common list configuration. Feel free to use "Reply All" in Gmail - I won't get two copies. > torsten at raspberrypi ~ $ uname -a > Linux raspberrypi 4.1.13-v7+ #826 SMP
2018 Aug 23
2
APC Back-UPS CS 650 offdelay and startdelay
W dniu 23.08.2018 o 02:16, Charles Lepple pisze: > > For some reason, this is being hardcoded to 1: > > drivers/apc-hid.c- /* used by APC BackUPS CS */ > drivers/apc-hid.c: { "shutdown.return", 0, 0, "UPS.Output.APCDelayBeforeReboot", NULL, "1", HU_TYPE_CMD, NULL }, > > Can you rebuild the NUT drivers as described here?
2018 Aug 23
0
APC Back-UPS CS 650 offdelay and startdelay
On Aug 22, 2018, at 1:20 PM, Karol Olszewski <karol.olszewski at ipflow.pl> wrote: > > W dniu 22.08.2018 o 14:41, Charles Lepple pisze: >> /lib/nut/usbhid-ups -a apc -DDD -k > Please see attachement. 1.872180 Report[buf]: (2 bytes) => 40 00 1.872196 Path: UPS.Output.APCDelayBeforeReboot, Type: Feature, ReportID: 0x40, Offset: 0, Size: 8, Value: 0 [...] 1.872439
2018 Aug 24
0
APC Back-UPS CS 650 offdelay and startdelay
On Aug 23, 2018, at 10:46 AM, Karol Olszewski <karol.olszewski at ipflow.pl> wrote: > > W dniu 23.08.2018 o 02:16, Charles Lepple pisze: >> >> For some reason, this is being hardcoded to 1: >> >> drivers/apc-hid.c- /* used by APC BackUPS CS */ >> drivers/apc-hid.c: { "shutdown.return", 0, 0, "UPS.Output.APCDelayBeforeReboot", NULL,
2016 Feb 16
0
APC Back-UPS BX1400U
Sorry for the email only send to you, Charles! Here's the one for the list. torsten at raspberrypi ~ $ uname -a Linux raspberrypi 4.1.13-v7+ #826 SMP PREEMPT Fri Nov 13 20:19:03 GMT 2015 armv7l GNU/Linux torsten at raspberrypi ~ $ Cheers, Torsten Charles Lepple <clepple at gmail.com> schrieb am 15.02.2016 21:46: > On Feb 15, 2016, at 12:55 PM, T. Ermlich <pelegrine at
2019 Sep 10
0
raspberry pi and tripplite_usb
On Sep 10, 2019, at 10:40 AM, grumpy at mailfence.com wrote: > > i have a OMNIVS1500XL > i have used nut for several years on a full sized pc with no problems > i am trying to get nut working with this ups on a raspberry pi > i tried with a pi 3b running raspbian stretch > i tried with a pi 3b running raspbian buster The “unable to handle kernel paging request” points to a
2007 Jan 12
1
Trouble connecting to apc smart 1500 via serial cable
Hello. I've been running a two machine setup with a mge-shut for some time without problems, and now I'm configuring a three machine setup with an APC Smart 1500. The UPS has three machines connected to it, in a peculiar way: one windows machine is connected via USB. The second windows machine is using an agent to monitor messages from the first windows machine. Then, I have a GNU/Linux
2005 Aug 08
1
Here are CORRECT APC cable diagrams
+-----------------------------------------------------------------+ | | | Black APC 940-0024C Smart Signalling UPS Cable Wiring Diagram | | This information is verified and tested to be 100% correct. | | |
2016 Feb 15
2
APC Back-UPS BX1400U
On Feb 15, 2016, at 12:55 PM, T. Ermlich <pelegrine at gmail.com> wrote: > > torsten at raspberrypi:/ $ sudo /lib/nut/usbhid-ups -a UPS -x vendorid=051d -DD > Network UPS Tools - Generic HID driver 0.38 (2.7.2) If the driver is crashing, you might be affected by this bug: https://github.com/networkupstools/nut/issues/258 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=812604
2018 Apr 12
0
PowerWalker VI 1500 LCD NUT problem detecting device
Hi all, can anybody sugggest a proper solution to the problem described here: http://nut-upsuser.alioth.debian.narkive.com/wIMnftV0/installing-nut-for- powerwalker-vi-1500-lcd Righet now I am trying to make it go and running on version: root at raspberrypi:/home/pi/deb# apt-cache policy nut nut: Installed: 2.7.2-4 Candidate: 2.7.2-4 Version table: *** 2.7.2-4 0 500
2023 Jun 10
1
Fopen upsmon.pid - no such file or directory - Nut 2.8.0 built from source
I've built NUT 2.8.0 from source. When the nut-monitor runs: fopen upsmon.pid fails. I'm running as root, upsmon has root:root permissions as well as the other daemons and .conf files. I've tried configuring with and without --prefixpath --prefixaltpath. Is there something I am missing? Please see attached. Dan -------------- next part -------------- An HTML attachment was
2013 Jul 18
1
raspberrypi
hi, any one had luck using raspberrypi as mp3 source by configuring darkice or liquidsoap... if you are succeed or have an idea about it, please share... Thank You -Ashwin. +91-9959166266 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/icecast/attachments/20130718/6efa6500/attachment.htm
2019 May 02
0
NUT on Raspberry PI 3b+
I was able to make NUT and my Powercom SPIDER UPS (USB port) work under the Raspberry Pi Desktop (Debian). Everything works in VMware Workstation 15 Player. But my Raspberry Pi 3b + (with raspbian) doesn’t work with the same UPS, and with same NUT configuration. Raspberry sees the UPS, but the driver does not cling. Here is the response of Raspberry 3b + to some commands. pi at raspberrypi:~
2018 Aug 22
2
APC Back-UPS CS 650 offdelay and startdelay
W dniu 22.08.2018 o 14:41, Charles Lepple pisze: > /lib/nut/usbhid-ups -a apc -DDD -k Please see attachement. -- Karol Olszewski ipflow.pl -------------- next part -------------- A non-text attachment was scrubbed... Name: APC_BackUPS_CS_650_fsd.log.gz Type: application/gzip Size: 5735 bytes Desc: not available URL: