similar to: Fwd: Forward of moderated message

Displaying 20 results from an estimated 1000 matches similar to: "Fwd: Forward of moderated message"

2018 Jul 31
0
Adding drivers to NUT?
Dear Daniele, I have some news regarding the Driver: I applied the patch you sent me (https://github.com/zykh/nut/tree/issue-441) and it works correctly (obviously in Level 5 of Debug I see "missing CR...etc.."). As for now there are 2 modification I'd like to suggest you: - For Online Type UPSs the Megatec protocol describes that the battery voltage is provided in the form of V
2018 Jul 26
5
Adding drivers to NUT?
Dear Daniele, nice to meet you, I'm a collegue of Gabriele. The problem with "blazer_usb" driver ("blazer_ser" works correctly) is related to the following commands: - "F" and "I": when the KRAULER subdriver check these UPS answers it uses wrong constants to check the lenght of the received packets, so these commands are considered as "not
2018 Jul 11
2
Adding drivers to NUT?
Dear Daniele, thanks a lot for your support, i have some things that are not so clear for me: - I can send you the whole sources for our UPSs, do you need only Headers and C files or also other files (i suppose Driver list)? - Seen that we had some problems with the Blazer driver (the battery voltage calculation were not correct for our UPSs) we copied it and modified a bit while changing the
2018 Sep 03
0
Adding drivers to NUT?
[apparently the list didn't get the message, probably because it exceeds the 40kb threshold, so here it is in all its glory with my reply] On Mon, 3 Sep 2018 at 14:32, Gabriele TAORMINA <gabriele.taormina at legrand.com> wrote: > > Dear Daniele, > > > "I fixed a few issues, and pushed your changes (amended) to this > > temporary branch:
2018 Jul 24
2
Adding drivers to NUT?
Dear Daniele, i understand perfectly, i'd like to explain you why we choosed to clone the blazer_usb driver: some of our devices uses Voltronic Q1 protocol and we tried the Krauler Subdriver (it was the one with the right "commands", Q1, F, etc.), but the issues were 2: - first: the Krauler Subdriver expects a different number of bytes in answer because in debug i see "Short
2018 Jul 04
2
Adding drivers to NUT?
Dear Admin, I'm working for Legrand UPS and i would like to know the correct procedure to send you some drivers source files to be added in the NUT software, this to extend support also to our UPSs. Thanks in advance, waiting for a response! Best Regards, Gabriele Taormina UPS Strategic Business Unit Field Application Engineer Phone: +39 0522/207046 Fax: +39 0522/207005
2020 Jun 11
0
Legrand UPS drivers
Good morning, my name is Stefano Pongiluppi and I'm a Legrand marketing manager, specialized in UPS management systems. About two years ago, my ex colleague Gabriele Taormina, that was in touch with Daniele Pezzini, sent to you the drivers for Legrand UPS (a copy of them are in attachment), but I see that these drivers are not yet included in the Master branch of the NUT project. Could you
2018 Jul 18
2
Adding drivers to NUT?
Dear Daniele, I'm trying to create a subdriver for 'nutdrv_qx' instead of modifying the Blazer as you suggested, but i honestly don't understand how to integrate usb-serial devices (some of our UPSs have USB but serial protocol Q1). i understand the serial version but not the USB one. i also checked the "Claim" function, but i can't see drivers that uses the VID
2018 Sep 01
0
Adding drivers to NUT?
> sorry for the delay, I forgot to put the automatic response (I was on holiday), here's a description of what we made and the drivers we used to start from: No problem for the delay... I fixed a few issues, and pushed your changes (amended) to this temporary branch: https://github.com/zykh/nut/tree/issue-441+legrand Let me know if I misunderstood anything... > - usbhid-ups --> we
2013 Apr 02
3
blazer driver: Possible bugs with battery packs
Hello all, long time away from this list, glad to be around again! I have this Powercom Vanguard VGN VGD-20K31. Some details of this model: * 3-phase input, single phase output * Model has 240V / 12V9AH x 20 x 2SET, plus another set of 20 batteries. All in all, 3 sets * Serial connection to Windows 2k3 server with UPSMon Now I was strongly considering replacing the bundled no-good upsmoon
2013 Apr 22
0
Fwd: Not receiving real data from a Eaton E series DX 1000H UPS
On 18.4.2013 ?. 22:24 ?., Arnaud Quette wrote: > > 2013/4/18 Pladi Computers Ltd. <pladi at lovechnet.com > <mailto:pladi at lovechnet.com>> > > UPS: > http://www.eaton.com/Eaton/ESeriesUPS/DXUPS/index.htm?wtredirect=www.eaton.com/DXUPS > > I have the same problem on two different computers. The first one > is running Ubuntu 12.10 i386 , the
2005 Dec 19
1
MGE Pulsar ES 8+
Hi! I have a MGE Pulsar ES 8+ UPS. Here is the response of some commands: - Si --> 3000 44 0 - Si 1 --> Pulsar ES8+ 0 - Ai --> 5 0 It's not recognized very well by the current (from CVS) mge-utalk driver: [root@srv01 ~]# /home/rog/src/nut/drivers/mge-utalk -i 20 -DDD -u root /dev/ttyS0 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.86 (2.1.0) debug level is '3'
2010 Feb 08
1
megatec and blazer drivers for (brand)Tuncmatik (series)Newtech Pro 1KVA
Hi, I would like to report that Tuncmatik Newtech Pro 1 KVA (http://www.tuncmatik.com/en-US/productDetail.asp?RecID=290) works with nut(2.4.1) blazer_usb, blazer_ser and megatec drivers. The UPS came with an usb cable and a java based software for both linux and windows, named ViewPower (http://www-power-software-download.com). This UPS has double interface a USB interface and a serial
2006 Jul 11
2
notifycmd problem
hello, i've got a problem with the notifycmd here is a part of my upsmon.conf : NOTIFYCMD /usr/local/ups/bin/nut_notify NOTIFYMSG ONLINE "UPS %s is getting line power" NOTIFYMSG ONBATT "UPS %s is on battery" NOTIFYMSG REPLBATT "The UPS %s battery is bad and needs to be replaced" NOTIFYMSG LOWBATT "UPS %s is being shutdown by the master" NOTIFYMSG FSD
2016 May 20
1
ups.status don't switch to "OB LB"
Hello, I have a Legrand Keor T [1] monitored via snmp, everything seems to work fine, upsc output looks good [2] except that I can?t get the low battery state "OB LB? as usual (it works fine with others UPS like APC or Dell). Here is the configuration : [lgups] driver = snmp-ups port = 192.168.99.60 community = public snmp_version = v2c mibs = auto
2017 Oct 26
0
Monitoring Legrand Niky S
Hello, I would like to monitor my UPS Legrand Niky S from a Raspberry Pi3 but I have not found it in the compatibility list. Has anyone been able to monitor an UPS Legrand using NUT? Your help would be greatly appreciated. Thanks, Daniele
2005 Nov 08
1
message command
hello i've got a problem with the "message command "option here is my config in smb.conf message command = /usr/local/samba/var/popup/get_popup "%f" "%t" "%s" "%I" & and the get_popup script date=`date +%d-%m-%Y` heure=`date +%H:%M` machine=$1 destinataire=$2 message=`cat $3` ip=$4 infos=`/usr/local/samba/bin/nmblookup -A $ip | grep
2006 Jul 10
1
script init
hello, i'm looking for a script to launch upsdrvctl, upsd and upsmon. i dont find anything for a mandrake. does anybody have this kind of script thank you -- ---------------------------------------------------- Pascal Legrand *IUT de Chartres* - _Service Informatique_ ---------------------------------------------------- 1, place Roger Joly 28000 Chartres Tel : 02 37 91 83 36 - Fax: 02 37
2017 Jan 04
0
Guardian LCD 1500 AP ( IGA1500LCD )
Hello In case anyone is interested and for the sake of updating the documentation from http://networkupstools.org/stable-hcl.html , I would like to report that nut v2.7.4 talks successfully ( at least partially ) with the UPS from $topic, which is part of the product line from http://www.informups.com/guardian_guardian_lcd600va_2000va.html ( Inform is a Turkish manufacturer that was
2008 Jun 10
2
Phoenix Ph1200upsb serial
Hi, i just got a Phoenix Technologies PH1200UPSB 1200va serial-port ups and it is only partially supported by bestups driver (needs manual ID or driver rewriting). It comes with a tool called UPSilon 2.1 on a CD (which worked better with TERM=linux). After [sl]tracing it i came to these results: COMMANDS : - Command: I Response: "#XPHOENIX TECH PH1200UPS VER2.00C " - Command: F